Multiple-criteria decision analysis

"MCDM" redirects here. For the use in cosmology, see meta-cold dark matter.
Plot of two criteria when maximizing return and minimizing risk in financial portfolios (Pareto-optimal points in red)

Multiple-criteria decision-making (MCDM) or multiple-criteria decision analysis (MCDA) is a sub-discipline of operations research that explicitly considers multiple criteria in decision-making environments. Whether in our daily lives or in professional settings, there are typically multiple (conflicting) criteria that need to be evaluated in making decisions. Cost or price is usually one of the main criteria. Some measure of quality is typically another criterion that is in conflict with the cost. In purchasing a car, cost, comfort, safety, and fuel economy may be some of the main criteria we consider. It is unusual that the cheapest car is the most comfortable and the safest one. In portfolio management, we are interested in getting high returns but at the same time reducing our risks. Again, the stocks that have the potential of bringing high returns typically also carry high risks of losing money. In a service industry, customer satisfaction and the cost of providing service are two conflicting criteria that would be useful to consider.

In our daily lives, we usually weigh multiple criteria implicitly and we may be comfortable with the consequences of such decisions that are made based on only intuition. On the other hand, when stakes are high, it is important to properly structure the problem and explicitly evaluate multiple criteria. In making the decision of whether to build a nuclear power plant or not, and where to build it, there are not only very complex issues involving multiple criteria, but there are also multiple parties who are deeply affected from the consequences.

Structuring complex problems well and considering multiple criteria explicitly leads to more informed and better decisions. There have been important advances in this field since the start of the modern multiple-criteria decision-making discipline in the early 1960s. A variety of approaches and methods, many implemented by specialized decision-making software,[1][2] have been developed for their application in an array of disciplines, ranging from politics and business to the environment and energy.[3]

Foundations, concepts, definitions

MCDM or MCDA are well-known acronyms for multiple-criteria decision-making and multiple-criteria decision analysis. Stanley Zionts wrote an article in 1979 titled: "MCDM – If not a Roman Numeral, then What?"

MCDM is concerned with structuring and solving decision and planning problems involving multiple criteria. The purpose is to support decision-makers facing such problems. Typically, there does not exist a unique optimal solution for such problems and it is necessary to use decision-maker’s preferences to differentiate between solutions.

"Solving" can be interpreted in different ways. It could correspond to choosing the "best" alternative from a set of available alternatives (where "best" can be interpreted as "the most preferred alternative" of a decision-maker). Another interpretation of "solving" could be choosing a small set of good alternatives, or grouping alternatives into different preference sets. An extreme interpretation could be to find all "efficient" or "nondominated" alternatives (which we will define shortly).

The difficulty of the problem originates from the presence of more than one criterion. There is no longer a unique optimal solution to an MCDM problem that can be obtained without incorporating preference information. The concept of an optimal solution is often replaced by the set of nondominated solutions. A nondominated solution has the property that it is not possible to move away from it to any other solution without sacrificing in at least one criterion. Therefore, it makes sense for the decision-maker to choose a solution from the nondominated set. Otherwise, she/he could do better in terms of some or all of the criteria, and not do worse in any of them. Generally, however, the set of nondominated solutions is too large to be presented to the decision-maker for his final choice. Hence we need tools that help the decision-maker focus on his preferred solutions (or alternatives). Normally one has to "tradeoff" certain criteria for others.

MCDM has been an active area of research since the 1970s. There are several MCDM-related organizations including the International Society on Multi-criteria Decision Making, Euro Working Group on MCDA,[4] and INFORMS Section on MCDM.[5] For a history see: Köksalan, Wallenius and Zionts (2011).[6] MCDM draws upon knowledge in many fields including:

A typology

There are different classifications of MCDM problems and methods. A major distinction between MCDM problems is based on whether the solutions are explicitly or implicitly defined.

Whether it is an evaluation problem or a design problem, preference information of DMs is required in order to differentiate between solutions. The solution methods for MCDM problems are commonly classified based on the timing of preference information obtained from the DM.

There are methods that require the DM’s preference information at the start of the process, transforming the problem into essentially a single criterion problem. These methods are said to operate by "prior articulation of preferences." Methods based on estimating a value function or using the concept of "outranking relations," analytical hierarchy process, and some decision rule-based methods try to solve multiple criteria evaluation problems utilizing prior articulation of preferences. Similarly, there are methods developed to solve multiple-criteria design problems using prior articulation of preferences by constructing a value function. Perhaps the most well-known of these methods is goal programming. Once the value function is constructed, the resulting single objective mathematical program is solved to obtain a preferred solution.

