Rassvet (ISS module)

Rassvet

Rassvet as seen from the Cupola module during STS-132 with a Progress in the lower right
Station statistics
Launch date: May 14, 2010
Launch vehicle: Space Shuttle Atlantis
Permanently docked: May 18
Undocked: N/A
Reentry: 2020+
Mass: 5,075 kg
Diameter: 2.35m
Living volume:

Total:17.4 m3

Pressurized:5.85m3
The Russian Orbital Segment as seen from the departing STS-135 in July 2011 with (clockwise from left) a Russian Progress unmanned vehicle, two Soyuz manned spacecraft, and an additional Progress vehicle currently docked.

Rassvet (Russian: Рассве́т; lit. "dawn"), also known as the Mini-Research Module 1 (MRM-1) (Russian: Малый исследовательский модуль, МИМ 1) and formerly known as the Docking Cargo Module (DCM), is a component of the International Space Station (ISS). The module's design is similar to the Mir Docking Module launched on STS-74 in 1995. Rassvet is primarily used for cargo storage and as a docking port for visiting spacecraft. It was flown to the ISS aboard Space Shuttle Atlantis on the STS-132 mission on May 14, 2010,[1] and was connected to the ISS on May 18.[2] The hatch connecting Rassvet with the ISS was first opened on May 20.[3] On 28 June 2010, the Soyuz TMA-19 spacecraft performed the first docking with the module.[4]

Details

Rassvet in the Space Station Processing Facility (SSPF) at Kennedy Space Center in Florida.
An interior view of Rassvet.

Rassvet was docked to the nadir port of Zarya with help from the SSRMS.[5] Rassvet carried externally attached outfitting equipment from NASA for the Nauka Multipurpose Laboratory Module (MLM), a spare elbow joint for the European Robotic Arm, and a radiator. Delivering Rassvet thus enabled NASA to fulfill its promise to ship 1.4 metric tons to equip the MLM.[6]

Rassvet has two docking units: one to attach to the nadir port of the Zarya module, and one to provide a docking port for a Soyuz or Progress spacecraft. It implements the role of the Docking and Stowage Module from the original ISS design. Russia announced the cancellation of the last of the two planned Russian Research Modules when it announced the plans for Rassvet.

Initial planning

The initial ISS plan included a Docking and Storage Module (DSM). This planned Russian element was intended to provide facilities for stowage and an additional docking port, and would have been launched to the station on a Proton launch vehicle. The DSM would have been mounted to Zarya's nadir (Earth-facing) docking port. It would have been similar in size and shape to the Zarya module.

The DSM was cancelled due to Russian budgetary constraints for some time, but its design was eventually modified into the Docking and Cargo Module (Rassvet) that was to be connected to the same Zarya location to provide stowage space and a docking port. During the cancellation period, it was proposed that a Multi Purpose Module (MPM) called Enterprise should be docked to Zarya, and later the Multipurpose Laboratory Module (MLM) was proposed to be located there as well, but the Enterprise module has since been cancelled and the MLM will be docked to Zvezda's nadir port instead.

Purpose

Rassvet was designed as a solution to two problems facing the ISS partners:

  1. NASA was under contract to carry the MLM outfitting equipment into space.
  2. The overlapping missions of the Progress, Soyuz, and ATV spacecraft highlighted the need to have four Russian docking ports available on the ISS. The cancellation of both Russian Research Modules meant that the ISS would be left with just three such docking ports after the installation of the Permanent Multipurpose Module in 2011, which made the nadir port of Zarya unusable.

Rassvet solved both of these issues. NASA did not need to add another payload flight to accommodate the MLM outfitting equipment, as it could attach the hardware to the exterior of MRM-1. The ISS now had 4 docking ports available on the Russian segment: the aft port of Zvezda, the port of Pirs, later MLM (on the nadir port of Zvezda), the port of MRM-2 (on the zenith port of Zvezda), and the port on MRM-1 (on the nadir port of Zarya). Russia's cancellation of the Research Module thus came to be of less consequence for the ISS program as a whole.

Design and construction

The Experiment Airlock on the Rassvet module.

