SS Edenton

USAT Irvin L. Hunt (formerly SS Edenton) stranded in the Makassar Strait, Dutch East Indies, 1941.
History
Name: SS Edenton
Owner: U.S. Shipping Board
Builder: Skinner & Eddy
Laid down: 3 Sep 1918
Launched: 9 Nov 1918
Acquired: 5 Dec 1918
Commissioned: 5 Dec 1918, – 12 May 1919
In service: 5 Dec 1918–1946?
Renamed:
  • USS Edenton (ID-3696) 1918
  • Edenton 1919
  • USAT Irvin L. Hunt 1941
  • Edenton ~1946
Reclassified: AK-38 (1941)
Fate: Scrapped at Seattle, 1948
General characteristics
Type: Design 1079 cargo ship
Tonnage: 6,992 gross, 9,600 dwt
Displacement: 13,627 tons
Length:
  • 423 ft 10 in (129.18 m)
  • 409 ft (125 m) bp
Beam: 54 ft (16 m)
Draft: 26 ft 9 in (8.15 m)
Installed power: 1 × 2,500 IHP steam turbine
Propulsion: Single propeller
Speed: 11.5 kn (21.3 km/h)
Complement:
  • USN: 70
  • Peacetime: 30
  • WWII: unknown

SS Edenton was a steel-hulled cargo ship built in 1918 for the United States Shipping Board as part of the Board's World War I emergency shipbuilding program.

Edenton briefly served in the U.S. Navy in the immediate postwar period as USS Edenton (ID-3696), participating in a famine relief mission to Eastern Europe before decommissioning in 1919. Between the wars, the ship was placed into commercial service as SS Edenton.

In early 1941, Edenton was acquired by the War Department for service with the U.S. Army. Considered for transfer to Navy as AK-38 but retained by the Army for use as a transport and renamed USAT Irvin L. Hunt. Irvin L. Hunt survived the war and after transfer to the Maritime Commission, was again renamed SS Edenton. The ship was scrapped in 1948.

Construction and design

Edenton was built in Seattle, Washington in 1918 at the No. 1 Plant of the Skinner & Eddy Corporation[1]—the first in a series of 23 Design 1079 cargo ships built by Skinner & Eddy under the USSB's emergency wartime shipbuilding program.[2] The ship was laid down on 3 September, launched 52½ working (66 calendar) days later on 9 November, and delivered on 5 December—a total time under construction of just 70 working (92 calendar) days.[1]

As all previous ships built by the company for the USSB had been of the Design 1013 type, the company decided to differentiate the new type by changing its naming system. The 1013s had all been prefixed with the word West, so for the 1079s the names were started with the letter "E" instead. The company was to stick with this nomenclature through the next fourteen ships, but dropped it for the fifteenth ship in the batch, Wheatland Montana, after which names appear to have been assigned randomly.[2] Edenton herself was named after a city in North Carolina.[3]

Edenton had a designed deadweight tonnage of 9,600[1] and a gross register tonnage of about 7,000 tons.[4][5] The ship had a length of 423 feet 10 inches[3] (409 feet between perpendiculars),[4] a beam of 54 feet and a draft of 26 feet 9 inches.[3] She was powered by a 2,500 IHP oil-fired steam turbine[4][6] delivering a service speed of 11.5 to 12 knots.[3][4]

Service history

U.S. Navy service, 1918–1919

Edenton was delivered to the Navy three weeks after the end of World War I on 5 December 1918. She was commissioned the same day at the Puget Sound Navy Yard as USS Edenton (ID-3696), with Lieutenant Commander E. F. Kenney, USNRF, placed in command.[3]

Edenton began her one and only Navy mission on 11 December 1918, when she sailed for the east coast of the U.S. with a cargo of flour bound for Eastern Europe on a postwar famine relief mission. Arriving at New York on 27 January 1919, Edenton departed on 19 February for Trieste, Italy where her cargo was duly delivered. She then returned to the United States, arriving at New Orleans, Louisiana on 4 May. The ship was decommissioned a few days later on 12 May and returned to control of the U.S. Shipping Board.[3]

Interwar years

Following her decommission, Edenton was placed into merchant service by the USSB as SS Edenton. The ship appears to have ranged far and wide during this period of her career.

