Nissan VK engine

Nissan VK
Overview
Manufacturer Nissan Motor Co., Ltd.
Production 2002–
Combustion chamber
Configuration 90° V8
Displacement 4.5L
5.0L
5.6L
Valvetrain DOHC
Combustion
Fuel system Fuel injection
Chronology
Predecessor Nissan VH

The VK engine (formerly known as the ZH) is a V8 piston engine from Nissan. It is an aluminum DOHC 4-valve design.

The VK56 engine was originally based on Nissan's VQ V6 rather than the VH V8 used in previous Q45/Cima models. Changes include: a variable polymer intake manifold, newly designed heads, and a larger drive by wire throttle chamber. The intake manifold directs air through different paths at different engine speeds to optimise low-end torque or high-end horsepower.

VK45DE

VK45DE

The 4.5 L (4494 cc) VK45DE was introduced in 2002 and is built in Yokohama, Japan. Bore is 93 mm (3.7 in) and stroke is 82.7 mm (3.26 in). Output is 340 hp (254 kW) at 6400 rpm with 333 lb·ft (451 Nm) of torque at 4000 rpm. Redline is at 6600 rpm. It has an aluminum engine block and aluminum DOHC cylinder heads. It uses SFI, has 4 valves per cylinder with VVT and features forged steel connecting rods, 4 one-piece cast camshafts, and an unusual variable-flow induction system optimizes airflow for low- and high-speed operation and low-friction molybdenum-coated pistons and microfinished crankshaft.

Motorsport

A flat-plane crankshaft version of the VK45DE was used by Nismo for Super GT races with the Nissan GT-R instead of using the GT-R's VR38DETT twin-turbo V6 engine.[1] The VK45DE was previously used in Nissan's 350Z Super GT car in 2007, replacing the previous VQ30DETT used in that car. In race trim, the Super GT VK45DE produces 500 PS (490 hp) and 52 kg·m (510 N·m; 380 lbf·ft) of torque.[2] The engine idles at around 3500 RPM and is restricted to the above specified power output. Without such restrictions, the engine is reputedly capable of producing nearly 800 PS (790 hp).[3] Nismo reasons that by using the engine, they eliminate turbo-lag, save weight and generally prefer the torque curve of the atmospheric V8.

This engine is used in the following vehicles:

VK45DD

The VK45DD is a 4.5 L (4494 cc) V8 engine that is very similar to the VK45DE but adds a direct injection fuel system. This was Nissans first V8 with direct injection (NEO-Di). It officially produces 280 PS (206 kW; 276 hp) @6000 rpm and 451 N·m (333 lbf·ft) @3600 rpm, but it has unofficially over 300 PS (221 kW; 296 hp). It has a compression ratio of 11.0:1, and a bore of 93 mm (3.7 in) and stroke of 82.7 mm (3.26 in).

It was used in the following:

VK50VE

Nissan VK50VE Engine.

The VK50VE is a 5.0 L (5026 cc) V8 engine with 390 hp @6500 rpm and 500 N·m (370 lb·ft) @4400 rpm and redline is set at 6800 rpm. Bore x stroke (mm) are 95.5 x 87.7 and compression ratio is 10.9:1. The valvetrain is a dual overhead cam (DOHC) design with a continuously variable valve timing control system (CVTCS). The engine also features Nissan's VVEL valve timing technology.[4]

Applications:

VK56DE

Nissan VK56DE engine.

The VK56DE is a 5.6 L (5552 cc) version built in Decherd, Tennessee. Bore is 98 mm (3.9 in) and stroke is 92 mm (3.6 in). Output is 317 hp - 320 hp (227 kW) at 4900 rpm with 385 to 393 lb·ft (522-533 Nm) of torque at 3600 rpm. It has aluminum-alloy block and heads and low-friction molybdenum-coated pistons. The valvetrain is a dual overhead cam (DOHC) design with a continuously variable valve timing control system (CVTCS) on the intake valves. It also has 4 valves per cylinder with micro-finished camshafts and ductile iron cylinder liners for increased durability.

Motorsport

Nismo also uses the VK56DE for FIA GT1 racing. In race trim, it produces 600 horsepower and 479 pound-feet of torque.[5]

The Nissan Motorsport VK56DE was launched in Australia for the V8 Supercars Championship in 2013 by Kelly Racing in Melbourne. The engine has been reduced in capacity to 4,990cc to fit the V8 Supercars regulations. It has a bore and stroke of 102.69mm x 75.31mm. It will be fitted to a Nissan Altima version of the V8 Supercars "Car of the Future" specification that will compete from 2013 onwards.[6]

Applications:

Notes:

VK56VD

Nissan/Infiniti VK56VD Engine.

The VK56VD is a 5.6 L (5552 cc) 32-valve, DOHC, Direct Injection Gasoline (DIG) aluminum-alloy V8 and features Nissan's advanced VVEL (Variable Valve Event & Lift System). The direct injection system provides better wide-open throttle performance and improved fuel economy and emissions performance by reducing engine knock, improving combustion stability and controlling injection more precisely. The engine is built at Nissan's Yokohama Engine facility.

Applications:

References

  1. "Autocar article about the Super GT Nissan GT-R".
  2. "NISMO Japan's Super GT GT-R spec sheet in Japanese".
  3. "YouTube video of NISMO engineer interview regarding the Super GT Nissan GT-R".
  4. "Iconicweb FX Specs" (PDF).
  5. "Nissan GT1 GT-R news - GT-R goes GT1 - 20090 - BBC Top Gear". Topgear.com. 2009-04-08. Retrieved 2012-01-27.
  6. "Nissan Unveils 2013 V8 Supercar Engine". v8supercars.com.au. 2012-09-04. Retrieved 2012-10-28.

See also

This article is issued from Wikipedia - version of the Tuesday, March 15, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.