Robert C. Sprague

Robert C. Sprague

Sprague in 1952
Born (1900-08-02)August 2, 1900
New York City, New York
Died September 27, 1991(1991-09-27) (aged 91)
Williamstown, Massachusetts
Nationality American
Occupation Engineer and businessman
Known for Manufacture and development of electronic components. Best known for the wide selection and reliability of its capacitor products

Robert C. Sprague (August 2, 1900 – September 27, 1991) was the son of Frank J. Sprague Jr and Harriet Sprague. Sprague founded Sprague Electric (originally Sprague Specialties Company), Quincy, MA in 1926, and served as president from 1926-1953 and chief executive from 1953-1971. He invented the tone control for radio and the paper capacitor that launched his business.

Sprague was appointed by President Eisenhower to serve as Undersecretary to the Air Force in 1953. He accepted then rejected the position due to financial difficulties.

Sprague Electric was an electronic component maker and was best known for making a large line of capacitors (electron storage device) used in a wide variety of electrical and electronic in commercial, industrial and military/space applications. Other products include resistive components, magnetic components (transformers and coils), filter assemblies, semiconductors and integrated circuits. Sprague had two brothers, Frank Desmond, and Julian Sprague, who assisted in company operations. Sprague capacitor products were bought and absorbed by Vishay in early 1993.

Education and Adulthood

After graduating from The Hotchkiss School in 1918, Robert Sprague followed his father Frank's (a business associate to Thomas Alva Edison) footsteps, and went to the United States Naval Academy in Annapolis. He later attended the Naval Post Graduate School and completed his graduate program at the Massachusetts Institute of Technology (MIT). While a naval officer he invented the tone control for amplifiers and radio sets. In 1921 he married Florence Antoinette van Zelm. They were married until her death in 1987. Sprague patented the paper condenser (capacitor) and tone control in 1926, and this provided the capital to start a business.

Sprague Specialties Company (1926-1942)

Most of the material in this section is a summary from the Massachusetts College of Fine Arts (MCLA) library website.[1]

Sprague Electric Logos from 1926-1985

Sprague used $25,000 of his savings to open Sprague Specialties Company at his home in Quincy, MA, in 1926. One of his first products was the mini condenser (an old name for capacitor). Mini condensers were commonly used in radio applications for noise filtering, signal coupling and tone controls. Early capacitors were two pieces of metal foil wrapped between wax paper or any other type of suitable insulation material. The type of insulating material determined the capacitor's storage capacity (measured in Farads) and the voltage tolerated. Wire leads from the capacitor connect to each metal foil. Capacitors were also useful in high power applications like motors, and soon Sprague turned his attention those areas as well.

Sprague found a sustainable product line in capacitors. The increase in the types of radios using AC created demand for many different types of capacitors. By 1929 Sprague Specialties Company needed a bigger facility, and in 1930 Sprague purchased a plant on Beaver Street in North Adams, MA, in Berkshire County. When local residents heard the company was expanding, Sprague received all kinds of incentives from the banks and other businesses to relocate there. Sprague chose the area because he wanted to open a shop where his father Frank had grown up.

By the mid-1930s Sprague had become a recommended source for capacitors by radio manufacturers, radio repair and many electrical applications. As the size of the company grew there was a desire from the manufacturing workers to form an organized labor union. The Wagner Act of 1935 prohibited company unions. In 1937 the company agreed with the workers to form an independent union, the Independent Condenser Workers Union.

From 1936-1944, the Sprague Specialties Company sales increased seven-fold, however expansion put a damper to profits. For many years the company sustained losses. Robert felt strongly connected to his company and to the people of North Adams, and always tried to put the town population first. As a result, the Sprague Specialties Company became the largest employer in North Adams.

Sprague purchased the Arnold Print Works plant in North Adams, MA. This became the permanent headquarters and principal manufacturing site for Sprague Specialties Company.

