Register window

Example of a 4-window register window system

In computer engineering, the use of register windows is a technique to improve the performance of a particularly common operation, the procedure call. This was one of the main design features of the original Berkeley RISC design, which would later be commercialized as the SPARC, AMD Am29000, and Intel i960.

Abstract

Most CPU designs include a small amount of very high-speed memory known as registers. Registers are used by the CPU in order to hold temporary values while working on longer strings of instructions. Considerable performance can be added to a design with more registers. However, since the registers are a visible piece of the CPU's instruction set, the number cannot typically be changed after the design has been released.

While registers are almost a universal solution to performance, they do have a drawback. Different parts of a computer program all use their own temporary values, and therefore compete for the use of the registers. Since a good understanding of the nature of program flow at runtime is very difficult, there is no easy way for the developer to know in advance how many registers they should use, and how many to leave aside for other parts of the program. In general these sorts of considerations are ignored, and the developers, and more likely, the compilers they use, attempt to use all the registers visible to them. In the case of processors with very few registers to begin with, this is also the only reasonable course of action.

Implementation

Register windows aim to solve this issue. Since every part of a program wants registers for its own use, several sets of registers are provided for the different parts of the program. If these registers were visible, there would be more registers to compete over, i.e. they have to be made invisible.

Rendering the registers invisible can be implemented efficiently; the CPU recognizes the movement from one part of the program to another during a procedure call. It is accomplished by one of a small number of instructions (prologue) and ends with one of a similarly small set (epilogue). In the Berkeley design, these calls would cause a new set of registers to be "swapped in" at that point, or marked as "dead" (or "reusable") when the call ends.

Application in CPUs

In the Berkeley RISC design, only eight registers out of a total of 64 are visible to the programs. The complete set of registers are known as the register file, and any particular set of eight as a window. The file allows up to eight procedure calls to have their own register sets. As long as the program does not call down chains longer than eight calls deep, the registers never have to be spilled, i.e. saved out to main memory or cache which is a slow process compared to register access. For many programs a chain of six is as deep as the program will go.

By comparison, the Sun Microsystems SPARC architecture provides simultaneous visibility into four sets of eight registers each. Three sets of eight registers each are "windowed". Eight registers (i0 through i7) form the input registers to the current procedure level. Eight registers (L0 through L7) are local to the current procedure level, and eight registers (o0 through o7) are the outputs from the current procedure level to the next level called. When a procedure is called, the register window shifts by sixteen registers, hiding the old input registers and old local registers and making the old output registers the new input registers. The common registers (old output registers and new input registers) are used for parameter passing. Finally, eight registers (g0 through g7) are globally visible to all procedure levels.

The AMD 29000 improved the design by allowing the windows to be of variable size, which helps utilization in the common case where fewer than eight registers are needed for a call. It also separated the registers into a global set of 64, and an additional 128 for the windows.

Register windows also provide an easy upgrade path. Since the additional registers are invisible to the programs, additional windows can be added at any time. For instance, the use of object-oriented programming often results in a greater number of "smaller" calls, which can be accommodated by increasing the windows from eight to sixteen for instance. This was the approach used in the SPARC, which has included more register windows with newer generations of the architecture. The end result is fewer slow register window spill and fill operations because the register windows overflow less often.

Criticism

Register windows are not the only way to improve register performance. The group at Stanford University designing the MIPS architecture saw the Berkeley work and decided that the problem was not a shortage of registers, but poor utilization of the existing ones. They instead invested more time in their compiler's register allocation, making sure it wisely used the larger set available in the MIPS instruction set. This resulted in reduced complexity of the chip, with one half the total number of registers, while offering potentially higher performance in those cases where a single procedure could make use of the larger visible register space. In the end, with modern compilers, the MIPS design makes better use of its register space even during procedure calls.

See also

References

This article is issued from Wikipedia - version of the Thursday, July 24, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.