Mercury beating heart

The mercury beating heart is an electrochemical redox reaction between the elements mercury, iron and chromium. The reaction causes a blob of mercury in water to oscillate.

The observeable reaction demonstrates an effect of a non-homogeneous electrical double layer.[1] It is often used as a classroom demonstration.

The experiment

Mercury beating heart is similar to gallium beating heart (shown on video).

In the experiment a droplet of mercury is placed in a watch glass, immersed in an electrolyte such as sulfuric acid which contains an oxidizing agent such as hydrogen peroxide, potassium permanganate, or potassium dichromate. The tip of an iron nail is positioned almost touching the mercury. If the position of the nail tip is just right, the mercury blob begins to oscillate, changing shape.

The explanation

In one variation the mechanism is thought to be the following: The dichromate oxidizes the mercury, forming a layer of mercury oxide. In the process the dichromate is reduced to the chromium (III) ion. The oxidized layer on the mercury reduces the surface tension of the blob and the blob flattens out coming in contact with the iron nail. Then the mercury sulfate oxidizes the iron to the iron (II) ion, and in the process is reduced back to metallic mercury. Once there is no oxide coating left on the mercury blob, the surface tension increases and the blob rounds up and loses contact with the nail, to start the process over again.

The net reaction is that the dichromate oxidizes the iron. This favorable reaction drives the mercury oxidations/reductions and the oscillations in shape. When the dichromate is all reduced, the reaction stops.

There may be other mechanisms involved, however. Lin et al. appear to report that the oscillations occur without the presence of the oxidizing agent, though the mercury does not appear to get an oxidizing layer on it and the oscillations are much weaker.

An electrical double layer forms between the surface of the mercury droplet and the electrolyte solution. At rest this layer is uniform. When the iron tip is introduced a redox reaction starts in which iron is oxidized to the ferric ion. At the same time the oxidizing reagent is spent for instance when hydrogen peroxide together with hydronium ions is reduced to water. Because the oxidation only takes place in the vicinity of the tip and the reduction process covers the whole droplet surface the surface tension is no longer homogeneous resulting in oscillations.[2]

Although this reaction is mediated by changes in surface tension, it is very similar in mechanism to other chemical oscillators such as the Belousov–Zhabotinsky reaction, which has several intermediate redox reactions driven by the oxidation of malate by bromine.

The mercury beating heart was first observed by Carl Adolf Paalzow in 1858. Jöns Jakob Berzelius is reported to have used electrodes.

See also

References

  1. ↑ Mercury Beating Heart: Modifications to the Classical Demonstration Najdoski, Metodija; Mirceski, Valentin; Petruševski, Vladimir M.; Demiri, Sani. J. Chem. Educ. 2007, 84, 1292. Abstract
  2. ↑ Shu-Wai Lin, Joel Keizer, Peter A. Rock and Herbert Stenschke (1974). "On the Mechanism of Oscillations in the ``Beating Mercury Heart". Proceedings of the National Academy of Sciences of the United States of America 71 (11): 4477–4481. Bibcode:1974PNAS...71.4477L. doi:10.1073/pnas.71.11.4477. JSTOR 64221. PMC 433909. PMID 16592197.

External links

This article is issued from Wikipedia - version of the Monday, February 22, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.