By 1942 the Sprague Specialties Company relocated to the abandoned Arnold Print Works Facility on Marshall St. This became the main facility and consisted of 26 buildings that were interconnected by tunnels and bridges. Former employees remember the complex layout and interesting ways to get from one department to another. Previous to the Sprague Specialties Company, the Arnold Print Works had been the largest employer in North Adams, operating in the area from 1860-1942.

Also in 1942 company's name changed from Sprague Specialty Products to Sprague Electric. The Sprague Electric name would remain until its last owner Penn Central started to sell off the Sprague division in the early 1990s.

The Sprague Log (1938-1985)

Beginning in 1938 Sprague tried to bridge the gap between the people and the business with the publication of the Sprague Log. Sprague used this newsletter to bring management and workers closer, and to maintain morale after forcing workers to take a 10% pay cut that same year. The publication was divided into two sections. Part 1 discusses the company accomplishments, achievements and the loyalty of Sprague employees, often spotlighting individuals. Part 2 are employee announcements – births and weddings, social activities and other family events.

Sprague Electric: Early years (1942-1960)

After the Japanese invasion of Pearl Harbor on December 7, 1941 and the declaration of war that followed, US manufacturing stopped commercial production and switched to wartime activities.[2] Sprague Electric's participation in the US war effort proved to be a healthy one in reputation, future contracts, and sales, and propelled the Sprague name to the forefront of the American electronic business.

One of Sprague Electric's biggest contributions to the war effort was in the manufacturing of the variable timing proximity fuze.[1] The proximity fuse was a small transmitter (and in some cases a receiver) built on a bomb or artillery shell that would detonate the bomb or shell before impact, causing greater destruction. Sprague Electric continued to make capacitor and resistive components to meet military requirements of quality and reliability. Robert C. Sprague was also a member of War Production Board for the Advisory Committee on Capacitors (1942-1945).

Tantalum vs aluminum oxide electrolytic capacitors. Size comparison of two equal value capacitors. Larger is around 1946 and the smaller is a Sprague tantalum capacitor from the 1980s

During the Second World War, Sprague invented the tantalum capacitor. The use of tantalum allows capacitors to achieve high values of electron storage or capacitance along with higher operating voltages. The big advantage is that the use of tantalum makes the capacitor a fraction of the size of a more conventional design. This aids in cutting space size. Tantalum capacitors are still used today. Vishay Intertechnology, which currently owns the Sprague capacitor property rights, calls their tantalum capacitors the Sprague tantalum.

Post World War II

After the Second World War, Sprague Electric retooled for the commercial and industrial products market and eventually Sprague capacitors and resistive products became a trusted brand name. Radio and television manufacturers like RCA, Zenith and Philco continued to use Sprague Electric products. Sprague Electric products were also found in stores selling electronic parts, and the electronics servicing business. In 1946 Howard W. Sams (SAMS Publishing) introduced their Photofact Servicing manuals, which were a valuable resource for the service of consumer electronics.[3] Sprague Electric capacitors were listed as a recommended replacement part.

Sprague Electric flourished during the Cold War and the Space Race because of their reputation and experience in the building of military components. By 1954 most of Sprague Electric's sales and profits were from the TV and radio markets, military products sales were second. Sales reached almost $50 million.[4] Also in 1954, the company built new capacitor plants in North Carolina and in the US Territory of Puerto Rico.[5] It was the beginning of Robert C. Sprague's dream to make Sprague Electric into a major corporation; this expansion would continue into the late 1960s.

Sales of Sprague Electric products remained steady from 1954-1958 at just below $50 million.[6] The company continued to expand its product base by opening a semiconductor plant in New Hampshire in 1957 and a magnetics plant in California.[7] As the company grew, union membership (Independent Condenser Workers Union #2) grew as well. By November 1956 straight hourly workers wages were tied to the Bureau of Labor Statistics Consumer Price Index. Additionally, workers received better benefits. The Sprague Log recorded in this in a "Special Negotiations Supplement."[8]

Sprague Electric: Expansion, Growth and Difficulties (1960-1971)

By 1959 Sprague Electric achieved $50 million in sales. Robert C. Sprague continued as Chairman of the Board and his brother Julian as President.[6] Contemporary advances in the integrated circuit and thin film technologies, Sprague saw a need to move to support and design products around these new technologies. Thin film products and integrated circuits lead to more compact circuit designs and smaller products. Sprague understood this as the future trend in electronics; he opened more plants in the United States and developed a world wide network of sales offices.

