Seal (mechanical)
Compression seal example
A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage (e.g. in a plumbing system), containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets.
A stationary seal may also be referred to as 'packing'.
Seal types:
- Inflatable seal
- Induction sealing or cap sealing
- Adhesive, sealant
- Bodok seal, a specialized gas sealing washer for medical applications
- Bridgman seal, a piston sealing mechanism that creates a high pressure reservoir from a lower pressure source
- Bung
- Compression seal fitting
- Diaphragm seal
- Ferrofluidic seal
- Gasket or Mechanical packing
- Glass-to-metal seal
- Glass-ceramic-to-metal seals
- Heat seal
- Hose coupling, various types of hose couplings
- Hermetic seal
- Hydrostatic seal
- Hydrodynamic seal
- Inflatable seal Seals that inflate and deflate in three basic directions of operation: the axial direction, the radial-in direction, and the radial-out direction. Each of these inflation directions has their own set of performance parameters for measurements such as the height of inflation and the center-line bend radius that the seal can negotiate. Inflatable seals can be used for numerous applications with difficult sealing issues.
- Labyrinth seal A seal which creates a tortuous path for the liquid to flow through
- Lid (container)
- Rotating face mechanical seal
- Face seal
- Plug
- Radial shaft seal
- Trap (plumbing) (siphon trap)
- Stuffing box (mechanical packing)
- Wiper seal
- Dry gas seal
See also
 |
Wikimedia Commons has media related to Seals (mechanical). |
References
This article is issued from Wikipedia - version of the Thursday, February 25, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.