Some methods require preference information from the DM throughout the solution process. These are referred to as interactive methods or methods that require "progressive articulation of preferences." These methods have been well-developed for both the multiple criteria evaluation (see for example Geoffrion, Dyer and Feinberg, 1972,[8] and Köksalan and Sagala, 1995[9] ) and design problems (see Steuer, 1986[10]).

Multiple-criteria design problems typically require the solution of a series of mathematical programming models in order to reveal implicitly defined solutions. For these problems, a representation or approximation of "efficient solutions" may also be of interest. This category is referred to as "posterior articulation of preferences," implying that the DM’s involvement starts posterior to the explicit revelation of "interesting" solutions (see for example Karasakal and Köksalan, 2009[11]).

When the mathematical programming models contain integer variables, the design problems become harder to solve. Multiobjective Combinatorial Optimization (MOCO) constitutes a special category of such problems posing substantial computational difficulty (see Ehrgott and Gandibleux,[12] 2002, for a review).

Representations and definitions

The MCDM problem can be represented in the criterion space or the decision space. Alternatively, if different criteria are combined by a weighted linear function, it is also possible to represent the problem in the weight space. Below are the demonstrations of the criterion and weight spaces as well as some formal definitions.

Criterion space representation

Let us assume that we evaluate solutions in a specific problem situation using several criteria. Let us further assume that more is better in each criterion. Then, among all possible solutions, we are ideally interested in those solutions that perform well in all considered criteria. However, it is unlikely to have a single solution that performs well in all considered criteria. Typically, some solutions perform well in some criteria and some perform well in others. Finding a way of trading off between criteria is one of the main endeavors in the MCDM literature.

Mathematically, the MCDM problem corresponding to the above arguments can be represented as

"max" q
subject to
q ∈ Q

where q is the vector of k criterion functions (objective functions) and Q is the feasible set, Q ⊆ Rk.

If Q is defined explicitly (by a set of alternatives), the resulting problem is called a Multiple Criteria Evaluation problem.

If Q is defined implicitly (by a set of constraints), the resulting problem is called a Multiple Criteria Design problem.

The quotation marks are used to indicate that the maximization of a vector is not a well-defined mathematical operation. This corresponds to the argument that we will have to find a way to resolve the trade-off between criteria (typically based on the preferences of a decision maker) when a solution that performs well in all criteria does not exist.

Decision space representation

The decision space corresponds to the set of possible decisions that are available to us. The criteria values will be consequences of the decisions we make. Hence, we can define a corresponding problem in the decision space. For example, in designing a product, we decide on the design parameters (decision variables) each of which have an impact on the performance measures (criteria) with which we evaluate our product.

Mathematically, a multiple-criteria design problem can be represented in the decision space as follows:

"max" q = f(x) = (f1(x),...,fk(x))
subject to
q ∈ Q = {f(x) : x ∈ X, X ⊆ Rn},

where X is the feasible set and x is the decision variable vector of size n.

A well-developed special case is obtained when X is a polyhedron defined by linear inequalities and equalities. If all the objective functions are linear in terms of the decision variables, this variation leads to multiple objective linear programming (MOLP), an important subclass of MCDM problems.

There are several definitions that are central in MCDM. Two closely related definitions are those of nondominance (defined based on the criterion space representation) and efficiency (defined based on the decision variable representation).

Definition 1. q* ∈ Q is nondominated if there does not exist another q ∈ Q such that q ≥ q* and q ≠ q*.

Roughly speaking, a solution is nondominated so long as it is not inferior to any other available solution in all the considered criteria.

Definition 2. x* ∈ X is efficient if there does not exist another x ∈ X such that f(x) ≥ f(x*) and f(x) ≠ f(x*).

If an MCDM problem represents a decision situation well, then the most preferred solution of a DM has to be an efficient solution in the decision space, and its image is a nondominated point in the criterion space. Following definitions are also important.

Definition 3. q* ∈ Q is weakly nondominated if there does not exist another q ∈ Q such that q > q*.

Definition 4. x* ∈ X is weakly efficient if there does not exist another x ∈ X such that f(x) > f(x*).

Weakly nondominated points include all nondominated points and some special dominated points. The importance of these special dominated points comes from the fact that they commonly appear in practice and special care is necessary to distinguish them from nondominated points. If, for example, we maximize a single objective, we may end up with a weakly nondominated point that is dominated. The dominated points of the weakly nondominated set are located either on vertical or horizontal planes (hyperplanes) in the criterion space.

Ideal point: (in criterion space) represents the best (the maximum for maximization problems and the minimum for minimization problems) of each objective function, and typically corresponds to an infeasible solution.

