Isentropic process

In thermodynamics, an isentropic process is an idealized thermodynamic process that is adiabatic and in which the work transfers of the system are frictionless; there is no transfer of heat or of matter and the process is reversible.[1][2][3][4][5][6] Such an idealized process is useful in engineering as a model of and basis of comparison for real processes.[7]

The word 'isentropic' is occasionally, though not customarily, interpreted in another way, reading it as if its meaning were deducible from its etymology. This is contrary to its original and customarily used definition. In this occasional reading, it means a process in which the entropy of the system remains unchanged, for example because work done on the system includes friction internal to the system, and heat is withdrawn from the system, in just the right amount to compensate for the internal friction, so as to leave the entropy unchanged.[8]

Background

The second law of thermodynamics states that,

TdS \ge \delta Q

where \delta Q is the amount of energy the system gains by heating, T is the temperature of the system, and dS is the change in entropy. The equal sign refers to a reversible process, which is an imagined idealized theoretical limit, never actually occurring in physical reality.[9][10] For an isentropic process, which by definition is reversible, there is no transfer of energy as heat because the process is adiabatic. In an irreversible process of transfer of energy as work, entropy is produced within the system; consequently, in order to maintain constant entropy within the system, energy must be removed from the system as heat during the process.

For reversible processes, an isentropic transformation is carried out by thermally "insulating" the system from its surroundings. Temperature is the thermodynamic conjugate variable to entropy, thus the conjugate process would be an isothermal process in which the system is thermally "connected" to a constant-temperature heat bath.

Isentropic processes in thermodynamic systems

T-s (Entropy vs. Temperature) diagram of an isentropic process, which is a vertical line segment.

The entropy of a given mass does not change during a process that is internally reversible and adiabatic. A process during which the entropy remains constant is called an isentropic process, written  \bigtriangleup s=0 or  s_1 = s_2 . [11] Some isentropic thermodynamic devices include: pumps, gas compressors, turbines, nozzles, and diffusers.

Isentropic efficiencies of steady-flow devices in thermodynamic systems

Most steady-flow devices operate under adiabatic conditions, and the ideal process for these devices is the isentropic process.The parameter that describes how efficiently a device approximates a corresponding isentropic device is called isentropic or adiabatic efficiency.[12]

Isentropic efficiency of Turbines:

 \eta _T = \frac{\text{Actual Turbine Work}}{\text{Isentropic Turbine Work}}=\frac{W_a}{W_s} \cong \frac{h_1-h_{2a}}{h_1-h_{2s}}

Isentropic efficiency of Compressors

 \eta _C = \frac{\text{Isentropic Compressor Work}}{\text{Actual Compressor Work}}=\frac{W_s}{W_a} \cong \frac{h_{2s}-h_1}{h_{2a}-h_1}

Isentropic efficiency of Nozzles

 \eta _N = \frac{\text{Actual KE at Nozzle Exit}}{\text{Isentropic KE at Nozzle Exit}}=\frac{V_{2a}^2}{V_{2s}^2} \cong \frac{h_1-h_{2a}}{h_1-h_{2s}}

For all the above equations:

 h_1 is the enthalpy at the entrance state
 h_{2a} is the enthalpy at the exit state for the actual process
 h_{2s} is the enthalpy at the exit state for the isentropic process

Isentropic devices in thermodynamic cycles

Ideal Rankine Cycle 1->2 Isentropic compression in a pump
Ideal Rankine Cycle 3->4 Isentropic expansion in a turbine
Ideal Carnot Cycle 2->3 Isentropic expansion
Ideal Carnot Cycle 4->1 Isentropic compression
Ideal Otto Cycle 1->2 Isentropic compression
Ideal Otto Cycle 3->4 Isentropic expansion
Ideal Diesel Cycle 1->2 Isentropic compression
Ideal Diesel Cycle 3->4 Isentropic expansion
Ideal Brayton Cycle 1->2 Isentropic compression in a compressor
Ideal Brayton Cycle 3->4 Isentropic expansion in a turbine
Ideal Vapor-compression refrigeration Cycle 1->2 Isentropic compression in a compressor
NOTE: The isentropic assumptions are only applicable with ideal cycles. Real world cycles have inherent losses due to inefficient compressors and turbines. The real world system are not truly isentropic but are rather idealized as isentropic for calculation purposes.

