Rotary saw

A rotary saw, spiral cut saw, or cut out tool is a type of mechanically powered saw used for making accurate cuts without the need for a pilot hole in wallboard, plywood, or another thin, solid material.

Another name commonly used to refer to this type of tool is RotoZip, from the Rotozip Tool Corp. a company set up by Bob Kopras, an American drywall installer who pioneered this type of saw. Rotozip was later acquired by Bosch Tool Corp. in 2003.

This type of tool was originally developed for making cut-outs in drywall but it was later discovered that a myriad other materials could easily be cut using the tool.

The design is similar to a small wood router but usually features only one handle for single handed operation. Bits look similar to a twist drill; some cut on the upward twist, and some cut downwards. The cutting edge on the flutes actually slices (either upwards or downwards) through the material which means that they can cut in any direction.

Medical use

A rotary reciprocating saw is a type of saw that spins a cutting implement around a rotary axis, instead of thrusting it along a linear axis. The first use of such devices was in medicine, where cutting through bone warranted the need for a saw with minimal stroke length, and a cutting action that could be implemented through depth cut rather than a follow through cut.

The timber industry now also uses this type of action to cut in the same manner. A particular manufacturer has a hand-held version for making difficult cuts, which would not be possible with other implements.

See also


This article is issued from Wikipedia - version of the Tuesday, April 22, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.