SIR-2

SIR-2 Mission Logo

The SIR-2 instrument is a redesigned, highly compact, monolithic grating, near infrared spectrometer chosen to be a payload on the Indian Chandrayaan-1 satellite. It is an ESA project, and is built by Max Planck Institute for Solar System Research, Polish Academy of Science and University of Bergen.

SIR-2 Instrument parts

Mission

The mission of the instrument is to map the lunar surface in the near infrared spectrum from 0.9 - 2.4 μm with an unprecedented resolution of 6 nm. The purpose of this is to obtain information on the mineral composition of the moon, which in turn will help getting insight into a number of questions:

Similar missions

The instrument is a redesigned version of SIR, which was flown on board the SMART-1 technology satellite. SIR performed the same mission, but had a problem with dark current induced noise due to varying temperatures caused by differences in heat flux from the light and dark side of the moon. SIR-2 will attempt to improve this, mainly by using a detector with an embedded thermoelectric cooler and a digital controller to keep the detector temperature stable. This will stabilize the dark current noise, making it simple to subtract it since it will have an almost constant level.

Electronics

The control unit of SIR-2 is based on a System-on-a-chip design, minimizing the size and power consumption of the unit. A central component is the radiation hardened RTAX2000S Axcelerator FPGA, containing a LEON (LEON3FT) SPARC compliant CPU, communications interface Intellectual property cores, and custom interfaces to the rest of the instrument.

References

Official Website

Official WEBSITE

This article is issued from Wikipedia - version of the Saturday, August 25, 2012. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.