Prussian P 2

The Prussian Class P 2 consisted of various types of early, passenger train, steam locomotive operated by the Prussian state railways. There were 294 2-4-0 locomotives, 24 0-4-2 locomotives and two engines with a 4-4-0 wheel arrangement. Of the 2-4-0 type, 88 came from railway companies that were the predecessors to the Prussian state railways and did not comply with Prussian norms, 24 were of the Ruhr-Sieg type (see Prussian P 1) and 182 were standard P 2's. The 0-4-2 locomotives were identical with the Prussian G 2.

P 2 (older standard type)

Prussian P 2
Quantity 242
Year(s) of manufacture 1877–1885
Wheel arrangement 2-4-0
Axle arrangement 1B
Gauge 1,435 mm
Length over buffers 14,823
Service weight 38.0 t
Adhesive weight 25.1 t
Axle load 10.2 t
Top speed 70–90 km/h
Driving wheel diameter 1,580 mm
Leading wheel diameter 980 mm
Cylinder bore 420 mm
Piston stroke 600 mm
Boiler Overpressure 10 bar
Grate area 1.73 m²
Evaporative heating area 95.36 m²
Tender pr 3 T 10.5
Water capacity 10.5 m³

Between 1877 and 1885 a total of 242 locomotives of the standard P 2 class were delivered to the Prussian state railways and its forebears. The engines were initially intended for services on the so-called Cannons Railway (Kanonenbahn) from Berlin to Wetzlar and Metz. Later they were also employed on other routes in express and passenger train service. When locomotives were reclassified in 1906, 17 units were allocated to Class P 1, 182 to Class P 2 and 7 to Class P 3. The rest had already been retired by that time.

The Royal Prussian Military Railway (Königlich Preussische Militär-Eisenbahn) also had a P 2. Sever were built for the Neustrelitz-Warnemünde Railway (Neustrelitz-Warnemünder Eisenbahn) in Mecklenburg and six for the Grand Duchy of Mecklenburg Friedrich-Franz Railway (see Mecklenburg P 2). The Lübeck-Büchen Railway had 9 P 2's in its fleet; however these were smaller and less powerful than their Prussian cousins.

The vehicles were equipped with a Crampton boiler, inside valve gear of the template (Musterblatt) 15 type (158 units) or outside valve gear of the template 16 type (84 units). They were coupled with tenders of Class 3 T 10.5.

Although they proved very reliable, all the machines were retired by the First World War. Only four P 2's from Mecklenburg made it into the DRG's provisional renumbering plan in 1923 as nos. 34 7201 - 7204.

P 2 (Rhenish Railway)

P 2 (Rhenish Railway)
Quantity 12
Year(s) of manufacture 1879, 1886
Retired by 1906
Wheel arrangement 4-4-0
Axle arrangement 2'B
Gauge 1,435 mm
Length over buffers 14,125 mm
Service weight 36.5 t
Adhesive weight 24.8 t
Axle load 12.4 t
Driving wheel diameter 1,708 mm
Leading wheel diameter 905 mm
Cylinder bore 432 mm
Piston stroke 610 mm
Boiler Overpressure 10 bar
Grate area 1.70 m²
Evaporative heating area 85.7 m²
Tender pr 2 T 7
Water capacity 7 m³
Fuel 3.5 t coal

The Rhenish Railway Company (Rheinische Eisenbahn-Gesellschaft) procured seven 4-4-0 locomotives for use in express and passenger train service on the winding Cologne - Euskirchen - Trier route. These were the first 4-4-0 locomotives in Prussia. The movable, leading bogie meant that the wear and tear on the wheel flanges was not as severe as that on locomotives with fixed carrying axles. The first seven locomotives bought from Vulcan in 1879 were followed by a further 5 from Hanomage in 1886 delivered to Cologne West (Cöln linksrheinisch) railway division. These engines were subsequently transferred to the Saarbrücken division, two being reclassified as P 2 Saarbrücken, nos. 1567 and 1568, but were retired by 1906.

See also

Sources

This article is issued from Wikipedia - version of the Sunday, December 07, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.