Self-ionization of water

The self-ionization of water (also autoionization of water, and autodissociation of water) is an ionization reaction in pure water or an aqueous solution, in which a water molecule, H2O, deprotonates (loses the nucleus of one of its hydrogen atoms) to become a hydroxide ion, OH. The hydrogen nucleus, H+, immediately protonates another water molecule to form hydronium, H3O+. It is an example of autoprotolysis, and exemplifies the amphoteric nature of water.

Equilibrium constant

Chemically pure water has an electrical conductivity of 0.055 µS/cm. According to the theories of Svante Arrhenius, this must be due to the presence of ions. The ions are produced by the self-ionization reaction

H2O + H2O H3O+ + OH

This equilibrium applies to pure water and any aqueous solution.

Expressed with activities a, instead of concentrations, the thermodynamic equilibrium constant for the water ionization reaction is:

K_{\rm eq} = \frac{a_{\rm{H_3O^+}} \cdot a_{\rm{OH^-}}}{a_{\rm{H_2O}}^2}

which is numerically equal to the more traditional thermodynamic equilibrium constant written as:

K_{\rm eq} = \frac{a_{\rm{H^+}} \cdot a_{\rm{OH^-}}}{a_{\rm{H_2O}}}

under the assumption that the sum of the chemical potentials of H+ and H3O+ is formally equal to twice the chemical potential of H2O at the same temperature and pressure.[1]

Because most acid–base solutions are typically very dilute, the activity of water is generally approximated as being equal to be unity, which allows the ionic product of water to be expressed as:[2]

K_{\rm eq}=a_{\rm{H_3O^+}} \cdot a_{\rm{OH^-}}

In dilute aqueous solutions, the activities of the solute particles are approximately equal to their concentrations. Thus, the ionization constant, dissociation constant, self-ionization constant, or ionic product of water, symbolized by Kw, may be given by:

K_{\rm w}=[{\rm{H_3O^+}}][{\rm{OH^-}}]

where [H3O+] is the concentration of hydrogen or hydronium ion, and [OH] is the concentration of hydroxide ion.

At 25 °C Kw is equal to 1.0×10−14. Note that as with all equilibrium constants, the result is dimensionless because the concentration is in fact a concentration relative to the standard state, which for H+ and OH- are both defined to be 1 Molar.

We can also define pKw = −log10 Kw = 14 at 25 °C. This is analogous to the notations pH and pKa for an acid dissociation constant, where the symbol p denotes a cologarithm. The logarithmic form of the equilibrium constant equation is pKw = pH + pOH.

Dependence on temperature, pressure and ionic strength

Temperature dependence of the water ionization constant at 25 MPa
Pressure dependence of the water ionization constant at 25 °C
Variation of pKw with ionic strength of NaCl solutions at 25 °C

The dependence of the water ionization on temperature and pressure has been investigated thoroughly.[3] The value of pKw decreases as temperature increases from the melting point of ice to a minimum at c. 250 °C, after which it increases up to the critical point of water c. 374 °C. It decreases with increasing pressure.

pKw values for liquid water.[4]
Temperature Pressure[5] pKw
0 °C 0.10 MPa 14.95
25 °C 0.10 MPa 13.99
50 °C 0.10 MPa 13.26
75 °C 0.10 MPa 12.70
100 °C 0.10 MPa 12.25
150 °C 0.47 MPa 11.64
200 °C 1.5 MPa 11.31
250 °C 4.0 MPa 11.20
300 °C 8.7 MPa 11.34
350 °C 17 MPa 11.92

With electrolyte solutions, the value of pKw is dependent on ionic strength of the electrolyte. Values for sodium chloride are typical for a 1:1 electrolyte. With 1:2 electrolytes, MX2, pKw decreases with increasing ionic strength.[6]

The value of Kw is usually of interest in the liquid phase. Example values for superheated steam (gas) and supercritical water fluid are given in the table.

Comparison of pKw values for liquid water, superheated steam, and supercritical water.[1]
Temp.
Pressure
350 °C 400 °C 450 °C 500 °C 600 °C 800 °C
0.1 MPa 11.920 (liquid)a 47.961b 47.873b 47.638b 46.384b 40.785b
25 MPa 11.551 (liquid)c 16.56618.13518.75819.42520.113
100 MPa 10.600 (liquid)c 10.74411.00511.38112.29613.544
1000 MPa 8.311 (liquid)c 8.1788.0848.0197.9527.957
Notes to the table. The values are for supercritical fluid except those marked: a at saturation pressure corresponding to 350 °C. b superheated steam. c subcooled liquid.

Isotope effects

Heavy water, D2O, self-ionizes less than normal water, H2O;

D2O + D2O D3O+ + OD

This is attributed to oxygen forming a slightly stronger bond to deuterium because the larger mass of deuterium results in a lower zero-point energy, a quantum mechanical effect analogous to the kinetic isotope effect.

