Quantum tunnelling composite

Quantum tunnelling composites (or QTCs) are composite materials of metals and non-conducting elastomeric binder, used as pressure sensors. They utilise quantum tunnelling: without pressure, the conductive elements are too far apart to conduct electricity; when pressure is applied, they move closer and electrons can tunnel through the insulator. The effect is far more pronounced than would be expected from classical (non-quantum) effects alone, as classical electrical resistance is linear (proportional to distance), while quantum tunnelling is exponential with decreasing distance, allowing the resistance to change by a factor of up to 1012 between pressured and unpressured states.[1]

Introduction

[2] QTCs were discovered in 1996 by technician David Lussey while he was searching for a way to develop an electrically conductive adhesive. Lussey founded Peratech Ltd, a company devoted to research work and usage of QTCs. Peratech Ltd. and other companies are working on developing quantum tunneling composite to improve touch technology. Currently, there is restricted use of QTC due to its high cost, but eventually this technology will become available to the general user. Quantum tunneling composites are combinations of polymer composites with elastic, rubber-like properties elastomer, and metal particles (nickel)l. Due to a no-air gap in the sensor, contamination or interference between the contact points is impossible. There is also little to no chance of arcing, electrical sparks between contact points. In the QTC's inactive state, the conductive elements are too far from one another to pass electron charges. Thus, current does not flow when there is no pressure on the quantum-tunneling composite. A characterization of a QTC is its spiky silicon covered surface. The spikes do not actually touch, but when a force is applied to the QTC, the spikes move closer to each other and a [quantum] effect occurs as a high concentration of electrons flow from one spike tip to the next. The electric current stops when the force is taken away. [3]

Types

QTCs come in different forms and each form is used differently but has similar resistance change when deformed. QTC pills are the most commonly used type of QTC. Pills are pressure sensitive variable resistors. The amount of pressure applied is proportionate to the amount of electric current passed. QTC pills can be used as input sensors which respond to an applied force. These pills can also be used in devices to control higher currents than those of QTC sheets. Another form of QTC are sheets. These sheets are composed of three layers: a thin layer of QTC material, a conductive material and a plastic insulator. QTC sheets allow a quick switch from high to low resistance and vice versa.[4]

Applications

In February 2008 the newly formed company QIO Systems Inc[5] gained, in a deal with Peratech, the worldwide exclusive license to the intellectual property and design rights for the electronics and textile touchpads based on QTC technology[6] and for the manufacture and sale of ElekTex (QTC-based) textile touchpads for use in both consumer and commercial applications.[7]

QTCs were used to provide fingertip sensitivity in NASA's Robonaut in 2012. Robonaut was able to survive and send detailed feedback from space. The sensors on the human-like robot were able to tell how hard and where it was gripping something. [8]

Quantum tunneling composites are relatively new and are still being researched and developed. QTC has been implemented within clothing to make “smart”, touchable membrane control panels to control electronic devices within clothing, e.g. mp3 players or mobile phones. This allows equipment to be operated without removing clothing layers or opening fastenings and makes standard equipment usable in extreme weather or environmental conditions such as Arctic/Antarctic exploration or spacesuits.


The following are possible uses of QTCs:

References

  1. D. Bloor, A. Graham, E. J. Williams, P. J. Laughlin, and D. Lussey (2006). "Metal–polymer composite with nanostructured filler particles and amplified physical properties". Applied Physics Letters 88: 102103. Bibcode:2006ApPhL..88j2103B. doi:10.1063/1.2183359.
  2. http://www.peratech.com/qtc-material.html
  3. Lussey, David (January 2012). "Quantum-Tunneling Composite Touch-Screen Technology". Retrieved 30 October 2014.
  4. Ramesh, K Satya. "Quantum Tunneling Composite". Kakinada Institue of Engineering & Technology.
  5. http://www.qiosystems.com
  6. http://www.eleksen.com/?page=news/index.asp&newsID=84
  7. Eleksen gets a new home by QIO Systems - John Collins, Vassilis Seferidis, Systems, Eleksen, Eleksen’s, eSystem, ElekTex, Collins, Vassilis, Interactive - talk2myShirt
  8. "Peratech presented with award by NASA for its QTC touch technology". 15 October 2012. Retrieved 10 November 2014.
  9. Kharbanda, Rajat (1 December 2012). "Quantum Tunneling Composites(QTC):The Next Generation Touch Material". CMR. Retrieved 5 November 2014.
This article is issued from Wikipedia - version of the Wednesday, October 21, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.