Provenance (geology)

Provenance in geology, is the reconstruction of the history of sediments movements over time. The Earth is not a static but a dynamic planet, all rocks are subject to transition between the three main rock types, which are sedimentary, metamorphic, and igneous rocks (the rock cycle). Rocks exposed to the surface, sooner or later, are broken down into sediments. Sediments are expected to be able to provide evidence of the erosion history of their parent source rocks. The purpose of provenance study is to restore the tectonic, paleo-geographic and paleo-climatic history.

Introduction

Conglomerate, sandstone, river sands and zircon grains. Provenance studies use many types of detrital records to unveil regional tectonic history.

Provenance (from the French provenir, "to come from"), is the chronology of the ownership, custody or location of a historical object...[1] In geology (specifically, in sedimentary petrology), the term provenance dealt with question where the sediments came from and how they got to the place they are today. The purpose of sedimentary provenance studies is to reconstruct and to interpret the history of sediment from parent rocks at a source area to detritus at a burial place.[2] The ultimate goal of provenance studies is to investigate the characteristics of a source area by analyzing the composition and texture of sediments.[3] The studies of provenance involve the following aspects: "(1) the source(s) of the particles that make up the rocks, (2) the erosion and transport mechanisms that moved the particles from source areas to depositional sites, (3) the depositional setting and depositional processes responsible for sedimentation of the particles (the depositional environment), and (4) the physical and chemical conditions of the burial environment and diagenetic changes that occur in siliciclastic sediment during burial and uplift".[4] Provenance studies are conducted to investigate many scientific questions, for example, the growth history of continental crust,[5][6] collision time of Indian and Asian plates,[7] Asian monsoon intensity, and Himalayan exhumation[8] Meanwhile, the provenance methods are widely used in the oil and gas industry. "Relations between provenance and basin are important for hydrocarbon exploration because sand frameworks of contrasting detrital compositions respond differently to diagenesis, and thus display different trends of porosity reduction with depth of burial."[9]

Source of detritus

All rock exposed at the Earth's surface is subjected to physical or chemical weathering and broken down into finer grained sediment. All three types of rocks (igneous, sedimentary and metamorphic rocks) can be the source of detritus.

Transportation of detritus

Distribution of detritus

Rocks are transported downstream from higher elevation to lower elevation. Source rocks and detritus are transported by gravity, water, wind or glacial movement. The transportation process breaks rocks into smaller particles by physical abrasion, from big boulder size into sand or even clay size. At the same time minerals within the sediment can also be changed chemically, only minerals that are more resistant to chemical weathering can survive (e.g. ultrastable minerals zircon, tourmaline and rutile). During the transportation, minerals can be sorted by their density, and as a result, light minerals like quartz and mica can be moved faster and further than heavy minerals (like zircon and tourmaline).

Accumulation of detritus

Detritus distribution of the Himalayas

After a certain distance of transportation, detritus reaches a sedimentary basin and accumulates in one place. With the accumulation of sediments, sediments are buried to a deeper level and go though diagenesis, which turns separate sediments into sedimentary rocks (i.e. conglomerate, sandstone, mudrocks, limestone etc.) and some metamorphic rocks (such as quartzite) which were derived from sedimentary rocks. After sediments are weathered and eroded from mountain belts, they can be carried by stream and deposited along rivers as river sands. Detritus can also be transported and deposited in foreland basins and at offshore fans. The detrital record can be collected from all these places and can be used in provenance studies.[10][11][12]

Detritus Type Depositional environment Location Coordinates Reference
Loess sand Loess Loess Plateau 38°24′N 108°24′E / 38.4°N 108.4°E / 38.4; 108.4 [13]
Detrital apatite Continental margin East Greenland Margin 63°30′N 39°42′W / 63.5°N 39.7°W / 63.5; -39.7 [10]
Detrital zircon Modern river Red River 22°34′N 103°53′E / 22.56°N 103.88°E / 22.56; 103.88 [14]
Heavy mineral Accretionary complex South-central Alaska 61°00′N 149°42′W / 61.00°N 149.70°W / 61.00; -149.70 [15]
Detrital zircon Ancient passive continental margin Southern Lhasa terrane 29°15′N 85°15′E / 29.25°N 85.25°E / 29.25; 85.25 [7]
Detrital zircon Foreland basin Nepal Himalayan foreland basin 27°52′N 83°34′E / 27.86°N 83.56°E / 27.86; 83.56 [16]

Reworking of detritus

After detritus are eroded from source area, they are transported and deposited in river, foreland basin or flood plain. Then the detritus can be eroded and transported again when flooding or other kinds of eroding events occur. This process is called as reworking of detritus. And this process could be problematic to provenance studies.[17] For example, U-Pb zircon ages are generally considered to reflect the time of zircon crystallization at about 750 Celsius and zircon is resistant to physical abrasion and chemical weathering. So zircon grains can survive from multiple cycle of reworking. This means if the zircon grain is reworked (re-eroded) from a foreland basin (not from original mountain belt source area) it will loss information of reworking (detrital record can not indicate the foreland basin as source area but earlier mountain belt as source area). To avoid this problem, samples can be collected close to the mountain front, upstream from which there is no significant sediment storage.[12]

Development of provenance methods

The study of sedimentary provenance involves several geological disciplines, including mineralogy, geochemistry, geochronology, sedimentology, igneous and metamorphic petrology.[18] The development of provenance methods are heavily dependent on the development of these mainstream geological disciplines. The earliest provenance studies were primarily based on paleocurrent analysis and petrographic analysis (composition and texture of sandstone and conglomerate).[19] Since the 1970s, provenance studies shifted to interpret tectonic settings (i.e. magmatic arcs, collision orogens and continental blocks) using sandstone composition.[9] Similarly, bulk rock geochemistry techniques are applied to interpret provenance linking geochemical signatures to source rocks and tectonic settings. Later, with the development of chemical and isotopic micro-analysis methods and geochronological techniques(e.g. ICP-MS, SHRIMP), provenance researches shifted to analyze single mineral grains. The following table has examples of where provenance study samples are collected.

