Portage Canal
- For the Portage Canal located in the Keweenaw Peninsula, see Keweenaw Waterway.
|
Portage Canal | |
 | |
|
Frozen Portage Canal in December 2011 | |
  | |
| Location | Between the Fox and Wisconsin Rivers, Portage, WI |
|---|---|
| Coordinates | 43°32′49″N 89°26′50″W / 43.54694°N 89.44722°WCoordinates: 43°32′49″N 89°26′50″W / 43.54694°N 89.44722°W |
| Built | 1835 |
| Architect | Conro,Starke & Co.; U.S.Army Corps of Engineers |
| NRHP Reference # | 77000030 [1] |
| Added to NRHP | August 26, 1977 |
The Portage Canal was built to connect the Fox River and Wisconsin River at Portage, Wisconsin along the Fox-Wisconsin Waterway.[2] For a time, it completed a route from the north Atlantic Ocean, through the St. Lawrence Seaway and down the Mississippi River to the Gulf of Mexico, and back to the Atlantic.
Numerous attempts were made to build the thin Wisconsin-Fox connection through the marshy land, beginning in 1837 with the formation of the "Portage Canal Company". Digging and hauling by hand through two and a half miles of muddy terrain, the project was quickly abandoned. A second project, started in 1849, managed to cut a path usable by canoe, but not viable for commerce. The final project, complete with locks to raise the water level of the Fox to that of the Wisconsin's was not completed until 1876 by the Army Corps of Engineers. Unfortunately, by then, the railroads were quick on their way, followed soon thereafter by the automobile. The Portage Canal acquired a new steel gate and concrete lock in 1926 due to a rupture of the 1876 wooden gate and the quoin post of the west gate of the lock in April 1926. A local contractor, M.E. White Company of Chicago, Illinois was awarded the bid, August 1926. The firm completed the repairs of lock and replace of the 1876 wooden gate under the supervision of the U. S Army Corps of Engineers, Milwaukee, Wisconsin. The 1926 Portage Canal Lock was the first steel and concrete lock on the Fox River. The subcontractor for the steel gate was the Lakeside Bridge and Steel Company of Wisconsin. During the re-construction process the Engineers were faced with containing underground springs beneath the lock, which caused considerable delays. The White Construction Co. repaired the fallen wall and dismantled the remaining wall of the lock, which were re-laid, and constructed according to the original configurations of the 1876 construction. The White Construction Company used 9,000 barrels of Portland cement in order for the locks completion. The canal lock and new gate were completed in the May 1928.[3]
The use of the canal as a major means of commerce lasted only a few decades, though pleasure craft, including steamboats, continued to ply the narrow waterway. In following years, the canal began to degrade through lack of upkeep. The canal was used until 1951, when the Fort Winnebago Lock was bulldozed in and the Wisconsin River Locks were welded shut. [4]
Currently, water pumps provide the only substantial flow and aeration. Continued attempts have been made to restore the remainder of the canal to its original condition and the Portage Canal Society continues to try to raise funds and make improvements. In the fall of 2015, ground was broken along the eastern part of the downtown section to construct government offices and is expected to be completed in the fall of 2016 or early 2017. [5]
Notes
- ↑ Staff (2007-01-23). "National Register Information System". National Register of Historic Places. National Park Service.
- ↑ "Portage Canal". Geographic Names Information System. United States Geological Survey.
- ↑ Dutch, Steven. "Portage Canal", Natural and Applied Sciences, University of Wisconsin - Green Bay, retrieved February 22, 2011.
- ↑ "Portage Canal", Fox Wisconsin Heritage Parkway, retrieved March 2016.
- ↑ Lodi Enterprise. "Eminent domain options explored", Lodi Enterprise retrieved March 16 2016.
External links
| ||||||||||||||||||||||||||