Comparison of non-film and film capacitors. Larger is Sprague Black Beauty (1950's) and smaller is polyethylene film (2000's) Both have identical capacitance but the film has 3 times the voltage rating.

By 1960 Sprague Electric had manufacturing plants in North Carolina, New Hampshire, Vermont, Wisconsin, Virginia, Maryland and California.[6] Many were involved in making capacitors that used thin film technology. This proved to be a very important product for Sprague Electric. These plants also produced magnetic products (transformers, inductors etc.). With advances in transistor and integrated circuit technology (later computer chips) resistance to noise interference became a factor. Magnetics played a role in reducing noise interference.

Sprague got into the semiconductor business in the late 1950s, somewhat later than the already established semiconductor firms. Fairchild Camera (directed by Robert Noyce) had marketed the first commercial integrated circuit as early as 1963. Sprague wanted to be an early participant into this young product. They set up a group at the New Hampshire facility where thin film capacitors were made. In 1965 Sprague Electric acquired Micro Tech (Sunnyvale, CA), a manufacturer of semiconductor equipment for fabrication.[9]

By 1966 Sprague opened a brand new facility in Worcester, MA dedicated to semiconductor and integrated circuit fabrication. The new factory was headed by Dr. John L. Sprague, the youngest son of Robert C. Sprague. John Sprague was a graduate of Stanford University, and specialized in semiconductor development.[10] Eventually the Micro Tech was moved to the same area. However Sprague's plans for Micro Tech never blossomed, and they wound up making capacitors.[11] Robert C. Sprague's heavy investment in the semiconductor business reduced income for the company.[12]

Sales of Sprague Electric products were $100 million by 1966 and the workforce increased to over 12,000.[13] As the company grew, management was reorganized, and more expansion occurred, in the form of external partnerships.[14] However, this rapid expansion served to keep profits down. Additionally, expansion did not have much impact on wages, benefits and working conditions. As one local historian put it, Robert Sprague's view of his employees was "paternalistic". In March 1970 a major labor strike started and affected all areas of the company. The strike lasted 10 weeks and was ultimately settled by a federal mediator. While Robert C. Sprague and the Union representatives shook hands after the settlement, the results had a negative effect on future of the company, its management and employees.[15]

Sprague Electric: Later years (1970-1978)

View of Sprague North Adams, Massachusetts, headquarters and main plant before 1985 closing

With the end of the 1970 strike, Robert C. Sprague retired as chief executive and was succeeded by Neal W. Welch. Although the workers got some of what they demanded, the strike and the new contract would devastate the company. Sprague Electric made cuts to minimize costs, including reducing the labor force and shuttering some of its North Adams operations. Employee morale plummeted which was reflected in the rapid decline of the company's newsletter the Sprague Log during this period.[15] The paper was only published twice a year, then not all until 1978. In 1978, the company was sold to General Cable, which later was taken over by Penn Central in 1981.[1]

Closing of the North Adams facility and its future

In the 1980s, Sprague Electric was a division of Penn Central. In 1981, John L. Sprague, the younger son of Robert C. Sprague, was named chief executive.[10] John Sprague tried to bring the employees and management closer together. The Sprague Log increased its frequency of publication, and again emphasized the need to work together. During his leadership, sales of Sprague Electric products still grew steadily but not the company's profits. Capacitor products from overseas as well as other electrical and electronic components were cutting into sales from US manufacturers.[16] Also by the 1980s, many electronic assembly plants were overseas, and there was more inclination to buy local or from areas closer to assembly. This was an area Sprague Electric could not compete. Even though sales of Sprague products reached $500 million in the mid-1980s, the Sprague division continue to reorganize. In 1985, it was announced that the Sprague division headquarters would move to Lexington, Massachusetts, and the North Adams, MA plant would close down.[17] As a company Penn Central focused on profits, and Sprague Electric wasn't profitable. As a result, Sprague Electric operations were gradually closed or sold off. Many of the capacitor products were sold in 1993 to Vishay, a leading manufacturer of components used in electronics for industrial and military/space applications.[18]

