Pelamis Wave Energy Converter

The Pelamis Wave Energy Converter is a technology that uses the motion of ocean surface waves to create electricity. The machine is made up of connected sections which flex and bend as waves pass; it is this motion which is used to generate electricity.

Developed by the now defunct [1] Scottish company Pelamis Wave Power (formerly Ocean Power Delivery), the Pelamis became the s first offshore wave machine to generate electricity into the grid, when it was first connected to the UK grid in 2004.[2] Pelamis Wave Power then went on to build and test five additional Pelamis machines: three first-generation P1 machines, which were tested in a farm off the coast of Portugal in 2009, and two second-generation machines, the Pelamis P2, which started tests off Orkney in 2010.

Operation

The Pelamis machine is an offshore wave energy converter, operating in water depths greater than 50m. The machine consists of a series of semi-submerged cylindrical sections linked by hinged joints. As waves pass along the length of the machine, the sections move relative to one another. The wave-induced motion of the sections is resisted by hydraulic cylinders which pump high pressure oil through hydraulic motors via smoothing hydraulic accumulators. The hydraulic motors drive electrical generators to produce electricity. Electricity from all the joints is fed down a single umbilical cable to a junction on the sea bed. Several devices can be connected and linked to shore through a single seabed cable.

Principle

The Pelamis is an attenuating wave energy converter. The machine responds to the curvature of the waves (their shape) rather than the wave height. As waves can only reach a certain curvature before naturally breaking, this limits the range of motion through which the machine must move but maintains large motion at the joints in small waves.

Projects

P2 Pelamis Testing at EMEC

The P2 Pelamis design was Pelamis Wave Power's second generation Pelamis machine. The Pelamis P2 is 180m long, 4m diameter and approximately 1350 tonnes in weight. Consisting of five tube sections and four flexible joints, the design is longer and fatter than the previous P1 design.

In 2010, Pelamis Wave Power began tests of the first Pelamis P2 machine at the European Marine Energy Centre, Orkney, Scotland. The machine is owned by the German utility company, E.ON, and was the UK's first commercial supply contract in the marine energy sector.[3] In March 2010 Pelamis Wave Power announced a second order for a P2 machine, from ScottishPower Renewables, part of Iberdrola Renovables.[4] This second machine was installed for the first time at EMEC in May 2012.[5] The two utility companies have announced that they will work together to share and collaborate in testing of the P2 Pelamis technology.[6]

Projects Formerly in Development

E.ON and ScottishPower Renewables have announced plans to build larger projects using Pelamis machines in the waters off Orkney's west coast.[7] Both companies won leases in 2010 from The Crown Estate, who own the seabed around the UK, for projects of up to 50MW. The 'Pentland Firth and Orkney Waters Leasing Round' was the world's first commercial scale wave and tidal energy leasing opportunity.[8]

Development History

Prototype Pelamis Machine

The Pelamis Prototype machine at EMEC, Orkney, Scotland, 2007

Pelamis Wave Power tested their first full-scale prototype at the European Marine Energy Centre in Orkney, Scotland between 2004 and 2007. The machine, which was rated at 750 kW, was the world's first offshore wave power machine to generate electricity into the grid system.

The prototype was 120m long and 3.5m in diameter. It consisted of four tube sections linked by three, shorter, power conversion modules[9]

Aguçadoura Wave Farm

Main article: Aguçadoura Wave Farm

In 2008 Pelamis tested three first generation, P1 Pelamis waves at the Aguçadoura Wave Farm. Located off the northwest coast of Portugal near Póvoa de Varzim, the farm had an installed capacity of 2.25MW and was the world's first multiple machine wave power project.[10] The project was part funded by Portuguese utility Enersis,[11] at the time owned by Australian global investment company Babcock & Brown.[12] The farm first generated electricity in July 2008 but was taken offline in November 2008 at the same time as Babcock & Brown encountered financial difficulties.[13]

Etymology

Pelamis platurus is a yellow-bellied sea snake that lives in tropical and subtropical waters. It prefers shallow inshore waters.

Images

See also

References

  1. "Wave power firm Pelamis calls in administrators". 21 November 2014. Retrieved 21 November 2014.
  2. "Update on EMEC activities, resource description, and characterisation of wave-induced velocities in a tidal flow" (PDF). Retrieved 2010-12-03.
  3. "Making Waves". Scottish Government. Retrieved 2011-04-07.
  4. "ScottishPower Renewables Purchase Pelamis Wave Power Device". ScottishPowerRenewables.com. Retrieved 2010-06-16.
  5. "ScottishPower Renewables at EMEC". www.pelamiswave.com. Retrieved 2013-03-15.
  6. "Two Major Energy Players Join Forces on Wave Power". New Energy Focus. Retrieved 2011-04-07.
  7. "ScottishPower Renewables To Develop Major Marine Power Sites In The Pentland Firth". ScottishPower Renewables. Retrieved 2011-04-07.
  8. "'Milestone' for wave energy plans". news.bbc.co.uk. 2010-03-16.
  9. "Development History". Pelamis Wave Power. Retrieved 29 June 2012.
  10. "Wave energy contract goes abroad". BBC Scotland. 2005-05-19. Retrieved 2008-08-06.
  11. "Pelamis Offshore Wave Energy in Portugal". Alternative Energy. 2006-10-08.
  12. "Babcock & Brown acquires Enersis for €490mn". Retrieved 2011-04-07.
  13. "Big boys' greed pulls us all down". The Sydney Morning Herald. 2008-09-27.

External links

This article is issued from Wikipedia - version of the Sunday, March 13, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.