Debugging

"Debug" redirects here. For the shell command, see debug (command). For the German magazine, see Debug (magazine). For the 2014 film, see Debug (film).
Software development process
Core activities
Paradigms and models
Methodologies and frameworks
Supporting disciplines
Tools
Standards and BOKs

Debugging is the process of finding and resolving of defects that prevent correct operation of computer software or a system. Debugging tends to be harder when various subsystems are tightly coupled, as changes in one may cause bugs to emerge in another.

Numerous books have been written about debugging (see below: Further reading), as it involves numerous aspects, including interactive debugging, control flow, integration testing, log files, monitoring (application, system), memory dumps, profiling, Statistical Process Control, and special design tactics to improve detection while simplifying changes.

Origin

A computer log entry from the Mark II, with a moth taped to the page

The terms "bug" and "debugging" are popularly attributed to Admiral Grace Hopper in the 1940s.[1] While she was working on a Mark II Computer at Harvard University, her associates discovered a moth stuck in a relay and thereby impeding operation, whereupon she remarked that they were "debugging" the system. However the term "bug" in the meaning of technical error dates back at least to 1878 and Thomas Edison (see software bug for a full discussion), and "debugging" seems to have been used as a term in aeronautics before entering the world of computers. Indeed, in an interview Grace Hopper remarked that she was not coining the term. The moth fit the already existing terminology, so it was saved. A letter from J. Robert Oppenheimer (director of the WWII atomic bomb "Manhattan" project at Los Alamos, NM) used the term in a letter to Dr. Ernest Lawrence at UC Berkeley, dated October 27, 1944,[2] regarding the recruitment of additional technical staff.

The Oxford English Dictionary entry for "debug" quotes the term "debugging" used in reference to airplane engine testing in a 1945 article in the Journal of the Royal Aeronautical Society. An article in "Airforce" (June 1945 p. 50) also refers to debugging, this time of aircraft cameras. Hopper's bug was found on September 9, 1947. The term was not adopted by computer programmers until the early 1950s. The seminal article by Gill[3] in 1951 is the earliest in-depth discussion of programming errors, but it does not use the term "bug" or "debugging". In the ACM's digital library, the term "debugging" is first used in three papers from 1952 ACM National Meetings.[4][5][6] Two of the three use the term in quotation marks. By 1963 "debugging" was a common enough term to be mentioned in passing without explanation on page 1 of the CTSS manual.[7]

Kidwell's article Stalking the Elusive Computer Bug[8] discusses the etymology of "bug" and "debug" in greater detail.

Scope

As software and electronic systems have become generally more complex, the various common debugging techniques have expanded with more methods to detect anomalies, assess impact, and schedule software patches or full updates to a system. The words "anomaly" and "discrepancy" can be used, as being more neutral terms, to avoid the words "error" and "defect" or "bug" where there might be an implication that all so-called errors, defects or bugs must be fixed (at all costs). Instead, an impact assessment can be made to determine if changes to remove an anomaly (or discrepancy) would be cost-effective for the system, or perhaps a scheduled new release might render the change(s) unnecessary. Not all issues are life-critical or mission-critical in a system. Also, it is important to avoid the situation where a change might be more upsetting to users, long-term, than living with the known problem(s) (where the "cure would be worse than the disease"). Basing decisions of the acceptability of some anomalies can avoid a culture of a "zero-defects" mandate, where people might be tempted to deny the existence of problems so that the result would appear as zero defects. Considering the collateral issues, such as the cost-versus-benefit impact assessment, then broader debugging techniques will expand to determine the frequency of anomalies (how often the same "bugs" occur) to help assess their impact to the overall system.

Tools

Debugging on video game consoles is usually done with special hardware such as this Xbox debug unit intended only for developers.
See also: Debugger

Debugging ranges, in complexity, from fixing simple errors to performing lengthy and tiresome tasks of data collection, analysis, and scheduling updates. The debugging skill of the programmer can be a major factor in the ability to debug a problem, but the difficulty of software debugging varies greatly with the complexity of the system, and also depends, to some extent, on the programming language(s) used and the available tools, such as debuggers. Debuggers are software tools which enable the programmer to monitor the execution of a program, stop it, restart it, set breakpoints, and change values in memory. The term debugger can also refer to the person who is doing the debugging.

Generally, high-level programming languages, such as Java, make debugging easier, because they have features such as exception handling that make real sources of erratic behaviour easier to spot. In programming languages such as C or assembly, bugs may cause silent problems such as memory corruption, and it is often difficult to see where the initial problem happened. In those cases, memory debugger tools may be needed.

In certain situations, general purpose software tools that are language specific in nature can be very useful. These take the form of static code analysis tools. These tools look for a very specific set of known problems, some common and some rare, within the source code. All such issues detected by these tools would rarely be picked up by a compiler or interpreter, thus they are not syntax checkers, but more semantic checkers. Some tools claim to be able to detect 300+ unique problems. Both commercial and free tools exist in various languages. These tools can be extremely useful when checking very large source trees, where it is impractical to do code walkthroughs. A typical example of a problem detected would be a variable dereference that occurs before the variable is assigned a value. Another example would be to perform strong type checking when the language does not require such. Thus, they are better at locating likely errors, versus actual errors. As a result, these tools have a reputation of false positives. The old Unix lint program is an early example.

