S1W reactor

The S1W reactor was the first prototype naval reactor used by the United States Navy to prove that the technology could be used for electricity generation and propulsion on submarines. The S1W designation stands for

The land-based nuclear reactor was built at the National Reactor Testing Station, later called Idaho National Engineering Laboratory near Arco, Idaho.[1] The plant was the prototype for the USS Nautilus (SSN-571), the world's first nuclear-powered submarine. The specific location within the vast Idaho National Laboratory where the S1W prototype was located was the Naval Reactors Facility.

Design

Under the leadership of Admiral Hyman G. Rickover, Naval Reactors followed a concurrent design strategy, with the design and construction of the S1W reactor taking place ahead of the design and construction of the Nautilus. This enabled problems to be identified and resolved before they appeared in the shipboard plant. To better support this design process, the S1W power plant was built inside of a submarine hull. While the cramped spaces prevented engineers from obtaining information on some plant components, it provided a much more realistic example of how the shipboard plant would have to be constructed.

Operation

The S1W was a pressurized water reactor that utilized water as the coolant and neutron moderator in its primary system, and enriched Uranium-235 in its fuel elements. The S1W reactor reached criticality on March 30, 1953. In May of that year, it began power operations, performing a 100 hour run that simulated a submerged voyage from the east coast of the United States to Ireland. This test run clearly demonstrated the revolutionary impact that nuclear propulsion would have upon the submarine, which prior to that time was greatly limited in its ability to conduct continuous underwater operations by battery life and by the oxygen requirement of diesel propulsion systems.

The heated, pressurized water of the S1W reactor power plant was circulated through heat exchangers in order to generate high pressure saturated steam in a separate water loop. This saturated steam powered steam turbines for propulsion and generation of electricity. These facilities were constructed inside an elevated hull simulating the engineering portion of the Nautilus hull. A single propeller was simulated through use of a water brake. Large, exterior water spray ponds were used to dissipate the heat energy created in the facility into the air.

Following the commissioning of the USS Nautilus, the S1W plant was operated to support plant testing and training of operators. Trainees were graduates of a Naval Nuclear Power School located elsewhere in the United States. The course of study lasted six months and consisted of a combination of classroom and closely supervised practical training.

In the mid-1960s, the S1W core was removed. An extension was bolted to the top of the reactor vessel so that a larger S5W reactor core could be installed. After that time the prototype was called S1W/S5W core 4. The new core was first taken critical in late summer of 1967. In order to use the additional power generated by the S5W reactor, additional facilities were added in order to dump the excess steam when the plant was operated at higher power levels. These steam dumps were constructed in the same building as the original hull, but were outside the original submarine style hull.

S1W was shut down permanently in 1989 (October 17).[2]

References

  1. ↑ "STR (Submarine Thermal Reactor)". Reactors Designed by Argonne National Laboratory. Argonne National Laboratory. Retrieved 2012-05-08.
  2. ↑ Bettis Atomic Power Laboratory

External links

This article is issued from Wikipedia - version of the Thursday, March 10, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.