Roland MPU-IPC-T

roland MPU-IPC-T CARD

The Roland MPU-IPC-T is a MIDI Interface from Roland Corporation aimed at IBM PC and compatibles. It is an 8-bit ISA standardized half-size card connected to a break-out box via a DB-25 connector. This card seems to be a slightly modified version of the Roland MPU-IPC card. The MPU-IPC-T model, from various images and specification charts allows the user to select different Base I/O port address and IRQ settings, the other model does not it seems. The IRQ ranges are limited to 2 through 7 and the Base I/O port addresses from 325h to 338h.

The MPU-IPC-T is the successor of the MPU-IPC. The main difference is the ability to set jumpers for IRQ and I/O. The interface is intelligent MPU-401 like its predecessors and successors.

The break-out box has three DIN connectors for MIDI, 1xIN and 2xOUT plus three mini jack 3.5mm: 1xTAPE IN, 1xTAPE OUT and 1xMETRONOME OUT

This information is based on various pamphlets and brochures from Roland Corporation and personal user experience

See also

This article is issued from Wikipedia - version of the Friday, May 01, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.