Oscillator start-up timer

An oscillator start-up timer (OST) is a module used by some microcontrollers to keep the device reset until the crystal oscillator is stable. When a crystal oscillator starts up, its frequency is not constant, which causes the clock frequency to be non-constant. This would cause timing errors, leading to many problems. An oscillator start-up timer ensures that the device only operates when the oscillator generates a stable clock frequency.^[1][2] The PIC microcontroller's oscillator start-up timer holds the device's reset for a 1024-oscillator-cycle delay to allow the oscillator to stabilize.^[3]

See also

• Power-on reset
• Brown-out reset
• Watchdog timer
• Low-Voltage Detect

References

1. PIC tutorials - PIC16x8x, retrieved 27 October 2011
2. Maxim - Crystal Considerations with Maxim Real-Time Clocks, retrieved 27 October 2011
3. Microchip - reset, retrieved 27 October 2011