Overlay (programming)

In a general computing sense, overlaying means "the process of transferring a block of program code or other data into internal memory, replacing what is already stored".[1] Overlaying is a programming method that allows programs to be larger than the computer's main memory.[2] An embedded system would normally use overlays because of the limitation of physical memory, which is internal memory for a system-on-chip and the lack of virtual memory facilities.

Usage

Constructing an overlay program involves manually dividing a program into self-contained object code blocks called overlays laid out in a tree structure. Sibling segments, those at the same depth level, share the same memory, called overlay region or destination region. An overlay manager, either part of the operating system or part of the overlay program, loads the required overlay from external memory into its destination region when it is needed. Often linkers provide support for overlays.[3]

Example

The following example shows the control statements that instruct the OS/360 Linkage Editor to link an overlay program, indented to show structure:

 INCLUDE SYSLIB(MOD1)
 INCLUDE SYSLIB(MOD2)
 OVERLAY A
   INCLUDE SYSLIB(MOD3)
     OVERLAY AA
       INCLUDE SYSLIB(MOD4)
       INCLUDE SYSLIB(MOD5)
     OVERLAY AB
        INCLUDE SYSLIB(MOD6)
 OVERLAY B
    INCLUDE SYSLIB(MOD7)

                       +--------------+
                       | Root Segment |
                       | MOD1, MOD2   |
                       +--------------+
                               |
                    +----------+----------+
                    |                     |
             +-------------+       +-------------+
             |  Overlay A  |       |  Overlay B  |
             |  MOD3       |       |  MOD7       |
             +-------------+       +-------------+
                    |
           +--------+--------+
           |                 |
    +-------------+   +-------------+
    | Overlay AA  |   | Overlay AB  |
    | MOD4, MOD5  |   | MOD6        |
    +-------------+   +-------------+

These statements define a tree consisting of the permanently resident segment, called the root, and two overlays A and B which will be loaded following the end of MOD2. Overlay A itself consists of two overlay segments, AA, and AB. At execution time overlays A and B will both utilize the same memory locations; AA and AB will both utilize the same locations following the end of MOD3.

All the segments between the root and a given overlay segment are called a path.

Applications

As of 2015, most business applications are intended to run on platforms with virtual memory. A developer on such a platform can design a program as if the memory constraint does not exist unless the program's working set exceeds the available physical memory. Most importantly, the architect can focus on the problem being solved without the added design difficulty of forcing the processing into steps constrained by the overlay size. Thus, the designer can use higher-level programming languages that do not allow the programmer much control over size (e.g. Java, C++, Smalltalk).

Still, overlays remain useful in embedded systems.[4] Some low-cost processors used in embedded systems do not provide a memory management unit (MMU). In addition many embedded systems are real-time systems and overlays provide more determinate response-time than paging. For example, the Space Shuttle Primary Avionics System Software (PASS) uses programmed overlays.[5]

Even on platforms with virtual memory, software components such as codecs may be decoupled to the point where they can be loaded in and out as needed.

Historical use

In the home computer era overlays were popular because the operating system and many of the computer systems it ran on lacked virtual memory and had very little RAM by current standards — the original IBM PC had between 16K and 64K depending on configuration. Overlays were a popular technique in Commodore BASIC to load graphics screens. In order to detect when an overlay was already loaded, a flag variable could be used.[6]

"Several DOS linkers in the 1980s supported [overlays] in a form nearly identical to that used 25 years earlier on mainframe computers."[4] Binary files containing memory overlays had a de facto standard extension, .OVL. This file type was used among others by WordStar, dBase, and the Enable DOS office automation software package from Enable Software, Inc.. The GFA BASIC compiler was able to produce .OVL files.

References

  1. ↑ "Oxford Dictionaries". November 26, 2015.
  2. ↑ "Loading And Linking Commodore Programs Part 4: Overlaying". This lets you run programs which are, in effect, much larger than the amount of memory in your computer.
  3. ↑ "The GNU Linker documentation: Overlay Description". June 3, 2008.
  4. 1 2 Levine, John R. (2000). Linkers & Loaders. Morgan Kaufmann Publishers. p. 177. ISBN 1-55860-496-0.
  5. ↑ "An Assessment of Space Shuttle Flight Software Development Processes". Retrieved October 29, 2012.
  6. ↑ "Loading And Linking Commodore Programs Part 4: Overlaying".

External links

See also

This article is issued from Wikipedia - version of the Thursday, May 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.