After Sprague Electric's permanent closing in North Adams, the population of North Adams dropped by 4,000 and the unemployment climbed to 14%. The biggest employer was gone and the site was rusting and decaying.[19] Removal and cleanup of the industrial waste were also issues.

Massachusetts Museum of Contemporary Art[20]

The following material is a summary of the history of the MASS MocA found at the MASS MocA Website (see references).

Entrance to MASS MoCA (formerly Sprague Electric Headquarters on Marshall Street)

In 1986, Thomas Krens, director of Williams College Museum of Art, was looking for an exhibit space for large-scale contemporary art works. The mayor of North Adams, John Barrett III, suggested the unused Sprague Electric facility. Colleagues of Thomas Krens provided the political and community outreach, and in 1989, the Massachusetts state legislature announced their support.

After several years of planning, project architects Bruner, Cott and Associates completed the master plan and the final design. Finally in 1999, the years of demolition, cleanup, restoration and construction were completed and the Massachusetts Museum of Contemporary Art (MASS MoCA) opened. Twenty-five of the 26 original buildings were restored, including many of the bridges and tunnels. The Marshall Street site was listed in the National Historic Register. MASS MoCA is the largest contemporary art museum in the United States. The site is a multiuse site with the museum, offices, businesses, and recreation and special activity areas.

Family and Philanthropy Notes

During his business life, Robert Sprague served on the board for the following organizations and businesses:[21]

Other Notable Awards, Memberships and Appointments[22]

Robert C. Sprague was the driving force behind the annual Williamstown Theatre Festival. Aside from business and family, theater arts was his greatest love. In the 1940s he (as Sprague Electric) sponsored a symphony orchestra which later became the Berkshire Symphony Orchestra at Williams College.[15] In addition his favorite sport was skiing. He was the author of two books ("Sprague Electric" of North Adams: a pioneer in electronics in New England, Newcomen Publishing (1958) and Parallel Skiing for Weekend Skiers, self-published (1970). Robert and his wife Florence Antoinette van Zelm had two children, Robert C. Sprague Jr and (Dr.) John L. Sprague. John L. Sprague was head of Sprague Electric from 1981 until its closing until 1993. Robert C. Sprague died at home in Williamstown, Mass on September 27, 1991.[21]

Mystique of Sprague Capacitors

Sample of Sprague capacitors and resistive Components over 60 years

With the revival of interest in vacuum tube amplifiers comes the mystique of having the right components for top performance. Sprague Electric components had a long history of name recognition, quality and brand loyalty.

In the early 1950s Sprague produced the "Black Beauty" line of capacitors. These paper capacitors were similar to Robert Sprague's original patent. Instead of using wax coating on the outer body to keep moisture out (moisture renders capacitors useless), Sprague used a resin material to encapsulate the device and provide better and longer lasting resistance to moisture.