The module was designed and built by S.P. Korolev RSC Energia, from the already-made pressurized hull of the mock-up for dynamic tests of the canceled Science Power Platform.[7][8]

On December 17, 2009, an Antonov An-124 carrying the Rassvet Module and ground process equipment arrived at the Kennedy Space Center in Florida.[9] Upon unloading, the equipment was delivered to a prelaunch processing facility run by the Astrotech. Energia specialists and technicians continued their work on the processing of the Rassvet module at the facility, completing stand-alone electrical tests and leak tests of the module and the airlock. They also prepared the airlock and the radiative heat exchanger for installation onto Rassvet. The module was moved to NASA's Space Station Processing Facility on April 2, 2010. After completing the final touches, it was placed into the shuttle payload transporter on April 5, 2010. The payload canister containing the Rassvet Module arrived at Launch Pad 39A on April 15, 2010.[10]

Engineers at Launch Pad 39A preparing Space Shuttle Atlantis had noticed paint peeling from the MRM-1 module. Although the problem was declared to have no impact on the operation of Rassvet, it posed a potential threat of releasing debris on orbit.[11]

Specifications

The Soyuz TMA-19 spacecraft docks to the Rassvet Mini-Research Module 1.

Source: [12]

Module launch mass 5,075 kg
Total Launch mass 8,015 kg
Maximum hull diameter 2.35 m
Hull length between docking assembly planes 6 m
Pressurized volume 17.4 m3
Habitable volume 5.85 m3

Visited spacecraft

Rassvet was connected to nadir port of Zarya on May 18, 2010.[2]

PatchSpacecraft Docking Undocking
Soyuz TMA-19 28 June 2010
03:38 UTC
26 November 2010
01:23 UTC
Soyuz TMA-20 17 December 2010
20:12 UTC
23 May 2011
21:35 UTC
Soyuz TMA-02M 9 June 2011
21:18 UTC
21 November 2011
23:00 UTC
Soyuz TMA-03M 23 December 2011
15:19 UTC
1 July 2012
04:48 UTC
Soyuz TMA-05M 17 July 2012
04:51 UTC
18 November 2012
22:26 UTC
Soyuz TMA-07M 21 December 2012
14:09 UTC
13 May 2013
23:08 UTC
Soyuz TMA-09M 29 May 2013
02:10 UTC
1 November 2013
Soyuz TMA-11M 7 November 2013
10:27 UTC
13 May 2014
22:36 UTC
Soyuz TMA-13M 29 May 2014
19:57 UTC
10 November 2014
00:31 UTC
Soyuz TMA-15M 23 November 2014
01:01 UTC
11 June 2015
10:20 UTC
Soyuz TMA-17M 23 July 2015
02:45 UTC
11 December 2015
09:49 UTC
Soyuz TMA-19M 15 December 2015
17:33 UTC

Gallery

See also

References

  1. Chris Gebhardt (9 April 2009). "STS-132: PRCB baselines Atlantis' mission to deliver Russia’s MRM-1". NASAspaceflight.com. Retrieved 12 November 2009.
  2. 1 2 NASA (May 18, 2010). "STS-132 MCC Status Report #09". Retrieved July 7, 2010.
  3. NASA (May 20, 2010). "STS-132 MCC Status Report #13". Retrieved July 7, 2010.
  4. Justin Ray (June 28, 2010). "Station crew takes Soyuz for 'spin around the block'". SpaceFlight Now. Retrieved July 7, 2010.
  5. "MRM-1 for ISS". NASAspaceflight.com. 11 April 2007. Retrieved 5 December 2012.
  6. "NASA Extends Contract With Russia’s Federal Space Agency". NASA.
  7. NASA оплатило полёты своих астронавтов до 2011 года Novosti Kosmonavtiki №2007/6
  8. Justin Ray (March 25, 2010). "Russian space module set for American launch aboard the shuttle Atlantis". Spaceflight Now. Retrieved March 31, 2010.
  9. "Mini-Research Module MRM1 At Cape For Shuttle Processing". December 30, 2009. Retrieved March 6, 2010.
  10. Justin Ray (April 15, 2010). "Russian space station module shipped to NASA's space shuttle launch pad". Spaceflightnow. Retrieved April 25, 2010.
  11. Chris Bergin (April 28, 2010). "STS-132: Managers work through SSP FRR – Will slip launch date if required". NASAspaceflight.com. Retrieved April 29, 2010.
  12. "Space Shuttle Mission STS 132 PRESS KIT" (PDF). NASA. May 2010. Retrieved 2010-05-10.

External links

This article is issued from Wikipedia - version of the Tuesday, March 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.