Progetto K

Progetto K Maserati Tipo 61 'Birdcage'. The body of this model is a thick diecast metal while the base is a thin plastic. Earlier boxes were clear acrylic plastic display 'cases' inside of cardboard. The display boxes were dropped for later models.

Progetto K Automodelli, or sometimes simply referred to as PK ("Project K" in English), was an Italian diecast model company. Brands produced were usually Italian cars of the 1950s through the 1970s. Most models were diecast in plastic or resin - some had diecast bases and some were plastic. Though earlier models were made in Rome, the company's main factory was eventually moved to Sesto Fiorentino, a village just to the north of Florence in Firenze. The first models were made about 1977; the last about 2011.

History in resin

Progetto K was started by Fabrizio Petrucci who has previously made a variety of hand-crafted models in resin under the name King Model produced in the Centocelle region of Rome in the 1970s (Progetto K 2012). Petrucci is recognized as among the earlier modelers to make 1:43 scale cars for the collectible market. King Model produced Italian auto subjects mainly from the 1930s through the 1950s, and were usually early Alfa Romeos and FIATs. Some King Model selections were: the Fiat 1500, 1500E musone, 1100, 1100 BLR taxi, 508L, 500C, 508C long tail, 500C wagon, 1900B granluce, Alfa Romeo 2300B, 8C 2300, and a Lancia Aurelia B24 spider.

About 1977, Petrucci started Progetto K and started the mass production of models in resin and metal (Progetto K 2012). The early factory was on the east side of Rome just inside the A90 beltway. Later, production was moved to Sesto Fiorentino on the north side of Florence. Even as mainly a small family business, PK became nearly as accomplished in output as the metal diecast model makers Rio Models, Brumm or Vitesse Models. Yet the location of Progetto K in central Italy is not typical as most accomplished diecast and collectible model makers originated in the industrial north usually in the vicinity of greater Milan.

Model selections

Models produced by Progetto K were most often Italian brands such as Alfa Romeo, Fiat (and Spanish SEAT), Lancia, Autobianchi, Ferrari, and Maserati mainly from the 1950s through the 1980s, but considering paint and livery variations, Alfa Romeo seemed to be the favorite brand offered, particularly the Giulia sedan and wagon and Bertone 2000 GTA (Klaus, No date). Some of these were selections in Petrucci's previous King Model line, but more models and variations were gradually added to the Progetto K line. The following are most of Progetto K's offerings (see Catalogo 2006).

Ferrari 225 S cabriolet by Progetto K. This model, unlike the Maserati, is a plastic body with diecast chassis.

Alfa Romeos offered were the 1950s 2 van, 1960s F12 van (high top and normal roof), Giulia sedan, wagon, and panel versions; 1960s GTA, 2000 Berlina sedan, 1970s Alfetta 2000 sedan and GTV coupe, 1977 Giuletta Stradale, and the 1980s model 75 sedan.

FIAT models were the 1950s 1100 sedan, 238 van, 600D and 750D two doors, 600 Abarth, 600 Seat (Spain) car based utility van, 600 van, 1960s 850 sport coupe, Abarth 1300, Campagnola (with and without canvas top), Dino Spyder Stradale, and 1970s Ritmo.

Ferraris appearing were two: the 1958 250 TR coupe and 225 roadster. The only Lancia seen consisted of variations on the Fulvia coupe from the mid-1960s through the 1970s, The only Maserati offered was the Tipo 61 'Birdcage', and the only Autobianchis were the 1957 Bianchina cabriolet and coupe.

Marketing

Similar to Brumm, Progetto K made selected models in many many racing, promotional, fire, fire prevention, Red Cross, polizia and Carabinieri liveries (Johnson 1998, p. 191; Progetto K No date). Some of their most endearing and clever models were their Fiat and Alfa Romeo race assistance cars and trucks with tires, parts, fuel drums and other items on their roofs.