Provenance methods

Generally, provenance methods can be sorted into two categories, which are petrological methods and geochemical methods. Examples of petrological methods include QFL ternary diagram, heavy mineral assemblages (apatite-tourmaline index, garnet zircon index), clay mineral assemblages and illite crystallinity, reworked fossils and palynomorphs, and stock magnetic properties. Examples of geochemical methods include zircon U-Pb dating (plus Hf isotope), zircon fission track, apatite fission track, bulk sediment Nd and Sr isotopes, garnet chemistry, pyroxene chemistry, amphibole chemistry and so on. There is a more detailed list below with references to various types of provenance methods.

Method Case studies Strength
Zircon U-Pb dating [12]

[20][21]

 Determine detrital zircon age of crystallization
Zircon U-Pb plus Hf isotopes [22][14][23] εHf(t) > 0, Granite melts formed by the melting of young crust recently formed from depleted mantle generates zircons with radiogenic initial isotopic compositions similar to that of their mantle source; εHf(t) < 0, Felsic melts derived from melting of reworked, old continental crust generates zircons with unradiogenic initial Hf isotope ratios.[24]
Apatite fission track [10][25][26][27] Thermochronological age (when mineral pass closure temperature).
Zircon fission track [28][29] Thermochronological age, crystallization age, lag time (thermochronological age minus the depositional age)[30]
Zircon He and U-Pb double dating [17][31][32] "This method gives both the high temperature (~900C) U–Pb crystallization and low temperature (~180C) (U–Th)/He exhumation ages for the same zircon."[17]
Bulk sediment Nd and Sr [31][33] Nd model age , ultimate protolith or source area
Bulk sediment Pb isotopes [34] Complicated Pb isotopes systematics makes it powerful tool to exam a source rock's geologic history especially in ancient heritage.[34]
Heavy mineral assemblages (apatite-tourmaline index,garnet zircon index) [35][36] Heavy mineral assemblage of sedimentary rock is a function of the source rock type. For example,kyanite and sillimanite assemblage-rich indicates high-grade metamorphic source rocks
Garnet geochemistry [37] N/A
Ar-Ar mica dating [38][39] Indicate time of mica cooling through Ar-Ar closure temperature due to exhumation.
Nd isotopes in apatite [40] Nd model age (reference), ultimate protolith or source area.
Pyroxene chemistry [37][15] Variable chemistry composition Ca-Mg-Fe indicative of source magma and source rock.
Amphibole chemistry [37][41] Major and trace element analyses of amphibole grains are used to provenance studies.
Pb isotopes in K-feldspar [42] N/A
Clay mineralogy (assemblages and illite crystallinity)[43] Original abundance of clay minerals in source determines the assemblege distribution in detrital record. The weathering and change of chemical composition also affect distribution.
Monazite U-Pb dating [11] Determine detrital monozite mineral age of crystallization.
Heavy mineral stability during diagenesis N/A N/A
Bulk sediment trace element chemistry [44] More sensitive indicators of geological processes than major elements
Rutile U-Pb N/A Determine detrital rutile mineral age of crystallization
U-Pb detrital titanite [45] Determine detrital titanite age of crystallization
Zircon REE and Th/U [46][47][48] Zircon grain derived from different types of granite can be discriminated by their REE ratios.
Reworked fossils and palynomorphs [49][50] Use reworked fossil (caused by compression, heating, oxidation, microbial attack) and Palynomorphs (plant or animal structure, resistance to decay, sporopollenin chitin to find where sediment derived from.
Bulk sediment Ar-Ar [51][52] age of a mineral or whole rock cooled below closure temperature.
Quartz Equivalent Series Resistance(ESR) [53][54] Use ESR intensity to correlate detrital record with source rock.
Rock magnetic properties [55][56] Substitute or supplement geochemical provenance data, using magnetic susceptibility, hysteresis loops, theromagnetic curves and iron-oxide mineral petrography to correlate sediment with source area.

Examples of provenance methods

Sandstone composition and plate tectonics

QFL diagram, “ Q is total quartzose grains; F is total feldspar grains; L is total unstable lithic fragments. “(Dickinson and Suczek, 1979[9])

This method is widely used in provenance studies and it has the ability to link sandstone composition to tectonic setting. This method is described in the Dickinson and Suczek 1979 paper.[9] Detrital framework modes of sandstone suites from different kinds of basins are a function of provenance types governed by plate tectonics. (1)Quartzose sands from continental cratons are widespread within interior basins, platform successions, miogeoclinal wedges, and opening ocean basins. (2)Arkosic sands from uplifted basement blocks are present locally in rift troughs and in wrench basins related to transform ruptures. (3)Volcaniclastic lithic sand and more complex volcano-plutonic sands derived from magmatic arcs are present in trenches, forearc basins and marginal seas. (4) Recycled orogenic sands, rich in quartz or chert plus other lithic fragments and derived from subduction complexes, collision orogens, and foreland uplifts, are present in closing ocean basins. Triangular diagrams showing framework proportions of quartz, the two feldspars, polycrystalline quartzose lithics, and unstable lithics of volcanic and sedimentary parentage successfully distinguish the key provenance types."[9]