Nadir point: (in criterion space) represents the worst (the minimum for maximization problems and the maximum for minimization problems) of each objective function among the points in the nondominated set, and is typically a dominated point.

The ideal point and the nadir point are useful to the DM to get the "feel" of the range of solutions (although it is not straightforward to find the nadir point for design problems having more than two criteria).

Illustrations of the decision and criterion spaces

The following two-variable MOLP problem in the decision variable space will help demonstrate some of the key concepts graphically.

Figure 1. Demonstration of the decision space
Max f1(x) = -x1 + 2x2
Max f2(x) = 2x1 – x2
subject to
x1 ≤ 4
x2 ≤ 4
x1 + x2 ≤ 7
-x1 + x2 ≤ 3
x1 – x2 ≤ 3
x1, x2 ≥ 0


In Figure 1, the extreme points "e" and "b" maximize the first and second objectives, respectively. The red boundary between those two extreme points represents the efficient set. It can be seen from the figure that, for any feasible solution outside the efficient set, it is possible to improve both objectives by some points on the efficient set. Conversely, for any point on the efficient set, it is not possible to improve both objectives by moving to any other feasible solution. At these solutions, one has to sacrifice from one of the objectives in order to improve the other objective.

Due to its simplicity, the above problem can be represented in criterion space by replacing the x's with the f 's as follows:

Figure 2. Demonstration of the solutions in the criterion space
Max f1
Max f2
subject to
f1 + 2f2 ≤ 12
2f1 + f2 ≤ 12
f1 + f2 ≤ 7
f1 – f2 ≤ 9
-f1 + f2 ≤ 9
f1 + 2f2 ≥ 0
2f1 + f2 ≥ 0

We present the criterion space graphically in Figure 2. It is easier to detect the nondominated points (corresponding to efficient solutions in the decision space) in the criterion space. The north-east region of the feasible space constitutes the set of nondominated points (for maximization problems).

Generating nondominated solutions

There are several ways to generate nondominated solutions. We will discuss two of these. The first approach can generate a special class of nondominated solutions whereas the second approach can generate any nondominated solution.

If we combine the multiple criteria into a single criterion by multiplying each criterion with a positive weight and summing up the weighted criteria, then the solution to the resulting single criterion problem is a special efficient solution. These special efficient solutions appear at corner points of the set of available solutions. Efficient solutions that are not at corner points have special characteristics and this method is not capable of finding such points. Mathematically, we can represent this situation as

max wT.q = wT.f(x), w> 0
subject to
x ∈ X

By varying the weights, weighted sums can be used for generating efficient extreme point solutions for design problems, and supported (convex nondominated) points for evaluation problems.

Figure 3. Projecting points onto the nondominated set with an Achievement Scalarizing Function

Achievement scalarizing functions also combine multiple criteria into a single criterion by weighting them in a very special way. They create rectangular contours going away from a reference point towards the available efficient solutions. This special structure empower achievement scalarizing functions to reach any efficient solution. This is a powerful property that makes these functions very useful for MCDM problems.

Mathematically, we can represent the corresponding problem as

Min s(g, q, w, ρ) = Min {maxi [(gi – qi)/wi ] + ρ ∑i (gi- qi)},
subject to
q ∈ Q

The achievement scalarizing function can be used to project any point (feasible or infeasible) on the efficient frontier. Any point (supported or not) can be reached. The second term in the objective function is required to avoid generating inefficient solutions. Figure 3 demonstrates how a feasible point, g1, and an infeasible point, g2, are projected onto the nondominated points, q1 and q2, respectively, along the direction w using an achievement scalarizing function. The dashed and solid contours correspond to the objective function contours with and without the second term of the objective function, respectively.

Solving MCDM problems

Different schools of thought have developed for solving MCDM problems (both of the design and evaluation type). For a bibliometric study showing their development over time, see Bragge, Korhonen, H. Wallenius and J. Wallenius [2010].[15]

Multiple objective mathematical programming school

(1) Vector maximization: The purpose of vector maximization is to approximate the nondominated set; originally developed for Multiple Objective Linear Programming problems (Evans and Steuer, 1973;[16] Yu and Zeleny, 1975[17]).

(2) Interactive programming: Phases of computation alternate with phases of decision-making (Benayoun et al., 1971;[18] Geoffrion, Dyer and Feinberg, 1972;[19] Zionts and Wallenius, 1976;[20] Korhonen and Wallenius, 1988[21]). No explicit knowledge of the DM’s value function is assumed.

Goal programming school

The purpose is to set apriori target values for goals, and to minimize weighted deviations from these goals. Both importance weights as well as lexicographic pre-emptive weights have been used (Charnes and Cooper, 1961[22]).

