Schreder HP-12A

HP-12A
Role Glider
National origin United States
Designer Richard Schreder
First flight 1978
Introduction 1978
Number built three


The Schreder HP-12A is an American homebuilt, mid-wing, V tailed, single-seat glider that was assembled out of various components all designed by Richard Schreder.[1][2]

The aircraft is often confused with a completely different aircraft, the Schreder HP-12.[2]

Design and development

The first HP-12A (HP stands for high performance) was built by a series of amateur sailplane builders, each contributing to the construction. It started off with Art Heabener of New Jersey constructing a rear fuselage from the plans for the original HP-12. The incomplete aircraft was then purchased by Tom Hall of Florida who built a set of HP-14 wings for it and then moved the incomplete aircraft to California and later to Illinois. It was in Illinois that Hall sold the still-incomplete aircraft to Rudy Kunda and Bill Carlson in 1977. They completed the aircraft in 1978.[1][2]

The finished aircraft retains the HP-12 rear fuselage and HP-14 wings and has added an HP-18 V-tail and the forward fuselage from an HP-10. Kunda indicated that he does not know why the Federal Aviation Administration identifies it as an HP-12A, but it is a 100% Schreder design.[1][2]

Operational history

In April 2011 the FAA registry listed three HP-12As.[3]

Specifications (HP-12A)

Data from Sailplane Directory and Soaring[1][2]

General characteristics

Performance

See also


References

  1. 1 2 3 4 Activate Media (2006). "HP-12A HP Aircraft, LLC". Retrieved 13 April 2011.
  2. 1 2 3 4 5 Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 19. Soaring Society of America, November 1983. USPS 499-920
  3. ↑ Federal Aviation Administration (April 2011). "Make / Model Inquiry Results". Retrieved 13 April 2011.
This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.