Resolving provenance problems by dating detrital minerals

An example of U–Pb relative age probability diagram, edited from [7]

Geochronology and thermochronology are more and more applied to solve provenance and tectonic problems.[57][16][58][59][60] Detrital minerals used in this method include zircons, monazites, white micas and apatites. The age dated from these minerals indicate timing of crystallization and multiple tectono-thermal events. This method is base on the following considerations: "(1) the source areas are characterized by rocks with different tectonic histories recorded by distinctive crystallization and cooling ages; (2) the source rocks contain the selected mineral;" [61] (3) Detrital mineral like zircon is ultra-stable which means it is capable of surviving multiple phases of physical and chemical weathering, erosion and deposition. This property make these detrital mineral ideal to record long history of crystallization of tectonically complex source area.

The figure to the right is an example of U-Pb relative age probability diagram.[16] The upper plot shows foreland basin detrital zircon age distribution. The lower plot shows hinterland (source area) zircon age distribution. In the plots, n is the number of analyzed zircon grains. So for foreland basin Amile formation, 74 grains are analyzed. For source area (divided into 3 tectonic level, Tethyan Himalaya, Greater Himalaya and Lesser Himalaya), 962, 409 and 666 grains are analyzed respectively. To correlate hinterland and foreland data, let's see the source area record first, Tethyan sequence have age peak at ~500 Myr, 1000 Myr and 2600 Myr, Greater Himalaya has age peaks at ~1200 Myr and 2500 Myr, and Lesser Himalaya sequence has age peaks at ~1800 Ma and 2600 Ma. By simply comparing the foreland basin record with source area record, we cam see that Amile formation resemble age distribution of Lesser Himalaya. It has about 20 grains with age ~1800 Myr (Paleoproterozoic) and about 16 grains yield age of ~2600 Myr (Archean). Then we can interpret that sediments of Amile formation are mainly derived from the Lesser Himalaya, and rocks yield ago of Paleoproterozoic and Archean are from the Indian craton. So the story is: Indian plate collide with Tibet, rocks of Indian craton deformed and involved into Himalayan thrust belt (e.g. Lesser Himalaya sequence), then eroded and deposited at foreland basin.

U–Pb geochronology of zircons was conducted by laser ablation multicollector inductively coupled plasma mass spectrometry (LA-MC-ICPMS).

Bulk sediment Nd and Sr

Nd isotope evolution in mantle and crust.[62]
An example of Nd and Sr isotopic data plots which are used in provenance studies

Depend on properties of Sm-Nd radioactive isotope system can provide age estimation of sedimentary source rocks. It has been used in provenance studies.[31][33][63][64] 143Nd is produced by α decay of 147Sm and has a half life of 1.06×1011 years. Variation of 143Nd/144Nd is caused by decay of 147Sm. Now Sm/Nd rato of the mantle is higher than that of the crust and 143Nd/144Nd ratio is also higher than in the mantle than in the crust. 143Nd/144Nd ratio is expressed in εNd notation (DePaolo and Wasserbur 1976).[64] \epsilon Nd = 10^4 \left[\frac{^143Nd/^144Nd_{sample} (T)}{^143Nd/^144Nd_{CHUR}(T)}-1 \right]. CHUR refer to Chondritic Uniform Reservoir. So ϵNd is a function of T (time). Nd isotope evolution in mantle and crust in shown in the figure to the right. The upper plot (a), bold line shows the evolution of the bulk earth or CHUR(chondritic uniform reservoir). The lower plot (b) shows evolution of bulk earth (CHUR) crust and mantle, 143Nd/144Nd is transformed to εNd.[62] Normally, the most rocks have εNd values in the range of -20 to +10. Calculated εNd value of rocks can be correlated to source rocks to perform provenance studies.What's more, Sr and Nd isotopes have been used to study both provenance and weathering intensity.[33] Nd is mainly unaffected by weathering process but 87Sr/86Sr value is more affected by chemical weathering.[65][66]

Lab data acquisition and instruments

Sensitive High Resolution Ion Microprobe (SHRIMP II) at Curtin University, Western Australia

To pick suitable lab data acquisition to sediment provenance, grain size should be taken into consideration. For conglomerates and boulders, as original mineral paragenesisis preserved, almost all analytical methods can be used to study the provenance.[67] For finer grained sediments, as they always lose paragenetic information, only a limited range of analytical methods can be used.

Lab data acquisition approaches for provenance study fall into the following three categories: (1) analyzing bulk composition to extract petrographic, mineralogical and chemical information. (2) analyzing specific groups of minerals such as heavy minerals and (3) analyzing single mineral grains about morphological, chemical and isotopic properties.

For bulk composition analysis, samples are crushed, powdered and disintegrated or melted. Then measurement of major and trace and rare-earth (REE) elements are conducted by using instruments like atomic absorption spectroscopy (AAS), X-ray fluorescence(XRF), neutron activation analysis (NAA) etc.