Expressed with activities a, instead of concentrations, the thermodynamic equilibrium constant for the heavy water ionization reaction is:

K_{\rm eq} = \frac{a_{\rm{D_3O^+}} \cdot a_{\rm{OD^-}}}{a_{\rm{D_2O}}^2}

Assuming the activity of the D2O to be 1, and assuming that the activities of the D3O+ and OD are closely approximated by their concentrations

K_{\rm w}=[{\rm{D_3O^+}}][{\rm{OD^-}}]

The following table compares the values of pKw for H2O and D2O.[7]

pKw values for pure water
T/°C 1020 2530 40 50
H2O 14.535 14.167 13.997 13.830 13.535 13.262
D2O 15.43915.04914.86914.69914.385 14.103

Ionization equilibria in water–heavy water mixtures

In water–heavy water mixtures equilibria several species are involved: H2O, HDO, D2O, H3O+, D3O+, H2DO+, HD2O+, HO, DO.

Mechanism

The rate of reaction for the ionization

2 H2O → H3O+ + OH

depends on the activation energy, ΔE. According to the Boltzmann distribution the proportion of water molecules that have sufficient energy, due to thermal population, is given by

\frac{N}{N_0} = e^{-\frac{\Delta E^\ddagger}{kT}}

where k is the Boltzmann constant. Thus some dissociation can occur because sufficient thermal energy is available. The following sequence of events has been proposed on the basis of electric field fluctuations in liquid water.[8] Random fluctuations in molecular motions occasionally (about once every 10 hours per water molecule[9]) produce an electric field strong enough to break an oxygen–hydrogen bond, resulting in a hydroxide (OH) and hydronium ion (H3O+); the hydrogen nucleus of the hydronium ion travels along water molecules by the Grotthuss mechanism and a change in the hydrogen bond network in the solvent isolates the two ions, which are stabilized by solvation. Within 1 picosecond, however, a second reorganization of the hydrogen bond network allows rapid proton transfer down the electric potential difference and subsequent recombination of the ions. This timescale is consistent with the time it takes for hydrogen bonds to reorientate themselves in water.[10][11][12]

The inverse recombination reaction

H3O+ + OH → 2 H2O

is among the fastest chemical reactions known, with a reaction rate constant of 1.3×1011 M−1 s−1 at room temperature. Such a rapid rate is characteristic of a diffusion-controlled reaction, in which the rate is limited by the speed of molecular diffusion.[13]

Relationship with the neutral point of water

Water molecules dissociate into equal amounts of H3O+ and OH, so their concentrations are equal to 1.00×10−7 mol dm−3 at 25 °C. A solution in which the H3O+ and OH concentrations equal each other is considered a neutral solution. In general, the pH of the neutral point is numerically equal to 1/2pKw.

Pure water is neutral, but most water samples contain impurities. If an impurity is an acid or base, this will affect the concentrations of hydronium ion and hydroxide ion. Water samples which are exposed to air will absorb the acid carbon dioxide and the concentration of H3O+ will increase. The concentration of OH will decrease in such a way that the product [H3O+][OH] remains constant for fixed temperature and pressure. Thus these water samples will be slightly acidic.

See also

References

  1. 1 2 "Release on the Ionization Constant of H2O" (PDF). Lucerne: The International Association for the Properties of Water and Steam. August 2007.
  2. IUPAC, Compendium of Chemical Terminology, 2nd ed. (the "Gold Book") (1997). Online corrected version:  (2006) "autoprotolysis constant".
  3. International Association for the Properties of Water and Steam (IAPWS)
  4. Bandura, Andrei V.; Lvov, Serguei N. (2006). "The Ionization Constant of Water over Wide Ranges of Temperature and Density" (PDF). Journal of Physical and Chemical Reference Data 35 (1): 15–30. doi:10.1063/1.1928231.
  5. 0.1 MPa for T < 100 °C. Saturation pressure for T > 100 °C.
  6. Harned, H. S.; Owen,, B. B. (1958). The Physical Chemistry of Electrolytic Solutions (3rd ed.). New York: Reinhold. pp. 634–649, 752–754.
  7. Lide, D. R., ed. (1990). CRC Handbook of Chemistry and Physics (70th ed.). Boca Raton (FL):CRC Press.
  8. Geissler, P. L.; Dellago, C.; Chandler, D.; Hutter, J.; Parrinello, M. (2001). "Autoionization in liquid water". Science 291 (5511): 2121–2124. Bibcode:2001Sci...291.2121G. doi:10.1126/science.1056991. PMID 11251111.
  9. Eigen, M.; De Maeyer, L. (1955). "Untersuchungen über die Kinetik der Neutralisation I" [Investigations on the kinetics of neutralization I]. Z. Elektrochem. 59: 986.
  10. Stillinger, F. H. (1975). "Theory and Molecular Models for Water". Adv. Chem. Phys. 31: 1. doi:10.1002/9780470143834.ch1.
  11. Rapaport, D. C. (1983). "Hydrogen bonds in water". Mol. Phys. 50 (5): 1151. Bibcode:1983MolPh..50.1151R. doi:10.1080/00268978300102931.
  12. Chen, S.-H.; Teixeira, J. (1986). "Structure and Dynamics of Low-Temperature Water as Studied by Scattering Techniques". Adv. Chem. Phys. 64: 1. doi:10.1002/9780470142882.ch1.
  13. Tinoco, I.; Sauer, K.; Wang, J. C. (1995). Physical Chemistry: Principles and Applications in Biological Sciences (3rd ed.). Prentice-Hall. p. 386.

External links

This article is issued from Wikipedia - version of the Wednesday, May 04, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.