Backup camera

Backup camera view on the navigation screen of a Lexus IS 250
Backup camera on Volkswagen Golf Mk7

A backup camera (also called reversing camera) is a special type of video camera that is produced specifically for the purpose of being attached to the rear of a vehicle to aid in backing up, and to alleviate the rear blind spot. Backup cameras are alternatively known as 'reversing cameras' or 'rear view cameras'. It is specifically designed to avoid a Backup collision. The area directly behind vehicles has been described as a "killing zone" due to the associated carnage.[1]

Backup cameras are usually connected to the vehicle head unit display.

The design of a backup camera is distinct from other cameras in that the image is horizontally flipped so that the output is a mirror image. This is necessary because the camera and the driver face opposite directions, and without it, the camera's right would be on the driver's left and vice versa. A mirrored image makes the orientation of the display consistent with the physical mirrors installed on the vehicle. A backup camera typically sports a wide-angle or fisheye lens. While such a lens spoils the camera's ability to see faraway objects, it allows the camera to see an uninterrupted horizontal path from one rear corner to the other. The camera is typically pointed on a downward angle, to view potential obstacles on the ground as well as the position of approaching walls and docks, rather than straight back.

Backup cameras are common on vehicles that tow difficult-to-see trailers, such as motorhomes. Recently, with the rise in popularity of in-dash DVD players and GPS navigation systems which aid in justifying the expense of adding a color LCD to the driver's seat, they have become much more common, often available as optional factory accessories on standard passenger trucks and sport utility vehicles, as well as aftermarket accessories. Inside the vehicle, the display is typically wired to automatically sense when the transmission is set in reverse, showing the backup view while in reverse, and showing the map (or other content) at all other times.

Variations

Backup cameras are produced in different varieties depending on the application.

Others

Other types of camera systems can give a more comprehensive view. In 2007 Nissan introduced their "Around View Monitor" which uses four cameras to give a birds eye view of the vehicle.[2][3] Other automobile manufactures have since offered similar systems, BMW introduced their system in 2009 on the F10 5-series.

Blind spot monitors and other technology

Blind spot monitors are an option that may include more than monitoring the sides of the vehicle. It can include "Cross Traffic Alert," "which alerts drivers backing out of a parking space when traffic is approaching from the sides."[4][5][6]

Examples

The first back up camera was used in the 1956 Buick Centurion concept car, presented in January 1956 at the General Motors Motorama. The vehicle had a rear mounted television camera that sent images to a TV screen in the dashboard in place of the rear-view mirror.[7] The first production automobile to incorporate a back up camera was the 1991 Toyota Soarer Limited (UZZ31 & UZZ32), which was only available in Japan and not on its U.S. counterpart, the Lexus SC. The Toyota system used a colour EMV screen, with a rear spoiler mounted CCD camera. The system was discontinued in 1997. In April 2000, Nissan's Infiniti luxury division introduced the RearView Monitor on the 2002 Q45 flagship sedan at the 2000 New York International Auto Show. Introducing coloured onscreen guide lines as a parking distance parameter, the RearView Monitor operated from a license-plate mounted camera in the trunk, that transmitted a mirrored image to an in-dash (7 inch) LCD screen. It was available as optional equipment upon North American market launch in March 2001.[8][9] The 2002 Nissan Primera introduced the RearView Monitor back up camera system to territories outside Japan and North America.

Law

In the United States, the Cameron Gulbransen Kids Transportation Safety Act of 2007[10] required the federal Secretary of Transportation to issue backup collision safety regulations within 3 years and require full compliance within 4 years after final rulemaking. As of 2012, regulations are still under study.[11] About half of model year 2012 automobiles already have backup cameras installed.[11]

The Cameron Gulbransen Kids Transportation Safety Act was passed to mandate increased rear visibility on automobiles sold in the United States, it has been delayed by the NHTSA on four separate occasions. NHTSA estimates the cost at $58 to $203 depending on whether the vehicle already comes standard with an interior display. Consumers Union filed a lawsuit in September 2013 to force action, saying the NHTSA has delayed the laws implementation excessively.

In March 2014, the National Highway Traffic Safety Administration announced that it would require all new automobiles to have backup cameras by 2018.[12] Manufacturers are petitioning that backup cameras replace mirrors to reduce drag and improve fuel economy of their vehicles.[13]

See also

Notes

14. The benefits of backup cameras for Fleets and side-facing backup cameras.

External links

Wikimedia Commons has media related to Backup camera.

The benefits of Backup Cameras for Fleets and side-facing backup cameras.

This article is issued from Wikipedia - version of the Saturday, March 26, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.