Sand-sized sediments are able to be analyzed by single-grain methods. Single-grain methods can be divided into the following three groups: (1) Microscopic-morphological techniques, which are used to observe shape, color and internal structures in minerals. For example, scanning electron microscope (SEM) and cathodoluminescence (CL) detector.[68][69] (2) Single grain geochemical techniques, which are used to acquire chemical composition and variations within minerals. For example, laser-ablation inductively coupled plasma mass spectrometry (ICP-MS).[70] (3) Radiometric dating of single grain mineral, which can determine the geochronological and thermochronological properties of minerals. For example, U/Pb SHRIMP dating and 40Ar/39Ar laser-probe dating.[71]

For more information about instruments, see

Problems and limitations of provenance studies

Main steps (middle), modification processes (right) and controlling factors (left) of sediment evolution.

During the pathway of detritus transported from source area to basin, the detritus is subject to weathering, transporting, mixing, deposition, diagenesis and recycling. The complicated process can modify parents lithology both compositionally and textually. All these factors pose certain limits on our capability to restore the characteristics of source rocks from the properties of the produced detrital record. The following paragraphs briefly introduce major problems and limitations of provenance studies.[72]

Candidate source area

To correlate sediments (detrital record) to source area, several possible source area need to be chosen for comparison. In this process, possible source area where sediment is from may be missed and not chosen as a candidate source area. This could cause misinterpretation in correlation sediment to source later.

Grain size

Grain size could cause misinterpretation of provenance studies. During transportation and deposition, detritus is subject to mechanical breakdown, chemical alternation and sorting. This always results in a preferential enrichment of specific materials in a certain range of grain-size, and sediment composition tends to be a function of grain size. For instance, SiO2/Al2O3 ratios decrease with decreasing of grain size because Al-rich phyllosilicate enriches at the expense of Si-rich phase in fine-grained detritus. This means the changing of composition of detrital record could reflect effect of sorting of grain size and not only changing of provenance.[73] To minimize the influence of sedimentary sorting on provenance method (like Sr-Nd isotopic method), only very fine-grained to fine-grained sandstones are collected as samples but medium-grained sandstones can be used when alternatives are unavailable.[74]

Mixing of detritus

Mixing of detritus from multiple sources may cause problems with correlating the final detrital record to source rocks, especially when dispersal pathways are complex and involve recycling of previously deposited sediments. For example, in a detrital record, there are zircon grains with the age of 1.0 billion years, but there are two source areas upstream that yield 1.0 billion years old zircon and rivers drained through both area. Then we couldn't determine which area the detritus is derived from.

Diagenesis

Diagenesis could be a problem when analyzing detrital records especially when dealing with ancient sediments which are always lithified.[75] Variation of clay minerals in detrital record may not reflect variation of provenance rock, but burial effect. For example, clay minerals become unstable at great depth, kaolinite and smectite become illte. If there is a downward increasing trend of illite components in a drilling core, we can not conclude that early detrital record indicate more illite-yield source rock but possibly as a result of burial and alternation of minerals[75]

Hinterland structural assumption

Structural assumption influence on provenance interpretation, left two cross sections are two hinterland structural assumptions and the right column is a foreland basin stratigraphy which shows variations of detrital record. Ma = Million year

As a provenance study tries to correlate detrital record (which is stored in basins) to hinterland stratigraphy, and hinterland stratigraphy is structurally controlled by fault systems, so hinterland structural setting is important to interpretation of the detrital record. Hinterland structural setting is estimated by field mapping work. Geologists work along river valleys and traverse mountain belts (thrust belt), locate major faults and describe major stratigraphy bounded by faults in the area. A geologic map is the product of field mapping work, and cross sections can be constructed by interpreting a geologic map. However, a lot of assumptions are made during this process, so the hinterland structural settings are always assumptions. And these assumptions can affect interpretation of detrital record. Here is an example, the right figure shows a classic thrust belt and foreland basin system, the thrust fault carries overlying rocks to the surface and rocks of various lithology are eroded and transported to deposit at the foreland basin. In structural assumption 1, the pink layer is assumed to exist above thrust 2 and thrust 3, but in the 2nd assumption, the pink layer is only carried by thrust 2. Detrital records are stored in foreland basin stratigraphy. Within the stratigraphy, the pink layer is correlated to the hinterland pink layer. If we use structural assumption 2, we can interpret that thrust 2 was active about 12 and 5 million years ago. But when using the other assumption, we couldn't know if the pink layer record indicates activity of thrust 2 or 3.

Sediment provenance studies in hydrocarbon exploration and production

A combination usage of multiple provenance methods (e.g.petrography, heavy mineral analysis, mineral geochemistry, wholerock geochemistry, geochronology and drainage capture analysis)can provide valuable insights to all stages of hydrocarbon exploration and production.[76][77] In exploration stage, provenance studies can enhance the understanding of reservoir distribution and reservoir quality. These will affect chance of success of exploration project; In development stage, mineralogical and chemical techniques are widely used to estimate reservoir zonation and correlation of stratigraphy.[78] At the same time, these provenance techniques are also used in production stage. For example, they are used to assess permeability variations and well decline rate resulting from spatial variability in diagenesis and depositional facies [76]