For debugging electronic hardware (e.g., computer hardware) as well as low-level software (e.g., BIOSes, device drivers) and firmware, instruments such as oscilloscopes, logic analyzers or in-circuit emulators (ICEs) are often used, alone or in combination. An ICE may perform many of the typical software debugger's tasks on low-level software and firmware.

Typical debugging process

Normally the first step in debugging is to attempt to reproduce the problem. This can be a non-trivial task, for example as with parallel processes or some unusual software bugs. Also, specific user environment and usage history can make it difficult to reproduce the problem.

After the bug is reproduced, the input of the program may need to be simplified to make it easier to debug. For example, a bug in a compiler can make it crash when parsing some large source file. However, after simplification of the test case, only few lines from the original source file can be sufficient to reproduce the same crash. Such simplification can be made manually, using a divide-and-conquer approach. The programmer will try to remove some parts of original test case and check if the problem still exists. When debugging the problem in a GUI, the programmer can try to skip some user interaction from the original problem description and check if remaining actions are sufficient for bugs to appear.

After the test case is sufficiently simplified, a programmer can use a debugger tool to examine program states (values of variables, plus the call stack) and track down the origin of the problem(s). Alternatively, tracing can be used. In simple cases, tracing is just a few print statements, which output the values of variables at certain points of program execution.

Techniques

Debugging for embedded systems

In contrast to the general purpose computer software design environment, a primary characteristic of embedded environments is the sheer number of different platforms available to the developers (CPU architectures, vendors, operating systems and their variants). Embedded systems are, by definition, not general-purpose designs: they are typically developed for a single task (or small range of tasks), and the platform is chosen specifically to optimize that application. Not only does this fact make life tough for embedded system developers, it also makes debugging and testing of these systems harder as well, since different debugging tools are needed in different platforms.

Anti-debugging

Anti-debugging is "the implementation of one or more techniques within computer code that hinders attempts at reverse engineering or debugging a target process".[13] It is actively used by recognized publishers in copy-protection schemas, but is also used by malware to complicate its detection and elimination.[14] Techniques used in anti-debugging include:

An early example of anti-debugging existed in early versions of Microsoft Word which, if a debugger was detected, produced a message that said: "The tree of evil bears bitter fruit. Now trashing program disk.", after which it caused the floppy disk drive to emit alarming noises with the intent of scaring the user away from attempting it again.[15][16]

See also

References

  1. Grace Hopper from FOLDOC
  2. http://bancroft.berkeley.edu/Exhibits/physics/images/bigscience25.jpg
  3. S. Gill, The Diagnosis of Mistakes in Programmes on the EDSAC, Proceedings of the Royal Society of London. Series A, Mathematical and Physical Sciences, Vol. 206, No. 1087 (May 22, 1951), pp. 538-554
  4. Robert V. D. Campbell, Evolution of automatic computation, Proceedings of the 1952 ACM national meeting (Pittsburgh), p 29-32, 1952.
  5. Alex Orden, Solution of systems of linear inequalities on a digital computer, Proceedings of the 1952 ACM national meeting (Pittsburgh), p. 91-95, 1952.
  6. Howard B. Demuth, John B. Jackson, Edmund Klein, N. Metropolis, Walter Orvedahl, James H. Richardson, MANIAC, Proceedings of the 1952 ACM national meeting (Toronto), p. 13-16
  7. The Compatible Time-Sharing System, M.I.T. Press, 1963
  8. Peggy Aldrich Kidwell, Stalking the Elusive Computer Bug, IEEE Annals of the History of Computing, 1998.
  9. Postmortem Debugging, Stephen Wormuller, Dr. Dobbs Journal, 2006
  10. E. J. Gauss (1982). ""Pracniques: The "Wolf Fence" Algorithm for Debugging",".
  11. Andreas Zeller: Why Programs Fail: A Guide to Systematic Debugging, Morgan Kaufmann, 2005. ISBN 1-55860-866-4
  12. Kent Beck, Hit 'em High, Hit 'em Low: Regression Testing and the Saff Squeeze
  13. Shields, Tyler (2008-12-02). "Anti-Debugging Series - Part I". Veracode. Retrieved 2009-03-17.
  14. 1 2 Software Protection through Anti-Debugging Michael N Gagnon, Stephen Taylor, Anup Ghosh
  15. Ross J. Anderson. Security Engineering. p. 684. ISBN 0-471-38922-6.
  16. "Microsoft Word for DOS 1.15".

Further reading

External links

Wikiquote has quotations related to: Debugging
The Wikibook Computer Programming Principles has a page on the topic of: Debugging
This article is issued from Wikipedia - version of the Thursday, April 07, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.