Nitinol 60

NiTiNOL 60, or 60 NiTiNOL, is a Nickel Titanium alloy (nominally Ni-40wt% Ti) discovered in the late 1950s by the U. S. Naval Ordnance Laboratory (hence the "NOL" portion of the name NiTiNOL).[1] Depending upon the heat treat history, 60 NiTiNOL has the ability to exhibit either superelastic properties in the hardened state or shape memory characteristics in the softened state.[2]

Producing the material in any meaningful quantities, however, proved quite difficult by conventional methods and the material was largely forgotten.

The composition and processing parameters have recently been revived by Summit Materials, LLC under the trademarked name SM-100. SM-100 maintains 60 NiTiNOL's combination of superb corrosion resistance [NASA terms it "Corrosion Proof"[3]] and equally impressive wear and erosion properties.[4]

In bearing lifing tests conducted by NASA, SM-100 has been shown to have over twice the life of 440C stainless steel and over ten times the life of conventional titanium alloys with a significantly lower coefficient of friction.[5] The superelastic nature of the material gives it the ability to withstand compression loading of well over 350 ksi (2,400 MPa) with no permanent yielding.

The main applications for SM-100 thus far appears to be bearings and high-end knives.

The following table compares 60 NiTiNOL against commonly used bearing materials.[3]

SM-100 440C M-50
Density (g/cm3) 6.7 7.8 8.0
Hardness 58-64 Rc 58-62 Rc 60-65 Rc
Corrosion Resistance Excellent Marginal Poor
Magnetic Non Mag. Mag.
Modell Number 38 14 16

References

  1. ↑ 60 NITINOL Alloys (Report). White Oak, MD: U.S. Naval Ordnance Laboratory.
  2. ↑ US patent 6,422,010, Gerald J. Julien, "Manufacturing of Nitinol parts and forms", issued 2002-July-23
  3. 1 2 DellaCorte, 2010, "Nickel-Titanium Alloys: Corrosion Proof Alloys for Space Bearing, Components and Mechanism Applications", NASA-2010-216334
  4. ↑ "http://www.summitmaterials.com/sm-100/bearing-components/". External link in |title= (help);
  5. ↑ DellaCorte, 2009, "Intermetallic Nickel-Titanium Alloys for Oil-Lubricated Bearing Applications", NASA-2009-215646
This article is issued from Wikipedia - version of the Thursday, February 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.