Also see Diagenesis and Reservoir Quality - by Schlumberger

See also

References

  1. ↑ Oxford English Dictionary. Oxford University Press.
  2. ↑ Jan Weltje and Eynatten (2004). "Quantitative provenance analysis of sediments: review and outlook". Sedimentary Geology 171: 1–11. doi:10.1016/j.sedgeo.2004.05.007.
  3. ↑ Pettijohn, F.J.; et al. Sand and sandstone. Springer. p. 553.
  4. ↑ Boggs, Sam (1992). Petrology of sedimentary Rocks.
  5. ↑ Taylor and McLennan (1995). "The Geochemical Evolution of the continental crust". Review of Geophysics 33: 241. Bibcode:1995RvGeo..33..241T. doi:10.1029/95rg00262.
  6. ↑ McLennan, S. M.; et al. (1993). "Geochemical approaches to sedimentation, provenance, and tectonics.". Geological Society of America Special Papers: 21–40. doi:10.1130/spe284-p21.
  7. 1 2 3 DeCelles P.G.; et al. (2014). "Paleocene-Eocene foreland basin evolution in the Himalaya of southern Tibet and Nepal: Implications for the age of initial India-Asia collision". Tectonics 33: 824–849. doi:10.1002/2014tc003522.
  8. ↑ Clift P.; et al. (2008). "Correlation of Himalayan exhumation rates and Asian monsoon intensity". Nature Geoscience 1: 875–880. doi:10.1038/ngeo351.
  9. 1 2 3 4 5 Dickinson and Suczek (1979). "Plate Tectonics and Sandstone Compositions". The American Association of Petroleum Geologists Bulletin 63. doi:10.1306/2f9188fb-16ce-11d7-8645000102c1865d.
  10. 1 2 3 Clift, P.D.; et al. (1996). "Constraints on the evolution of the East Greenland margin; evidence from detrital apatite in offshore sediments". Geology 24 (11): 1013–1016. doi:10.1130/0091-7613(1996)024<1013:coteot>2.3.co;2.
  11. 1 2 White, N. M.; et al. (2001). "Metamorphism and exhumation of the NW Himalaya constrained by U-Th-Pb analyses of detrital monazite grains from early foreland basin sediments". Journal of the Geological Society of London 158: 625–635. doi:10.1144/jgs.158.4.625.
  12. 1 2 3 Alizai,A.; et al. (2011). "Sediment provenance, reworking and transport processes in the Indus River by U–Pb dating of detrital zircon grains". Global and Planetary Change 76: 33–55. doi:10.1016/j.gloplacha.2010.11.008.
  13. ↑ Sun, J. (2002). "Provenance of loess material and formation of loess deposits on the Chinese Loess Plateau". EPSL 203: 845–859. doi:10.1016/s0012-821x(02)00921-4.
  14. 1 2 Hoang,L.; et al. (2009). "Evaluating the evolution of the Red River system based on in-situ U-Pb dating and Hf isotope analysis of zircons". Geochemistry Geophysics Geosystems 10. Bibcode:2009GGG....1011008V. doi:10.1029/2009gc002819.
  15. 1 2 Clift, P. D.; et al. (2012). "Evolving heavy mineral assemblages reveal changing exhumation and trench tectonics in the Mesozoic Chugach accretionary complex, South-Central Alaska". Geological Society of America Bulletin 124: 989–1006. doi:10.1130/b30594.1.
  16. 1 2 3 DeCelles; et al. (2004). "Detrital geochronology and geochemistry of Cretaceous—Early Miocene strata of Nepal: Implications for timing and diachroneity of initial Himalayan orogenesis". arth and Planetary Science Letters 277: 313–330. Bibcode:2004E&PSL.227..313D. doi:10.1016/j.epsl.2004.08.019.
  17. 1 2 3 Campbell, I. H.; et al. (2005). "He-Pb double dating of detrital zircons from the Ganges and Indus rivers; implication for quantifying sediment recycling and provenance studies". Earth Planet. Sci. Lett 237: 402–432. Bibcode:2005E&PSL.237..402C. doi:10.1016/j.epsl.2005.06.043.
  18. ↑ Haughton and Morton (1991). "Sedimentary provenance studies". From Morton, A.C., Todd, S.P. & Haughton, P.D.W. (eds) Developments in Sedimentary Provenance Studies.
  19. ↑ Krumberin and Sloss (1963). Stratigraphy and Sedimentology (2nd edition). W.H.Freeman and Co.
  20. ↑ DeCelles, P.; et al. (2014). "Paleocene-Eocene foreland basin evolution in the Himalaya of southern Tibet and Nepal: Implications for the age of initial India-Asia collision". Tectonics 33: 824–849. doi:10.1002/2014tc003522.
  21. ↑ Amato J.M.and Pavlis T.L. (2010). "Detrital zircon ages from the Chugach Terrane, southern Alaska, reveal multiple episodes of accretion and erosion in a subduction complex". Geology 38: 462. doi:10.1130/g30719.1.
  22. ↑ Clements,B.; et al. (2012). "Detrital zircon U-Pb age and Hf-isotope perspective on sediment provenance and tectonic models in SE Asia, in Rasbury, E. T., Hemming, S. R., and Riggs, N. R., eds.". Mineralogical and Geochemical Approaches to Provenance 487: 37–61. doi:10.1130/2012.2487(03).
  23. ↑ Wu, F.; et al. (2014). "Zircon U-Pb and Hf isotopic constraints on the onset time of India-Asia collision". American Journal of Science 314: 548–579. doi:10.2475/02.2014.04.
