Photomapping

Photomapping involves the process of drawing a map from a photographic base. "In all likelihood, computer map making, including analogue processing, will have replaced manual map making for well over 90 per cent of all maps".[1]

Principles and Definitions

Photomapping is the process of making a map with "cartographic enhancements"[2] that have been drawn from a photomosaic[3] that is "a composite photographic image of the ground" or more precisely as a controlled photomosaic where "individual photographs are rectified for tilt and brought to a common scale (at least at certain control points)."

Rectification of imagery is generally achieved by "fitting the projected images of each photograph to a set of four control points whose positions have been derived from an existing map or from ground measurements. When these rectified, scaled photographs are positioned on a grid of control points, a good correspondence can be achieved between them through skillful trimming and fitting and the use of the areas around the principal point where the relief displacements (which cannot be removed) are at a minimum."[2]

"It is quite reasonable to conclude that some form of photomap will become the standard general map of the future." [4] go on to suggest that, "photomapping would appear to be the only way to take reasonable advantage" of future data sources like high altitude aircraft and satellite imagery. The highest resolution aerial photomaps on GoogleEarth are approximately 2.5 cm spatial resolution images. The highest resolution photomap of ortho images was made in Hungary in 2012 with a 0.5 cm spatial resolution.

Photomapping in Archaeology

Capturing a digital overhead photograph for photomapping purposes
Using a pentop computer to photomap an archaeological excavation in the field

Demonstrating the link between orthophotomapping and archaeology,[5] historic airphotos photos were used to aid in developing a reconstruction of the Ventura mission that guided excavations of the structure's walls.

Pteryx UAV, a civilian UAV for aerial photography and photomapping with roll-stabilised camera head

Overhead photography has been widely applied for mapping surface remains and excavation exposures at archaeological sites. Suggested platforms for capturing these photographs has included: War Balloons from World War I;[6] rubber meteorological balloons;[7] kites;[7][8] wooden platforms, metal frameworks, constructed over an excavation exposure;[7] ladders both alone and held together with poles or planks; three legged ladders; single and multi-section poles;[9][10] bipods;[11][12][13][14] tripods;[15] tetrapods[16][17] aerial bucket trucks ("cherry pickers"),[18] and light weight individuals dangling from the limb of a nearby tree.

Hand held near nadir over head digital photographs have been used with geographic information systems (GIS) to record excavation exposures.[19][20][21][22][23]

External links

Notes

  1. ↑ Robinson et al. (1977:16)
  2. 1 2 Petrie (1977: 50)
  3. ↑ Petrie (1977: 49)
  4. ↑ Robinson et al. (1977:10)
  5. ↑ Estes et al. (1977)
  6. ↑ Capper (1907)
  7. 1 2 3 Guy (1932)
  8. ↑ Bascom (1941)
  9. ↑ Schwartz (1964)
  10. ↑ Wiltshire (1967)
  11. ↑ Kriegler (1928)
  12. ↑ Hampl (1957)
  13. ↑ Whittlesey (1966)
  14. ↑ Fant and Loy (1972)
  15. ↑ Straffin (1971)
  16. ↑ Simpson and Cooke (1967)
  17. ↑ Hume (1969)
  18. ↑ Sterud and Pratt (1975)
  19. ↑ Craig (2000)
  20. ↑ Craig (2002)
  21. ↑ Craig and Aldenderfer (2003)
  22. ↑ Craig (2005)
  23. ↑ Craig et al. (2006)

References

This article is issued from Wikipedia - version of the Wednesday, January 27, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.