S-mount (CCTV lens)

S-mount camera PCB. The right one with lens detached shows a 1/3" CCD sensor. Spring is used to push and secure the lens when mounted.

The S-mount is a standard lens mount used in various surveillance CCTV cameras and webcams. It uses a male metric M12 thread with 0.5 mm pitch on the lens and a corresponding female thread on the lens mount; thus an S-mount lens is sometimes called an "M12 lens". Because the lens mounts are usually attached directly to the PCB of the sensor, the standard is often called "board lens". The supported sensor formats range from the smallest 1/6-inch type to the largest 1/3-inch having an 11mm diagonal sensor. The lens mount is usually made of plastic and the lenses lack an iris control. S-mount lenses do not have a flange and therefore there is no fixed lens to sensor distance and they must be adjusted to focus.[1]

See also

References

This article is issued from Wikipedia - version of the Monday, September 21, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.