  24. ↑ Bouvier, A.; et al. (2008). "The Lu-Hf and Sm-Nd isotopic composition of CHUR: Constraints from unequilibrated chondrites and implications for the bulk composition of terrestrial planets". Earth and Planetary Science Letters 273: 48–57. Bibcode:2008E&PSL.273...48B. doi:10.1016/j.epsl.2008.06.010.
  25. ↑ Resentini,A., and Malusa, M.G. (2012). "Sediment budgets by detrital apatite fissiontrack dating (Rivers Dora Baltea and Arc, Western Alps), in Rasbury, E. T., Hemming, S. R., and Riggs, N. R., eds.". Mineralogical and Geochemical Approaches to Provenance.
  26. ↑ Emmel, B.; et al. (2006). "Detrital apatite fission-track ages in Middle Jurassic strata at the rifted margin of W Madagascar; indicator for a protracted resedimentation history". Sedimentary Geology 186 (1-2): 27–38. doi:10.1016/j.sedgeo.2005.09.022.
  27. ↑ van der Beek, P.; et al. (2006). "Late Miocene-Recent exhumation of the central Himalaya and recycling in the foreland basin assessed by apatite fission-track thermochronology of Siwalik sediments, Nepal". Basin Research 18 (4): 413–434. doi:10.1111/j.1365-2117.2006.00305.x.
  28. ↑ Hurford, A. J.; et al. (1991). "The role of fission track dating in discrimination of provenance, in Morton, A. C., Todd, S. P., and Haughton, P. D. W., eds.". Developments in Sedimentary Provenance Studies 57.
  29. ↑ Clift, P. D.; et al. (2013). "Zircon and apatite thermochronology of the Nankai Trough accretionary prism and trench, Japan: Sediment transport in an active and collisional margin setting". Tectonics 32: 377–395. doi:10.1002/tect.20033.
  30. ↑ Bernet M., and Van der Beek, P. (2006). "Miocene to Recent exhumation of the central Himalaya determined from combined detrital zircon fission-track and U/Pb analysis of Siwalik sediments, western Nepal". Basin Research 18: 393–412. doi:10.1111/j.1365-2117.2006.00303.x.
  31. 1 2 3 Goldstein, S. L.; et al. (1984). "A Sm-Nd isotopic study of atmospheric dusts and particulates from major river systems". Earth and Planetary Science Letters 70: 221–236. Bibcode:1984E&PSL..70..221G. doi:10.1016/0012-821x(84)90007-4.
  32. ↑ Limmer, D. R.; et al. (2012). "Geochemical Record of Holocene to Recent Sedimentation on the Western Indus continental shelf, Arabian Sea". Geochemistry Geophysics Geosystems 13. Bibcode:2012GGG....13.1008L. doi:10.1029/2011gc003845.
  33. 1 2 3 Limmer, D. R. (2012). "Geochemical Record of Holocene to Recent Sedimentation on the Western Indus continental shelf, Arabian Sea". Geochemistry Geophysics Geosystems 13. Bibcode:2012GGG....13.1008L. doi:10.1029/2011gc003845.
  34. 1 2 Downing, G. E. and Hemming,S.R. (2012). "Late glacial and deglacial history of ice rafting in the Labrador Sea: A perspective from radiogenic isotopes in marine sediments, in Rasbury, E. T., Hemming, S. R., and Riggs, N. R., eds.". Mineralogical and Geochemical Approaches to Provenance.
  35. ↑ Dewey, J. F. (1999). "Petrology of Ordovician and Silurian sediments in the Western Irish Caledonides: Tracers of short-lived Ordovician continent-arc collision orogeny and the evolution of the Laurentian Appalachian-Caledonian margin, in MacNiocaill, C., and Ryan, P. D., eds.". Continental tectonics 164: 55–108. doi:10.1144/gsl.sp.1999.164.01.05.
  36. ↑ Morton, A.; et al. (2012). "High-frequency fluctuations in heavy mineral assemblages from Upper Jurassic sandstones of the Piper Formation, UK North Sea: Relationships with sea-level change and floodplain residence, in Rasbury, E. T., Hemming, S. R., and Riggs, N. R., eds.". Mineralogical and Geochemical Approaches to Provenance.
  37. 1 2 3 Mange, M., and Morton, A. C. (2007). "Geochemistry of Heavy Minerals, in Mange, M., and Wright, D., eds.". Heavy Minerals in Use.
  38. ↑ Szulc, A. G.; et al. (2006). "Tectonic evolution of the Himalaya constrained by detrital 40Ar/39Ar, Sm/Nd and petrographic data from the Siwalik foreland basin succession, SW Nepal". Basin Research 18: 375–391. doi:10.1111/j.1365-2117.2006.00307.x.
  39. ↑ Hoang, L. V.; et al. (2010). "Ar-Ar Muscovite dating as a constraint on sediment provenance and erosion processes in the Red and Yangtze River systems, SE Asia". Earth and Planetary Science Letters 295: 379–389. Bibcode:2010E&PSL.295..379V. doi:10.1016/j.epsl.2010.04.012.
  40. ↑ Foster, G. L., and Carter, A. (2007). "Insights into the patterns and locations of erosion in the Himalaya - A combined fission-track and in situ Sm-Nd isotopic study of detrital apatite". Earth and Planetary Science Letters 257: 407–418. Bibcode:2007E&PSL.257..407F. doi:10.1016/j.epsl.2007.02.044.