Isentropic flow

In fluid dynamics, an isentropic flow is a fluid flow that is both adiabatic and reversible. That is, no heat is added to the flow, and no energy transformations occur due to friction or dissipative effects. For an isentropic flow of a perfect gas, several relations can be derived to define the pressure, density and temperature along a streamline.

Note that energy can be exchanged with the flow in an isentropic transformation, as long as it doesn't happen as heat exchange. An example of such an exchange would be an isentropic expansion or compression that entails work done on or by the flow.

For an isentropic flow, entropy density can vary between different streamlines. If the entropy density is the same everywhere, then flow is said to be homentropic.

Derivation of the isentropic relations

For a closed system, the total change in energy of a system is the sum of the work done and the heat added,

dU = \delta W + \delta Q\,\!

The reversible work done on a system by changing the volume is,

dW = -pdV\,\!

where p is the pressure and V is the volume. The change in enthalpy (H = U + pV\,\!) is given by,

dH = dU + pdV + Vdp\,\!

Then for a process that is both reversible and adiabatic (i.e. no heat transfer occurs),  \delta Q_{rev} = 0\,\!, and so dS=\delta Q_{rev}/T = 0\,\!. All reversible adiabatic processes are isentropic. This leads to two important observations,

dU = \delta W + \delta Q = -pdV + 0\,\! , and
dH = \delta W + \delta Q + pdV + Vdp = -pdV + 0 + pdV + Vdp = Vdp\,\!

Next, a great deal can be computed for isentropic processes of an ideal gas. For any transformation of an ideal gas, it is always true that

dU = nC_vdT\,\!, and dH = nC_pdT\,\!.

Using the general results derived above for dU and dH, then

dU = nC_vdT = -pdV\,\!, and
dH = nC_pdT = Vdp\,\!.

So for an ideal gas, the heat capacity ratio can be written as,

\gamma = \frac{C_p}{C_V} = -\frac{dp/p}{dV/V}\,\!

For an ideal gas \gamma\,\! is constant. Hence on integrating the above equation, assuming a perfect gas, we get

 pV^{\gamma} = \mbox{constant} \, i.e.
\frac{p_2}{p_1} = \left(\frac{V_1}{V_2}\right)^{\gamma}

Using the equation of state for an ideal gas, p V = n R T\,\!,

 TV^{\gamma-1} = \mbox{constant} \,
proof: PV^\gamma= constant
\Rightarrow PVV^{\gamma-1}=constant
\Rightarrow nRTV^{\gamma-1}=constant
as nR= constant itself so we can divide both sides by "nR" and still have constant term in the R.H.S.
Ultimate result, TV^{\gamma-1}= constant
 \frac{p^{\gamma -1}}{T^{\gamma}} = \mbox{constant}

also, for constant C_p = C_v + R (per mole),

 \frac{V}{T} = \frac{nR}{p} and p = \frac{nRT}{V}
 S_2-S_1 = nC_p \ln\left(\frac{T_2}{T_1}\right) - nR\ln\left(\frac{p_2}{p_1}\right)
 \frac{S_2-S_1}{n} = C_p \ln\left(\frac{T_2}{T_1}\right) - R\ln\left(\frac{T_2 V_1}{T_1 V_2}\right ) = C_v\ln\left(\frac{T_2}{T_1}\right)+ R \ln\left(\frac{V_2}{V_1}\right)

Thus for isentropic processes with an ideal gas,

 T_2 = T_1\left(\frac{V_1}{V_2}\right)^{(R/C_v)} or  V_2 = V_1\left(\frac{T_1}{T_2}\right)^{(C_v/R)}

