Perveance

Perveance is a notion used in the description of charged particle beams. The value of perveance indicates how significant the space charge effect is on the beam’s motion. The term is used primarily for electron beams, in which motion is often dominated by the space charge.

Origin of the word

The word was probably created from Latin pervenio–to attain.

Definition

For an electron gun, the gun perveance P is determined as a coefficient of proportionality between a space-charge limited current, I, and the gun anode voltage, U_a, in three-half power in the Child- Langmuir law [1]

{I} = {P}\cdot U_a^\frac{3}{2}

The same notion is used for non-relativistic beams propagating through a vacuum chamber. In this case, the beam is assumed to have been accelerated in a stationary electric field so that U_a is the potential difference between the emitter and the vacuum chamber, and the ratio of \frac{I}{U_a^\frac{3}{2}} is referred to as a beam perveance. In equations describing motion of relativistic beams, contribution of the space charge appears as a dimensionless parameter called the generalized perveance K[2][3] defined as

{K} = \frac{{I}}{{I_0}}\cdot\frac{{2}}{{\beta}^3{\gamma}^3}\cdot (1-\gamma^2f_e),

where {I_0}=4\pi\varepsilon_{0}\cdot\frac{m c^3}{e}\approx 17 \mathrm{kA}(for electrons) is the Budker (or Alfven) current; \mathbf{\beta} and \mathbf{\gamma} are the relativistic factors, and f_e is the neutralization factor.

Examples

The 6S4A[4] is an example of a high perveance triode. The triode section of a 6AU8A becomes a high-perveance diode when its control grid is employed as the anode.[5] Each section of a 6AL5 is a high-perveance diode[6] as opposed to a 1J3 which requires over 100V to reach only 2mA.[7]

Perveance does not relate directly to current handling. Another high-perveance diode, the diode section of a 33GY7, shows similar perveance to a 6AL5, but handles 15 times greater current, at almost 13 times maximum peak inverse voltage.[8]

References

  1. Handbook of Accelerator Physics and Engineering, edited by A.W. Chao and M. Tigner, World Scientific, 1999, p. 100
  2. Lawson, J. D., J. Electron. Control 5, 146 (1958).
  3. M. Reiser, Theory and Design of charged particle beams, John Wiley & Sons, Inc., 1994
  4. RCA Receiving Tube Manual - 6S4-A
  5. 1959 General Electric Tube Manual - 6AU8-A
  6. 1954 General Electric Tube Manual - 6AL5
  7. 1957 General Electric Tube Manual - 1J3
  8. 1965 Tung-Sol Tube Manual - 33GY7
This article is issued from Wikipedia - version of the Sunday, July 14, 2013. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.