In the early 1920s, Edenton operated in both transatlantic and South American service, sailing between the United States and ports such as Rotterdam, the Netherlands and Havana, Cuba.[7] On 29 March 1925, Edenton suffered a collision about 35 miles east of Barcelona, Spain with a French schooner, Ville de Bassens. The schooner was sunk in the accident, but apparently no lives were lost. Edenton suffered only minor damage.[8]

By the late 1920s, the ship was in operation for the Roosevelt Line, sailing between U.S. ports such as New York and Los Angeles to various locations in the Pacific, including Honolulu, Hawaii; Manila, Philippines and the Far East.[9][10][11] By 1930, Edenton was working for American Export Lines, making mail and parcel runs to Mediterranean and Near Eastern destinations such as Casablanca, Morocco; Piraeus, Greece; Constanţa, Rumania and Constantinople, Turkey.[12][13]

The onset of the Great Depression in 1929–1930 substantially reduced international trade, and many mercantile vessels were laid up in this period due to lack of work. There is no record in readily available sources of Edenton's movements in the later 1930s, which indicates that she may have been one of those ships laid up.

World War II

USAT Irvin L. Hunt stranded in the Makassar Strait in 1941. The ship was refloated and served through the end of the war.

In February 1941, Edenton was acquired from the U.S. Maritime Commission by the War Department. Initially earmarked for Navy service and assigned the hull number AK-38, she was instead retained by the Army for use as a transport, and renamed USAT Irvin L. Hunt servicing the San Francisco—Honolulu—Manila route.[5][14][15]

During July 1941 the ship ran aground in the Makassar Strait, Netherlands East Indies.[14] The ship remained in Army service for the duration of the war, during which time she saw service in the Pacific Theater.[14] After the war, Irvin L. Hunt was retained by the Army until January 1947, when she was returned to the Maritime Commission as SS Edenton and placed in the reserve fleet at Astoria, Oregon.[14] Edenton was scrapped by Dulien Steel Products of Seattle, Washington in 1948.[6]

References

  1. 1 2 3 Pacific Ports Annual, pp. 64–65.
  2. 1 2 "General Cargo Ships Built in Pacific Coast Shipyards", shipbuildinghistory.com.
  3. 1 2 3 4 5 6 Dictionary of American Naval Fighting Ships: Edenton.
  4. 1 2 3 4 "Edenton", ellisisland.org.
  5. 1 2 Naval History And Heritage Command (10 September 2006). "USAT Irvin L. Hunt (Cargo Ship, 1941-1947)". Online Library of Selected Images: SHIPS of the UNITED STATES ARMY. Naval History And Heritage Command. Retrieved 7 November 2014.
  6. 1 2 McKellar, p. 325.
  7. The Ellis Island Ship Database – Edenton, ellisisland.org.
  8. "Two Vessels in Collision: American Steamer and French Schooner Crash in Mediterranean", New York Times, 30 March 1925 (subscription required).
  9. "Other 5", Los Angeles Times, 17 September 1928.
  10. "Shipping and Mails (2)", New York Times, 12 April 1929.
  11. "Shipping News and Activities at Los Angeles Harbor", Los Angeles Times, 27 August 1929.
  12. "Steamships", The Hartford Courant, 17 January 1930 (subscription required).
  13. "Steamships", The Hartford Courant, 30 April 1930 (subscription required).
  14. 1 2 3 4 Clay & 2011 v.2, p. 2158.
  15. Joseph M. Radigan 2014.

Bibliography

This article is issued from Wikipedia - version of the Monday, February 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.