Table of isentropic relations for an ideal gas

 \frac{T_2}{T_1} =\,\!  \left (\frac{p_2}{p_1} \right )^\frac {\gamma-1}{\gamma} =\,\! \left (\frac{V_1}{V_2} \right )^{(\gamma-1)} =\,\!  \left (\frac{\rho_2}{\rho_1} \right )^{(\gamma - 1)}
 \left (\frac{T_2}{T_1} \right )^\frac {\gamma}{\gamma-1} =\,\!  \frac {p_2} {p_1} =\,\! \left (\frac{V_1}{V_2} \right )^{\gamma} =\,\!  \left (\frac{\rho_2}{\rho_1} \right )^{\gamma}
 \left (\frac{T_1}{T_2} \right )^\frac {1}{\gamma-1} =\,\!  \left (\frac{p_1}{p_2} \right )^\frac {1}{\gamma} =\,\!  \frac{V_2}{V_1} =\,\! \frac{\rho_1}{\rho_2}
 \left (\frac{T_2}{T_1} \right )^\frac {1}{\gamma-1} =\,\!  \left (\frac{p_2}{p_1} \right )^\frac {1}{\gamma} =\,\! \frac{V_1}{V_2} =\,\!  \frac{\rho_2}{\rho_1}

Derived from:


pV^{\gamma} = \text{constant}
\,\!

pV = m R_s T
\,\!

p = \rho R_s T\,\!
\,\!
Where:

See also

Notes

  1. Partington, J.R. (1949), An Advanced Treatise on Physical Chemistry., volume 1, Fundamental Principles. The Properties of Gases, London: Longmans, Green and Co., p. 122.
  2. Kestin, J. (1966). A Course in Thermodynamics, Blaisdell Publishing Company, Waltham MA, p. 196.
  3. Münster, A. (1970). Classical Thermodynamics, translated by E.S. Halberstadt, Wiley–Interscience, London, ISBN 0-471-62430-6, p. 13.
  4. Haase, R. (1971). Survey of Fundamental Laws, chapter 1 of Thermodynamics, pages 1–97 of volume 1, ed. W. Jost, of Physical Chemistry. An Advanced Treatise, ed. H. Eyring, D. Henderson, W. Jost, Academic Press, New York, lcn 73–117081, p. 71.
  5. Borgnakke, C., Sonntag., R.E. (2009). Fundamentals of Thermodynamics, seventh edition, Wiley, ISBN 978-0-470-04192-5, p. 310.
  6. Massey, B.S. (1970), Mechanics of Fluids, Section 12.2 (2nd edition) Van Nostrand Reinhold Company, London. Library of Congress Catalog Card Number: 67-25005, p. 19.
  7. Çengel, Y.A., Boles, M.A. (2015). Thermodynamics: An Engineering Approach, 8th edition, McGraw-Hill, New York, ISBN 978-0-07-339817-4, p. 340.
  8. Çengel, Y.A., Boles, M.A. (2015). Thermodynamics: An Engineering Approach, 8th edition, McGraw-Hill, New York, ISBN 978-0-07-339817-4, pp. 340–341.
  9. Guggenheim, E.A. (1985). Thermodynamics. An Advanced Treatment for Chemists and Physicists, seventh edition, North Holland, Amsterdam, ISBN 0444869514, p. 12: "As a limiting case between natural and unnatural processes we have reversible processes, which consist of the passage in either direction through a continuous series of equilibrium states. Reversible processes do not actually occur ...."
  10. Kestin, J. (1966). A Course in Thermodynamics, Blaisdell Publishing Company, Waltham MA, p. 127: "However, by a stretch of imagination, it was accepted that a process, compression or expansion, as desired, could be performed "infinitely slowly" or as is sometimes said, quasistatically." P. 130: "It is clear that all natural processes are irreversible and that reversible processes constitute convenient idealizations only."
  11. Cengel, Yunus A., and Michaeul A. Boles. Thermodynamics: An Engineering Approach. 7th Edition ed. New York: Mcgraw-Hill, 2012. Print.
  12. Cengel, Yunus A., and Michaeul A. Boles. Thermodynamics: An Engineering Approach. 7th Edition ed. New York: Mcgraw-Hill, 2012. Print.

References

This article is issued from Wikipedia - version of the Friday, May 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.