Rim Runner

This article is about a water ride. For other uses, see Rimrunners (disambiguation).
Rim Runner
Adventuredome
StatusClosed
Opening dateUnknown
Closing dateFebruary 3, 2013 (2013-02-03)
General statistics
Type Shoot the Chute
Manufacturer Arrow Dynamics
Height 65 ft (20 m)
Drop 60 ft (18 m)

Rim Runner was an Arrow Dynamics Shoot-the-Chutes located at Adventuredome theme park at Circus Circus Las Vegas and was one of the world's longest and tallest indoor water flume rides with a height of 65 feet and a drop of 60 feet. The ride ceased operation on February 3, 2013 to make way for El Loco which opened in February 2014.

Ride layout

Riders board on the second level of the park. Each boat holds up to 15 passengers in three rows of five secured by a single-position lap bar that spanning each row. Once dispatched, conveyor belts move the boat into the water for a short "whitewater" trip through the dome. Whereas once the boat passed animatronic dinosaurs, the ride passed newer attractions such as Chaos and the Frog Hopper and under the Canyon Blaster roller coaster.

The boat slows as it enters a "lake" area and made a right turn. The water is at its deepest point at this point, approximately 12 feet, as this is the main reservoir for the ride. Another set of conveyor belts lifts the boat out of the water, into a tunnel and onto the one and only chain lift for the ride. As riders ascended the dimly lit cavern, pin points of light that look like eyes flicker. During the annual Halloween event, Fright Dome, special music and extra decoration fills the lift tunnel.

At the top, there was a slight drop-off the chain as the boat heads toward the drop. An animatronic "falling rock" teeters close to the boat. This area was once filled with an extremely dense layer of mist, to obscure riders' vision of what lies ahead. At this point, the Canyon Blaster is mere feet above the heads of Rim Runner passengers. Another set of conveyor belts positions the boat for its final plunge, an 80-foot camelback drop to a wet conclusion. A final right-hand turned places the boat at the final set of conveyor belts that lifts the boat out of the water and back into the station.

Changes

When the attraction first opened riders were soaked during the final plunge and splashdown. The large wave created would hit the bridge that spans the runout, getting onlookers wet as well. However, due to complaints an acrylic glass wall was soon added to the bridge to keep the upper level dry. This area is now home to numerous arcade-style video games.

In addition to the wet spectators, passengers began to complain that the ride was simply too wet for the climate-controlled theme park. During the first few years of operations several remedies were tried by making adjustments to the boats themselves. At one point they even kept one boat in the original configuration calling it the "soak boat" and the modified one the "sprinkle boat". Eventually all the boats were modified to minimize the amount of water hitting the riders.

Over the years the boats have had other changes as well. Complaints about injuries sustained when the boat impacted the runout at the bottom of the drop were common during the first few years. First management put up a higher height requirement for the front row before eventually blocking off the front row entirely. Next, the back row was blocked off presumably to "balance" the boat (although not until some time later). The result is now a boat designed for 20 to 25 passengers fitting a maximum of 12.

Rim Runner officially closed to the public on Sunday, February 3, 2013 for future development.

See also

2013 in amusement parks

This article is issued from Wikipedia - version of the Monday, November 10, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.