  41. ↑ Lee, J. I.; et al. "Sediment flux in the modern Indus River inferred from the trace element composition of detrital amphibole grains". Sedimentary Geology 160: 243–257. doi:10.1016/s0037-0738(02)00378-0.
  42. ↑ Gwiazda, R. H.; et al. (1996). "Tracking the sources of icebergs with lead isotopes; the provenance of ice-rafted debris in Heinrich layer 2". Paleoceanography 11: 79–93. Bibcode:1996PalOc..11...77G. doi:10.1029/95pa03135.
  43. ↑ Liu, Z.; et al. (2010). "Clay mineral distribution in surface sediments of the northeastern South China Sea and surrounding fluvial drainage basins: Source and transport". Marine Geology 277: 48–60. doi:10.1016/j.margeo.2010.08.010.
  44. ↑ Preston, J. (1998). "Integrated whole-rock trace element geochemistry and heavy mineral chemistry studies; aids to the correlation of continental red-bed reservoirs in the Beryl Field, UK North Sea". Petroleum Geoscience 4: 7–16. doi:10.1144/petgeo.4.1.7.
  45. ↑ McAteer, C.A.; et al. (2010). "Detrital zircon, detrital titanite and igneous clast U–Pb geochronology and basement–cover relationships of the Colonsay Group, SW Scotland: Laurentian provenance and correlation with the Neoproterozoic Dalradian Supergroup". Precambrian Research 181: 21–42. doi:10.1016/j.precamres.2010.05.013.
  46. ↑ Hoskin, P. W. O., and Ireland, T. R. (2000). "Rare earth element chemistry of zircon and its use as a provenance indicator". Geology 28: 627–630. doi:10.1130/0091-7613(2000)28<627:reecoz>2.0.co;2.
  47. ↑ Weber, M.; et al. (2010). "U/Pb detrital zircon provenance from late cretaceous metamorphic units of the Guajira Peninsula, Colombia: Tectonic implications on the collision between the Caribbean arc and the South American margin". Journal of South American Earth Sciences 29: 805–816. doi:10.1016/j.jsames.2009.10.004.
  48. ↑ Nardi, L. V. S.; et al. (2013). "Zircon/rock partition coefficients of REEs, Y, Th, U, Nb, and Ta in granitic rocks: Uses for provenance and mineral exploration purposes". Chemical Geology 335: 1–7. doi:10.1016/j.chemgeo.2012.10.043.
  49. ↑ Batten, D. J. (1991). "Reworking of plant microfossils and sedimentary provenance, in Morton, A. C., Todd, S. P., and Haughton, P. D. W., eds., Developments in Sedimentary Provenance Studies". Geological Society, London, Special Publications 57: 79–90. doi:10.1144/gsl.sp.1991.057.01.08.
  50. ↑ Spiegler, D. (1989). "ice-rafted Cretaceous and Tertiary fossils in Pleistocene-Pliocene sediments, ODP Leg 104, Norwegian Sea". Proc. ODP, Sci Res. 104: 739–744. doi:10.2973/odp.proc.sr.104.197.1989.
  51. ↑ VanLaningham, S.; et al. (2006). "Erosion by rivers and transport pathways in the ocean: A provenance tool using 40Ar-39Ar incremental heating on fine-grained sediment". Journal of Geophysical Research 111. Bibcode:2006JGRF..111.4014V. doi:10.1029/2006jf000583.
  52. ↑ VanLaningham, S.; et al. (2009). "Glacial-interglacial sediment transport to the Meiji Drift, Northwest Pacific Ocean: evidence for timing of Beringian outwashing". Earth and Planetary Science Letters 277: 64–72. Bibcode:2009E&PSL.277...64V. doi:10.1016/j.epsl.2008.09.033.
  53. ↑ Sun, Y.; et al. (2013). "ESR signal intensity and crystallinity of quartz from Gobi and sandy deserts in East Asia and implication for tracing Asian dust provenance". Geochemistry, Geophysics, Geosystems 14 (8): 2615–2627. doi:10.1002/ggge.20162.
  54. ↑ Shimada, A.; et al. (2013). "Characteristics of ESR signals and TLCLs of quartz included in various source rocks and sediments in Japan : a clue to sediment provenance". Geochronometria 40: 334–340. doi:10.2478/s13386-013-0111-z.
  55. ↑ Hatfield, R.G.; et al. (2013). "Source as a controlling factor on the quality and interpretation of sediment magnetic records from the northern North Atlantic". Earth Planet. Sci. Lett. 368: 69–77. Bibcode:2013E&PSL.368...69H. doi:10.1016/j.epsl.2013.03.001.
  56. ↑ Brachfeld, S.; et al. (2013). "ron oxide tracers of ice sheet extent and sediment provenance in the ANDRILL AND-1B drill core, Ross Sea, Antarctica.". Global and Planetary Change 110: 420–433. doi:10.1016/j.gloplacha.2013.09.015.
  57. ↑ White, N.M.; et al. (2002). "Constraints on the exhumation and erosion of the High Himalayan Slab, NW India, from foreland basin deposits". Earth and Planetary Science Letters 195: 29–44. doi:10.1016/s0012-821x(01)00565-9.
  58. ↑ Dickinson, W.R., and Gehrels, G.E. (2008). "Sediment delivery to the Cordilleran foreland basin: Insights from U-Pb ages of detrital zircons in Upper Jurassic and Cretaceous strata of the Colorado Plateau". American Journal of Science 308.