Fuzzy-set theorists

Fuzzy sets were introduced by Zadeh (1965)[23] as an extension of the classical notion of sets. This idea is used in many MCDM algorithms to model and solve fuzzy problems.

Multi-attribute utility theorists

Multi-attribute utility or value functions are elicited and used to identify the most preferred alternative or to rank order the alternatives. Elaborate interview techniques, which exist for eliciting linear additive utility functions and multiplicative nonlinear utility functions, are used (Keeney and Raiffa, 1976[24]).

French school

The French school focuses on decision aiding, in particular the ELECTRE family of outranking methods that originated in France during the mid-1960s. The method was first proposed by Bernard Roy (Roy, 1968[25]).

Evolutionary multiobjective optimization school (EMO)

EMO algorithms start with an initial population, and update it by using processes designed to mimic natural survival-of-the-fittest principles and genetic variation operators to improve the average population from one generation to the next. The goal is to converge to a population of solutions which represent the nondominated set (Schaffer, 1984;[26] Srinivas and Deb, 1994[27]). More recently, there are efforts to incorporate preference information into the solution process of EMO algorithms (see Deb and Köksalan, 2010[28]).

Analytic hierarchy process (AHP)

The AHP first decomposes the decision problem into a hierarchy of subproblems. Then the decision-maker evaluates the relative importance of its various elements by pairwise comparisons. The AHP converts these evaluations to numerical values (weights or priorities), which are used to calculate a score for each alternative (Saaty, 1980[29]). A consistency index measures the extent to which the decision-maker has been consistent in her responses.

MCDM methods

The following MCDM methods are available, many of which are implemented by specialized decision-making software:[1][2]