In the late 1960s capacitors developed quickly as better materials, such as mylar, were used in their production. Capacitors became more reliable, smaller, and able to withstand higher voltages. Sprague Electric's "Orange Drop" capacitors were well-received by manufacturers and designers. They set the standard for "modern" capacitors in appearance and performance. Television circuit boards with Orange Drop capacitors can still be found. Today some designers and restorers will use only Sprague/Vishay Orange Drops or any Sprague Capacitor.[23] After the breakup of Sprague Electric, the Orange Drop Capacitor line was continued by SBE Inc until 2012, when the Orange Drop product line was sold by SBE to Cornell Dubilier.[24]

References

  1. 1 2 3 Library, MCLA. "Sprague Log". MCLA. MCLA. Retrieved 2013-03-06.
  2. ↑ "Letter from the War Department" (PDF). Sprague Log 4 (6): 2. January 1942. Retrieved 2014-01-06.
  3. ↑ "Who We Are". SAM's Publishing. Retrieved 2014-01-12.
  4. ↑ "Annual Report Shows All Time Records for Sales and Wages Last Year" (PDF). Sprague Log 16 (7): 1–2. March 23, 1954. Retrieved 2014-01-12.
  5. ↑ Log Vol 16 No 7, Sprague. "Special Issue" (PDF). March 1954. Sprague Electric. Retrieved 2013-03-08.
  6. 1 2 3 "Sprague Log National Issue" (PDF). SpragueLog 22 (7): 9–10. January 1960. Archived from the original (PDF) on January 6, 2014. Retrieved 2014-01-06.
  7. ↑ Log Vol 20 No 7, Sprague. "Annual Report to Employees" (PDF). March 1958. Sprague Electric. Archived from the original (PDF) on January 6, 2014. Retrieved 2013-03-08.
  8. ↑ Log Vol 19 No 3, Sprague. "Special Negotiations Supplement" (PDF). November 1956. Sprague Electric. Archived from the original (PDF) on January 6, 2014. Retrieved 2013-03-08.
  9. ↑ Log Vol 27 No 4, Sprague. "Micro Tech New Sprague Affiliate Family" (PDF). April 1965. Sprague Electric. Retrieved 2013-03-06.
  10. 1 2 Log March 1981, Sprague. "Dr. John Sprague Takes Over as Chief Executive" (PDF). March 1981. Sprague Electric. Retrieved 2013-03-09.
  11. ↑ Brown, Matthew L. "Micro Tech Putting A Charge In Battery Industry". October 26, 2009. WBJ Journal.com. Retrieved 2013-03-08.
  12. ↑ Manion (Editor), Marion H. (March 1968). "Annual Report" (PDF). Sprague Log 30 (4): 3–20. Retrieved 2014-01-12.
  13. ↑ "Major Changes Announced as Business Booms" (PDF). Sprague Log 28 (4): 1. January 1966. Retrieved 2014-01-06.
  14. ↑ Log Vol 28 No 4, Sprague. "Annual Report for Employees" (PDF). March 1966. Sprague Electric. Retrieved 2013-03-07.
  15. 1 2 3 Marino, Paul W. "Company Town". PaulWMarino.org. Retrieved 2013-03-07.
  16. ↑ Schoepfle, Gregory K. (August 1982). "Imports and Domestic Employment: Identifying Affected Industries" (PDF). Labor Review: 13–14. Retrieved 2014-01-12.
  17. ↑ Log April 1985, Sprague. "Sprague Consolidates Headquarters" (PDF). April 1985. Sprague Electric. Retrieved 2013-03-09.
  18. ↑ Timeline, Vishay. "Timeline". Vishay. Retrieved 2013-03-09.
  19. ↑ The Sprague Electric Company's Long Goodbye Pt1-4
  20. ↑ MoCA, MASS. "History of the Site". MASS MoCA. Retrieved 2013-03-07.
  21. 1 2 "Robert C. Sprague, 91; Began Sprague Electric". The New York Times. 1 October 1991.
  22. ↑ Sprague, Robert C. Memorial Tributes. National Academy of Engineering. Retrieved 2013-03-07.
  23. ↑ Wallace, Hank. "The Truth About Tone Capacitors". Wallace and Barbour 2010. Atlantic Quality Design. Retrieved 2013-03-07.
  24. ↑ http://www.sbelectronics.com/2012/10/sbe-announces-the-sale-of-the-orange-drop-product-line-to-cornell-dubilier-cde/

External links

This article is issued from Wikipedia - version of the Monday, April 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.