Netgear WNR3500L

Netgear WNR3500L router

The WNR3500L (also known as the WNR3500U) is an 802.11 b/g/n Wi-Fi router created by Netgear. It was officially launched in the autumn of 2009. The WNR3500L runs open-source Linux firmware and supports the installation of third party packages such as DD-WRT and Tomato.

Hardware

Printed circuit board (PCB)

Version 1:^[1]

Broadcom BCM4718 453 MHz SoC
8 MB Flash memory
64 MB RAM
32 kB instruction cache
32 kB data cache
Three internal antennas
802.11 b/g/n wireless support
One 10/100/1000 Mbit/s WAN port
Four 10/100/1000 Mbit/s switched LAN ports
Integrated USB 2.0 EHCI host port
Compatible with Windows 7

Version 2:

Broadcom BCM47186 500 MHz SoC
128 MB flash memory
128 MB RAM
32 kB instruction cache
32 kB data cache
Two internal antennas
802.11 b/g/n wireless support
One 10/100/1000 Mbit/s WAN port
Four 10/100/1000 Mbit/s switched LAN ports
Integrated USB 2.0 EHCI host port
Compatible with Windows 7

Features

Version 1:

Supports installation of Tomato firmware, DD-WRT and a custom version of OpenWrt^[2]
Supports Wi-Fi Protected Setup (WPS)
Automatically detects ISP type, exposed host (DMZ), MAC address authentication, URL content filtering, logs and email alerts of internet activity
Static & dynamic routing with TCP/IP, VPN pass-through (IPsec, L2TP), NAT, PPTP, PPPoE, DHCP (client & server)
Supports IPv6, including automatic 6to4 tunnel (since firmware 1.2.2.30)

Version 2:

Supports installation of Tomato firmware (Shibby and Toastman varieties) and DD-WRT^[3]

References

↑ "Netgear WNR3500L Open Source Wireless N (Draft) Router Open Source Guide & Resources". Retrieved 10 May 2010.
↑ "DD-WRT Downloads". MyOpenRouter.com. Retrieved 2016-04-07.
↑ "3500Lv2 Downloads". MyOpenRouter.com. Retrieved 2016-04-07.

External links

Firmware downloads

This article is issued from Wikipedia - version of the Friday, April 08, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.