Signal edge

Signal edges shown in rectangular pulse amplitude modulation with polar non-return-to-zero, inverted coding waveform

In electronics, a signal edge is a transition in a digital signal either from low to high (0 to 1) or from high to low (1 to 0). It is called an "edge" because the square wave which represents a signal has edges at those points.

A rising edge is the transition from low to high.[1] It is also named positive edge. When a circuit is rising edge-triggered, it becomes active when its clock signal goes from low to high, and ignores the high-to-low transition.

A falling edge is the high to low transition.[1] It is also known as the negative edge. When a circuit is falling edge-triggered, it becomes active when the clock signal goes from high to low, and ignores the low-to-high transition.

A leading edge is an event that is triggered on the front edge of a pulse. Assuming a clock begins at t = 0, the first position would be triggered at t = 1.

A trailing edge is the opposite of a leading edge. It is triggered on the back edge of a pulse. Assuming the clock begins at t = 0, the first position would be triggered at t = 0.

The terms front edge or leading edge, and back edge or trailing edge describe the related position of edges in a clock cycle.

See also

References

  1. 1 2 Berger, Arnold S., Hardware and Computer Organization, p. 32, ISBN 978-0-7506-7886-5


This article is issued from Wikipedia - version of the Tuesday, February 23, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.