Marchetti MVT

Marchetti MVT/SIAI S.50
The Marchetti MVT after its 1922 redesignation as the SIAI S.50.
Role Fighter
National origin Italy
Manufacturer Vickers-Terni and SIAI
Designer Alessandro Marchetti (1884-1966)
First flight 1919
Primary user Corpo Aeronautico Militare

Regia Aeronautica (Italian Royal Air Force)

Number built 3


The Marchetti MVT, later renamed SIAI S.50, was an Italian fighter of 1919 and the early 1920s.

Design and development

Alessandro Marchetti (1884–1966) designed the MVT (for "Marchetti-Vickers-Terni"), a single-seat, all-metal biplane with its fuselage suspended between the upper and lower wings. The after part of the fuselage itself was flattened to serve as an airfoil. The semi-elliptical wings were extremely thin in section and employed wing warping to allow lateral control, and the aircraft had all-moving tail surfaces.[1] The MVT was powered by an SPA 6a water-cooled engine rated at 164 kilowatts (220 horsepower) driving a two-bladed propeller, and was armed with two fixed, forward-firing 7.7 millimeter (0.303-inch) Vickers machine guns synchronized to fire through the propeller.[2]

Vickers-Terni at La Spezia constructed the MVT, which first flew in 1919. On 9 December 1919 it reached a maximum speed of 250 kilometers per hour (155 miles per hour), an unofficial world speed record which was denied official status because no representatives of the Fédération Aéronautique Internationale—the world governing body for aeronautics—were present to certify the speed.[2]

In 1920, Marchetti redesigned the MVT, giving it wings of longer span and splayed interplane bracing struts, a new cabane structure, and a more powerful engine, the SPA 62a rated at 234 kilowatts (285 horsepower). In this redesigned form, the MVT underwent testing at Guidonia Montecelio, where it achieved a speed of 275 kilometers per hour (171 miles per hour).[2]

Marchetti joined the SIAI firm in 1922 as its chief designer, and at that time the MVT was renamed the SIAI S.50. Although the S.50 did not meet the specifications the Regia Aeronautica (Italian Royal Air Force) had established for entrants in the 1923 single-seat fighter contest—which specified that entrants be powered by the 224-kilowatt (300-horsepower) Hispano-Suiza HS 42 eight-cylinder water-cooled engine[3]—SIAI entered it anyway. It met a favorable enough reception for the Regia Aeronautica to acquire three aircraft for evaluation and make plans to order 12 aircraft, although in the end the 12 were never ordered or constructed.[2]

Experience with S.50 in the 1923 contest led Alessandro Marchetti to design and construct a derivative of the S.50, the SIAI S.52 fighter.[3]

Variants

One of the Regia Aeronautica's three S.50s was modified into a twin-float floatplane.[2]

Operators

 Kingdom of Italy

Specifications (MVT with SPA 6a engine[4])

Data from Green, William, and Gordon Swanborough The Complete Book of Fighters: An Illustrated Encyclopedia of Every Fighter Aircraft Built and Flown, New York: SMITHMARK Publishers, 1994, ISBN 0-8317-3939-8

General characteristics

Performance

Armament

Notes:

See also

Related development


Notes

  1. ↑ Green and Swanborough, p. 527.
  2. 1 2 3 4 5 Green and Swanborough, p. 362.
  3. 1 2 Green and Swanborough, pp. 526-527.
  4. ↑ Green and Swanborough claim that the specifications are for the SPA 62a-powered version, but this appears to be in error; the maximum speed they cite matches the speed they report for the SPA 6a-powered version, not the speed they report for the SPA 62a-powered version.

References

Wikimedia Commons has media related to SIAI S.50.
This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.