See also

References

  1. 1 2 Weistroffer, H. R., Smith, C. H., and Narula, S. C., "Multiple criteria decision support software", Ch 24 in: Figueira, J., Greco, S., and Ehrgott, M., eds, Multiple Criteria Decision Analysis: State of the Art Surveys Series, Springer: New York, 2005.
  2. 1 2 McGinley, P. (2012), "Decision analysis software survey", OR/MS Today 39.
  3. ↑ "Multicriteria analysis for the selection of the most appropriate energy crops: the case of Cyprus". Angeliki Kylili, Elias Christoforou, Paris A. Fokaides, Polycarpos Polycarpou. International Journal of Sustainable Energy. Retrieved 3 November 2014.
  4. ↑ http://www.cs.put.poznan.pl/ewgmcda/
  5. ↑ http://www.informs.org/Community/MCDM/
  6. ↑ Köksalan, M., Wallenius, J., and Zionts, S. (2011). Multiple Criteria Decision Making: From Early History to the 21st Century. Singapore: World Scientific.
  7. ↑ Triantaphyllou, E. (2000). Multi-Criteria Decision Making: A Comparative Study. Dordrecht, The Netherlands: Kluwer Academic Publishers (now Springer). p. 320. ISBN 0-7923-6607-7.
  8. ↑ An Interactive Approach for Multi-Criterion Optimization, with an Application to the Operation of an Academic Department, A. M. Geoffrion, J. S. Dyer and A. Feinberg, Management Science, Vol. 19, No. 4, Application Series, Part 1 (Dec., 1972), pp. 357-368 Published by: INFORMS
  9. ↑ Köksalan, M.M. and Sagala, P.N.S., M. M.; Sagala, P. N. S. (1995). "Interactive Approaches for Discrete Alternative Multiple Criteria Decision Making with Monotone Utility Functions". Management Science 41 (7): 1158–1171. doi:10.1287/mnsc.41.7.1158.
  10. ↑ Steuer, R.E. (1986). Multiple Criteria Optimization: Theory, Computation and Application. New York: John Wiley.
  11. ↑ Karasakal, E. K. and Köksalan, M., E.; Koksalan, M. (2009). "Generating a Representative Subset of the Efficient Frontier in Multiple Criteria Decision Making". Operations Research 57: 187–199. doi:10.1287/opre.1080.0581.
  12. ↑ Ehrgott, M. and Gandibleux, X. (2002). "Multiobjective Combinatorial Optimization". Multiple Criteria Optimization, State of the Art Annotated Bibliographic Surveys: 369–444.
  13. ↑ Gass, S.; Saaty, T. (1955). "Parametric Objective Function Part II". Operations Research 3: 316–319. doi:10.1287/opre.2.3.316.
  14. ↑ Wierzbicki, A. (1980). "The Use of Reference Objectives in Multiobjective Optimization". Lecture Notes in Economics and Mathematical Systems. Springer, Berlin 177: 468–486. doi:10.1007/978-3-642-48782-8_32.
  15. ↑ Bragge, J.; Korhonen, P.; Wallenius, H.; Wallenius, J. (2010). "Bibliometric Analysis of Multiple Criteria Decision Making/Multiattribute Utility Theory". IXX International MCDM Conference Proceedings, (Eds.) M. Ehrgott, B. Naujoks, T. Stewart, and J. Wallenius. Springer, Berlin 634: 259–268. doi:10.1007/978-3-642-04045-0_22.
  16. ↑ Evans, J.; Steuer, R. (1973). "A Revised Simplex Method for Linear Multiple Objective Programs". Mathematical Programming 5: 54–72. doi:10.1007/BF01580111.
  17. ↑ Yu, P.L.; Zeleny, M. (1975). "The Set of All Non-Dominated Solutions in Linear Cases and a Multicriteria Simplex Method". Journal of Mathematical Analysis and Applications 49 (2): 430–468. doi:10.1016/0022-247X(75)90189-4.
  18. ↑ Benayoun, R.; deMontgolfier, J.; Tergny, J.; Larichev, O. (1971). "Linear Programming with Multiple Objective Functions: Step-method (STEM)". Mathematical Programming 1: 366–375. doi:10.1007/bf01584098.
  19. ↑ Geoffrion, A.; Dyer, J.; Feinberg, A. (1972). "An Interactive Approach for Multicriterion Optimization with an Application to the Operation of an Academic Department". Management Science 19 (4–Part–1): 357–368. doi:10.1287/mnsc.19.4.357.
  20. ↑ Zionts, S.; Wallenius, J. (1976). "An Interactive Programming Method for Solving the Multiple Criteria Problem". Management Science 22 (6): 652–663. doi:10.1287/mnsc.22.6.652.
  21. ↑ Korhonen, P.; Wallenius, J. (1988). "A Pareto Race". Naval Research Logistics 35 (6): 615–623. doi:10.1002/1520-6750(198812)35:6<615::AID-NAV3220350608>3.0.CO;2-K.
  22. ↑ Charnes, A. and Cooper, W.W. (1961). Management Models and Industrial Applications of Linear Programming. New York: Wiley.
  23. ↑ Zadeh, L. (1965). "Fuzzy Sets". Information and Control 8 (3): 338–353. doi:10.1016/S0019-9958(65)90241-X.
  24. ↑ Keeney, R. and Raiffa, H. (1976). Decisions with Multiple Objectives: Preferences and Value Tradeoffs. New York: Wiley.
  25. ↑ Roy, B. (1968). "La méthode ELECTRE". Revue d'Informatique et de Recherche Opérationelle (RIRO) 8: 57–75.
  26. ↑ Shaffer, J.D. (1984). Some Experiments in Machine Learning Using Vector Evaluated Genetic Algorithms, PhD thesis. Nashville: Vanderbilt University.
  27. ↑ Srinivas, N.; Deb, K. (1994). "Multiobjective Optimization Using Nondominated Sorting in Genetic Algorithms". Evolutionary Computation 2 (3): 221–248. doi:10.1162/evco.1994.2.3.221.
  28. ↑ Deb, K.; Köksalan, M. (2010). "Guest Editorial Special Issue on Preference-Based Multiobjective Evolutionary Algorithms". IEEE Transactions on Evolutionary Computation 14 (5): 669–670. doi:10.1109/TEVC.2010.2070371.
  29. ↑ Saaty, T.L. (1980). The Analytic Hierarchy Process: Planning, Priority Setting, Resource Allocation. New York: McGraw-Hill,.
  30. ↑ Rezaei, J. (2015) "Best-Worst Multi-Criteria Decision-Making Method", Omega, 53, 49-57.
  31. ↑ Rezaei, J. (2015) "Best-worst multi-criteria decision-making method: Some properties and a linear model", Omega.
  32. ↑ Wojciech Sałabun (2014) "The Characteristic Objects Method: A New Distance-based Approach to Multicriteria Decision-making Problems", Journal of Multi-Criteria Decision Analysis, article first published online: 4 JUL 2014.
  33. ↑ Opricovic Serafim, Tzeng Gwo-Hshiung (2007) "Extended VIKOR Method in Comparison with Outranking Methods". European Journal of Operational Research, Vol. 178, No 2, pp. 514–529.
  34. ↑ Serafim, Opricovic (2011). "Fuzzy VIKOR with an application to water resources planning". Expert Systems with Applications 38: 12983–12990.

Further reading

This article is issued from Wikipedia - version of the Sunday, March 27, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.