ttcp

For other uses, see TTCP.
Ttcp
Developer(s) Mike Muuss and Terry Slattery
Development status stalled
Written in C
Operating system Unix
Type Bandwidth management
License BSD license
Website http://ftp.arl.mil/~mike/ttcp.html - Source code
nuttcp
Developer(s) Bill Fink and Rob Scott
Stable release 7.3.3 / May 1, 2015 (2015-05-01)
Development status Active
Written in C
Operating system Cross-platform
License GPLv2
Website http://nuttcp.net/

The program ttcp (Test TCP) is a utility for measuring network throughput, popular on Unix systems. It measures the network throughput between two systems using the TCP or optionally UDP protocols.[1] It was written by Mike Muuss and Terry Slattery at BRL sometime before December 1984,[2] to compare the performance of TCP stacks by the Computer Systems Research Group (CSRG) of the University of California, Berkeley and Bolt, Beranek and Newman (BBN) to help DARPA decide which version to place in 4.3BSD.

Many compatible implementations and derivatives exist including the widely used Iperf.[3]

Testing can be done from any platform to any other platform, for example from a Windows machine to a Linux machine, as long as they both have a ttcp application installed. For normal use, ttcp is installed on two machines – one will be the sender, the other the receiver. The receiver is started first and waits for a connection. Once the two connect, the sending machine sends data to the receiver and displays the overall throughput of the network they traverse. The amount of data sent and other options are configurable through command line parameters. The statistics output covers TCP/UDP payload only (not protocol overhead) and is generally displayed by default in KiB/s (kibiBytes per second) instead of kb/s (kilobits per second), but it can be configured to be displayed in other ways on some implementations. The reported throughput is more accurately calculated on the receive side than the transmit side, since the transmit operation may complete before all bytes actually have been transmitted.

Implementations and derivatives

Originally designed for Unix systems, ttcp has since been ported to and reimplemented on many other systems such as Windows.[4][3][5][6][7]

ttcp

The original Unix implementation developed by Mike Muuss and Terry Slattery, version 1.10 dated 1987-09-02. Uses port 2000 by default unless another one is specified with the -p switch.[3]

nttcp

Developed at Silicon Graphics, the nttcp implementation made several changes that remain in future implementations such as by default using port 5001 instead of 2000, reversing the meaning of the -s switch to sink data by default, and adding the -w window size switch[3]

nuttcp

Developed at Laboratory for Computational Physics and Fluid Dynamics at Naval Research Lab (LCP & FD at NRL). Provides additional information related to the data transfer such as user, system, and wall-clock time, transmitter and receiver CPU utilization, and loss percentage (for UDP transfers).[8]

Iperf

Main article: Iperf

Developed by the Distributed Applications Support Team (DAST) at the National Laboratory for Applied Network Research (NLANR). Widely used and ported implementation including additions such as the option for bidirectional traffic.

ntttcp

Develop by Microsoft, used to profile and measure Windows networking performance. NTttcp is one of the primary tools Microsoft engineering teams leverage to validate network function and utility.

ntttcp-for-linux

Develop by Shihua Xiao at Microsoft, used to profile and measure Linux networking performance. Provided multiple threading to exchange data in test, and potentially can interop with Windows version of ntttcp.

PCATTCP

Native Windows version developed by PCAUSA.[9]

Cisco IOS

Cisco IOS routers include ttcp as a hidden command that can be set up as either the sender or receiver in version 11.2 or higher and feature sets IP Plus (is- images) or Service Provider (p- images).[10]

EnGenius

Many EnGenius branded wireless access points include an Iperf-based implementation accessible as Speed Test under Diagnostics in the web and command line user interfaces.[11]

See also

References

This article is issued from Wikipedia - version of the Monday, February 22, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.