The headlight detail with clear lenses and chrome bezels on the 225 S is admirable, but grille looks a tad crude.

In the 1970s, Progetto K resin pieces were limited to about 200, but during the 1980s, PK entered mass production and the international market (Collection Ferrari 2015). Some of these models were resin and some were diecast. Since about the year 2000, many liveries have been offered - now between 1,000 and 2,000 pieces each. Models were often praised but at prices between $40.00 to $50.00, some complained that detail was not as good as Brumm or others (Alfa Romeo 2011). Some models seemed spot on in detail and proportion, while others suffered from an incomplete or slightly rubbery look. Still, today many Progetto K models can had on eBay below $20.00 and while early models can be rare, most are relatively easy to acquire (Graham Ruckert 2007). Many colorful catalogues were produced displaying complete offerings available.

Progetto K models were intended for collectors only and earlier boxes advised that they were not for children younger than 14. A few of the later models said the cars were not even suitable for those younger than 16! The proscription seems harsh, but the statement of the sub-text here is, 'we're serious, these are not toys'.

Model details

Early Progetto K models were resin, but as time passed, materials were used in different ways. The Maserati Tipo 61 'Birdcage' had a heavy diecast body with a rather thin plastic base. The body for this model is very well finished and proportioned, but thickly molded and not at all delicate (a contrast to the thin skin of the real car!). The 'Birdcage' tubing protruded (like the real car) back into the cockpit and the seats were simply pressed into place on plastic pegs on the chassis. Realistic side pipes on the passenger side, roll bar, and gas cap adorn the body. Headlights were mercifully made of clear plastic, so they have a very authentic look (no 'jewels' here). Some of the body vent detail is done with decals and could look better. The tires on earlier models were nicely made out of rubber and the 'wire' wheels had deeper shaded indentations around the wires that was satisfying.

The 225 S's seats are diecast metal - part of the molding of the diecast chassis which is extruded up into the cockpit.

Contrast this with the later Ferrari 225S convertible. In a reversal, its body was resin while the base was diecast. The Ferrari's seats are part of the diecast metal chassis molding and they protrude up into the cockpit, one supposed this saves on the production of extra plastic parts, but then why not just make the whole model in detailed plastic? Wheels are again a wire design, but not as deeply molded and not as realistic as those on the Maserati. The tires are a hard plastic - no rubber here. Headlights, again a plus, are done in a detailed manner with delicate clear plastic lenses on top of plastic bezel bases. Some of the trim, like the chrome striping used for the rocker panels just looks like what it is - stuff stuck on.

The change in materials seems to indicate cost cutting with the passage of time. Over the decades less metal was used and less rubber. Plastic became more prominent and some of the detailing suffers.

Different from the Maserati, the Ferrari's base is diecast metal, not plastic.

Earlier models had better packaging with hard clear plastic cases put into cardboard containers often with an information card. Early box colors were blue with white lettering or yellow with black lettering. Later boxes were simpler flimsier cardboard in a cream tone with blue lettering and plastic paper windows. The hard plastic clear acrylic display boxes were apparently no longer offered.

Economic downturn

What started in the 1970s as a family owned business and one of the earliest experiments with collector diecast ended in July of 2011, a casualty of the global economic downturn (Alfa Romeo 2011). Finances became difficult and the firm ceased production (Progetto K 2012). At this time Progetto K had become part of the Pego Italia Group which also made Portuguese Exem, PinKo, and Mamone (Graham Ruckert 2007). Still, the company was one of the last lower cost, mass production trending model companies to continue production in Europe when most others had closed their doors, gone ultra expensive or moved to Asia.

Attention editors
This page uses parenthetical referencing, a simple form of providing inline citations. Per Wikipedia:Citing sources, please continue to maintain this style and do not add references using <ref> tags to this page. If you have any problems, please ask on the talk page and someone will be happy to help you. Thank you.

References

This article is issued from Wikipedia - version of the Friday, April 03, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.