  59. ↑ Dickinson, W.R., and Gehrels, G.E. (2009a). "Insights into North American paleogeography and paleotectonics from U–Pb ages of detrital zircons in Mesozoic strata of the Colorado Plateau, USA". International Journal of Earth Sciences 99: 1247–1265. doi:10.1007/s00531-009-0462-0.
  60. ↑ Dickinson, W.R., and Gehrels, G.E. (2009b). "U-Pb ages of detrital zircons in Jurassic eolian and associated sandstones of the Colorado Plateau: Evidence for transcontinental dispersal and intraregional recycling of sediment". Geological Society of America Bulletin 121: 408–433. doi:10.1130/b26406.1.
  61. ↑ Carrapa B. (2010). "Resolving tectonic problems by dating detrital minerals". Geology 38: 191–192. doi:10.1130/focus022010.1.
  62. 1 2 White, W. M. (2009). Geochemisty. Wiley-Blackwell.
  63. ↑ Nelson B.K. and DePaolo D. J. (1988). "COMPARISON OF ISOTOPIC AND PETROGRAPHIC PROVENANCE INDICATORS IN SEDIMENTS FROM TERTIARY CONTINENTAL BASINS OF NEW MEXICO". JOUm~AL OF SEDIMENTARY PETROLOGY 58.
  64. 1 2 DePalo and Wasserburg (1976). "Nd ISOTOPIC VARIATIONS and PETROGENETIC MODELS". Geophysical Research Letters 3: 249–252. Bibcode:1976GeoRL...3..249D. doi:10.1029/gl003i005p00249.
  65. ↑ Palmer and Edmond (1992). "Controls over the strontium isotope composition of river water". Geochim. Cosmochim. Acta 56: 2099–2111. doi:10.1016/0016-7037(92)90332-d.
  66. ↑ Clift and Blusztajn (2005). "Reorganization of the western Himalayan river system after five million years ago". Nature 438: 1001–1003. doi:10.1038/nature04379. PMID 16355221.
  67. ↑ Cuthbert, S.J. (1991). "Evolution of the Devonian Hornelen basin, west Norway: new constraints from petrological studies of metamorphic clasts. In: Morton, A.C., Todd, S.P., Haughton, P.D.W. (Eds.), Developments in Sedimentary Provenance Studies". Geol. Soc. Lond. Spec. Publ 57: 343–360. doi:10.1144/gsl.sp.1991.057.01.25.
  68. ↑ Lihou, J.C., Mange-Rajetzky, M.A. (1996). "Provenance of the Sardona flysch, eastern Swiss Alps: example of high-resolution heavy mineral analysis applied to an ultrastable assemblage. Sediment". Geology 105: 141–157. doi:10.1016/0037-0738(95)00147-6.
  69. ↑ Dunkl, I., Di Gulio, A., Kuhlemann, J. (2001). "Combination of single-grain fission-track geochronology and morphological analysis of detrital zircon crystals in provenance studies— sources of the Macigno formation (Apennines, Italy)". Journal of Sedimentary Research 71: 516–525. doi:10.1306/102900710516.
  70. ↑ Morton, A.C. (1991). "Geochemical studies of detrital heavy minerals and their application to provenance research. In: Morton, A.C.Kronz, A., Haughton, P.D.W. (Eds.), Developments in Sedimentary Provenance Studies.". Geol. Soc. Lond. Spec. Publ 57: 31–45. doi:10.1144/gsl.sp.1991.057.01.04.
  71. ↑ von Eynatten, H., Wijbrans, J.R. (2003). "Precise tracing of exhumation and provenance using Ar/Ar-geochronology of detrital white mica: the example of the Central Alps.". Geol. Soc. London, Spec. Publ. 208: 289–305. doi:10.1144/gsl.sp.2003.208.01.14.
  72. ↑ Mark J. Johnsson; Abhijit Basu (1 January 1993). Processes Controlling the Composition of Clastic Sediments. Geological Society of America. ISBN 978-0-8137-2284-9.
  73. ↑ Ingersoll; et al. (1984). "The effect of grain size on detrital mode: a test of the Gazzi-Dickinson point-counting method". Journal of sedimentary petrology.
  74. ↑ Najman et al 2000 (2000). "Early Himalayan exhumation: Isotopic constraints from the Indian foreland basin". Terra Nova 12: 28–34. doi:10.1046/j.1365-3121.2000.00268.x.
  75. 1 2 Giles, M. R. (1997). "Diagenesis: A Quantitative Perspective— Implications for Basin Modelling and Rock Property Prediction". Kluwer Academic Publishing.
  76. 1 2 SMYTH, H.; et al. (2012). "Sediment provenance studies in hydrocarbon exploration and production: an introduction". From:Scott, R. A., Smyth, H. R., Morton,A.C.&Richardson, N. (eds) Sediment Provenance Studies in Hydrocarbon Exploration and Production. Geological Society, London, Special Publications, 386 386: 1–6. doi:10.1144/sp386.21.
  77. ↑ R.A. Scott, H.R. Smyth, A.C. Morton, N. Richardson. Sediment Provenance Studies in Hydrocarbon Exploration and Production. Geological Society Special Publication.
  78. ↑ Lee, M.R.; et al. (2003). "Peristeritic plagioclase in North Sea hydrocarbon reservoir rocks: Implications for diagenesis, provenance and stratigraphic correlation". American Mineralogist 88: 866–875. doi:10.2138/am-2003-5-616.

External links

This article is issued from Wikipedia - version of the Thursday, April 21, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.