Murphy Renegade

Renegade
Renegade II
Role Kit aircraft
National origin Canada
Manufacturer Murphy Aircraft
Designer Darryl Murphy
Produced 1984-present
Number built 590 (2011)[1]


Renegade Spirit with Rotax 618 engine

The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.[1][2][3][4][5][6]

In Canada all Renegade variants are eligible to be registered as amateur-builts, basic ultralights or advanced ultralights. In the USA the Renegade is not on the list of Special light-sport aircraft, but is eligible for the Experimental - Amateur-built category.[7][8][9]

Development

The Renegade was designed as the result of an accident. Darryl Murphy is a mechanical engineering technologist who designed and built a rigid wing hang glider in 1978 as a school project while attending the Saskatchewan Institute of Applied Science and Technology in Saskatoon, Saskatchewan. In 1984 Murphy was in a non-aviation accident that left him hospitalized for four months. During his recovery time he decided to design a biplane to fit into the then-new Canadian ultralight category. The resulting aircraft, C-IDJY, is a single-seat model and was intended as a one-off aircraft for his own use, with no production intentions. Murphy named it the Renegade.[10]

After taking the aircraft to a number of fly-ins and other aviation events, Murphy was encouraged by the large number of people who wanted him to build one for them. In 1985 he quit his job and started Murphy Aviation (later renamed Murphy Aircraft Manufacturing), with his brother Bryan and located the company in Chilliwack, British Columbia. The original Renegade design was turned into a two-seater by relocating the fuel tank from the centre fuselage to the upper wing, installing a second seat and designating it Renegade II. Initial sales were disappointing as only one kit was sold in the first six months. Sales improved greatly once the aviation press began reviewing the aircraft. By 1986 the company had a backlog of orders, including many from outside North America. Murphy displayed the Renegade at the EAA Convention, Oshkosh and returned to Chilliwack with a substantial order book. During 1989 sales totalled 129 Renegade IIs.[10][11]

The Renegade two was initially offered to buyers in six different configurations:[12][13]

Renegade Spirit

In May 1987 a new version of the basic Renegade design first flew. Named the Renegade Spirit it added a radial engine-style round cowling and additional fuselage stringers to give the aircraft a rounded look. The standard engine was the 64 hp (48 kW) Rotax 532 and later the Rotax 582 of the same output, with the 80 hp (60 kW) four-stroke Rotax 912UL added as a later option. Fibreglass wheel pants are also an option.[13][14][15][16]

Design

The Renegade fuselage is constructed of aluminium square tubing extrusions and fittings, fastened with Avex rivets. The turtle deck and engine cowling are made from fibreglass. The fin, rudder, horizontal stabilizer and elevators are built from aluminum tubing and channel sections. The tail is wire-braced. A manual trim tab mounted on the elevator is an option. The landing gear is of conventional configuration and incorporates bungee suspension. The welded engine mount is 4130 steel.[12][15][17]

The Renegades's wings have a positive stagger and incorporate a single faired interplane strut and cabane struts as well as wire-bracing. The top wing has a span of 21 ft (6.4 m) and incorporates a 10 degree sweep to improve visibility from the pilot's back seat, accessibility for the front seat passenger and reduces adverse yaw. The lower wing has 3 degrees of dihedral. Ailerons are of the Friese type, with two ailerons on the lower wing standard and four ailerons optional. The front wing spar was initially a 3 in (7.6 cm) aluminum tube and the rear spar is "C" channel. Starting 1 January 1989 the front spar was changed to a rectangular spar and an outboard drag brace was added, increasing wing rigidity. The ribs are stamped aluminum and mate with an aluminium sheet leading edge. All surfaces are covered with aircraft fabric. Controls are via torque tubes.[12][17]

The Renegade II wing design was sand-bag tested on 16 February 1988 to 4,050 lb (1,837 kg), or +7.2 g working load, with a +10 and -6 gs ultimate load.[12][15]

The company indicates that construction time varies between 300–500 hours, depending on builder experience.[17]

Operational history

Renegade Spirit on floats

Renegades have been equipped with floats for operations from water.[18]

Variants

Renegade
Single seat prototype, one built, powered by a 40 hp (30 kW) Rotax 447 powerplant.[12][19]
Renegade II
Two seat biplane, powered by a 50 hp (37 kW) Rotax 503 or 64 hp (48 kW) Rotax 532.[12]
Renegade Spirit
Two seat biplane with round cowling, powered by a 64 hp (48 kW) Rotax 532 or Rotax 582 or 80 hp (60 kW) four-stroke Rotax 912UL[2]

Aircraft on display

Specifications (Renegade II)

Data from Kitplanes,[4] Murphy Aircraft[12] and The Incomplete Guide to Airfoil Usage[20]

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

References

  1. 1 2 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 62. Belvoir Publications. ISSN 0891-1851
  2. 1 2 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 212. BAI Communications. ISBN 0-9636409-4-1
  3. ↑ Downey, Julia: 2008 Kit Aircraft Directory, Kitplanes, Volume 24, Number 12, December 2007, page 63. Primedia Publications. ISSN 0891-1851
  4. 1 2 Kitplanes Staff: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 57. Primedia Publications. IPM 0462012
  5. ↑ Patterson AeroSales (n.d.). "Murphy Renegade Spirit". Retrieved 2009-12-31.
  6. ↑ Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 66. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  7. ↑ Transport Canada (December 2009). "Listing of Models Eligible to be Registered as Advanced Ultra-Light Aeroplanes (AULA)". Retrieved 2010-01-01.
  8. ↑ Experimental Aircraft AssociationName (January 2010). "Special Light-Sport Aircraft". Retrieved 2010-01-01.
  9. ↑ Federal Aviation AdministrationName (January 2009). "Revised Listing of Amateur-built Aircraft Kits" (PDF). Retrieved 2010-01-01.
  10. 1 2 Murphy Aircraft: Meet Our Staff: President Darryl Murphy, Towards the Flightline, Winter 1993-84 page 3. Murphy Aircraft.
  11. ↑ Murphy Aviation: News Bulletin, page 4. Murphy Aviation, Spring 1988
  12. 1 2 3 4 5 6 7 Murphy Aviation Limited: Renegade, page 3. Murphy Aviation Limited, 1986.
  13. 1 2 Murphy Aviation: News Bulletin, page 2. Murphy Aviation, Summer 1987
  14. ↑ Armstrong, Ken: Catching the Spirit, Kitplanes Magazine
  15. 1 2 3 Murphy Aviation: Catching the "Spirit" in a Murphy Rengade - Info Package. Murphy Aviation, 1990
  16. ↑ Campbell, Jim: Getting the Spirit. Sport Pilot, pages 20-25, 66-70, April 1989
  17. 1 2 3 Murphy Aviation: The Rengade Info Package. Murphy Aviation, 1989
  18. ↑ Murphy Aircraft: Now Flying, Towards the Flightline, Fall 1996 page 6. Murphy Aircraft.
  19. ↑ Jones, Mary: Murphy's Renegade,
  20. ↑ Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Retrieved 11 September 2013.

External links

Wikimedia Commons has media related to Murphy Renegade.
This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.