Sender Policy Framework

Sender Policy Framework (SPF) is a simple email-validation system designed to detect email spoofing by providing a mechanism to allow receiving mail exchangers to check that incoming mail from a domain comes from a host authorized by that domain's administrators.[1] The list of authorized sending hosts for a domain is published in the Domain Name System (DNS) records for that domain in the form of a specially formatted TXT record. Email spam and phishing often use forged "from" addresses, so publishing and checking SPF records can be considered anti-spam techniques.

IETF publication RFC 7208 defines Sender Policy Framework.

History

The first public mention of the concept was in 2000 but went mostly unnoticed.[2] No mention was made of the concept again until a first attempt at an SPF-like specification was published in 2002 on the IETF "namedroppers" mailing list by Dana Valerie Lank (née Green), who was unaware of the 2000 mention of the idea. The very next day, Paul Vixie posted his own SPF-like specification on the same list. These posts ignited a lot of interest, and eventually led to the forming of the IETF Anti-Spam Research Group (ASRG) and their mailing list, where the SPF idea was debated among a subscriber base that seemed to grow exponentially day by day. Among the proposals submitted to the ASRG were "Reverse MX" by Hadmut Danisch, and "Designated Mailer Protocol" by Gordon Fecyk.[3]

In June 2003, Meng Weng Wong merged the RMX and DMP specifications[4] and solicited suggestions from other programmers. Over the next six months, a large number of changes were made and a large community had started working on SPF.[5]

Originally SPF stood for Sender Permitted From and was sometimes also called SMTP+SPF, but its name was changed to Sender Policy Framework in February 2004.

In early 2004, the IETF created the MARID working group and tried to use SPF and Microsoft's CallerID proposal as the basis for what is now known as Sender ID.

After the collapse of MARID, the SPF community returned to the original "classic" version of SPF. In July 2005, this version of the specification was approved by the IESG as an IETF experiment, inviting the community to observe SPF during the two years following publication. On April 28, 2006, the SPF RFC was published as experimental RFC 4408.

Principles of operation

Further information: Sender Rewriting Scheme (SRS)

The Simple Mail Transfer Protocol permits any computer to send email claiming to be from any source address. This is exploited by spammers who often use forged email addresses, making it more difficult to trace a message back to its source, and easy for spammers to hide their identity in order to avoid responsibility. It is also used in phishing techniques, where users can be duped into disclosing private information in response to an email purportedly sent by an organization such as a bank.

SPF allows the owner of an Internet domain to specify which computers are authorized to send mail with "from" addresses in that domain, using Domain Name System (DNS) records. Receivers verifying the SPF information in TXT records may reject messages from unauthorized sources before receiving the body of the message. Thus, the principles of operation are similar to those of DNS-based blackhole lists (DNSBL), except that SPF uses the authority delegation scheme of the Domain Name System. Current practice requires the use of TXT records,[6] just as early implementations did. For a while a new record type (SPF, type 99) was registered and made available in common DNS software. Use of TXT records for SPF was intended as a transitional mechanism at the time. The experimental RFC, RFC 4408, section 3.1.1, suggested "an SPF-compliant domain name SHOULD have SPF records of both RR types".[7] The proposed standard, RFC 7208, says "use of alternative DNS RR types was supported in SPF's experimental phase but has been discontinued".[6]

The "from" address is transmitted at the beginning of the SMTP dialog. If the server rejects the domain, the unauthorized client should receive a rejection message, and if that client was a relaying message transfer agent (MTA), a bounce message to the original from address may be generated. If the server accepts the domain, and subsequently also accepts the recipients and the body of the message, it should insert a Return-Path field in the message header in order to save the from address. While the address in the Return-Path often matches other originator addresses in the mail header such as from, this is not necessarily the case, and SPF does not prevent forgery of these other addresses such as sender.

Spammers can send email with an SPF PASS result if they have an account in a domain with a sender policy, or abuse a compromised system in this domain. However, doing so makes the spammer easier to trace.

The main benefit of SPF is to the owners of e-mail addresses that are forged in the Return-Path. They receive large amounts of unsolicited error messages and other auto-replies. If such receivers use SPF to specify their legitimate source IP addresses and indicate FAIL result for all other addresses, receivers checking SPF can reject forgeries, thus reducing or eliminating the amount of backscatter.

SPF has potential advantages beyond helping identify unwanted mail. In particular, if a sender provides SPF information, then receivers can use SPF PASS results in combination with a white list to identify known reliable senders. Scenarios like compromised systems and shared sending mailers limit this use.

Reasons to implement

If a domain publishes an SPF record, spammers and phishers are less likely to forge e-mails pretending to be from that domain, because the forged e-mails are more likely to be caught in spam filters which check the SPF record. Therefore, an SPF-protected domain is less attractive to spammers and phishers. Because an SPF-protected domain is less attractive as a spoofed address, it is less likely to be blacklisted by spam filters and so ultimately the legitimate e-mail from the domain is more likely to get through.[8]

FAIL and forwarding

SPF breaks plain message forwarding. When a domain publishes an SPF FAIL policy, legitimate messages sent to receivers forwarding their mail to third parties may be rejected and/or bounced if all of the following occur:

  1. The forwarder does not rewrite the Return-Path, unlike mailing lists.
  2. The next hop does not whitelist the forwarder.
  3. This hop checks SPF.

This is a necessary and obvious feature of SPF – checks behind the "border" MTA (MX) of the receiver cannot work directly.

Publishers of SPF FAIL policies must accept the risk that their legitimate emails are being rejected or bounced. They should test (e.g., with a SOFTFAIL policy) until they are satisfied with the results. See below for a list of alternatives to plain message forwarding.

HELO tests

For an empty Return-Path as used in error messages and other auto-replies, an SPF check of the HELO-identity is mandatory.

With a bogus HELO identity the result NONE would not help, but for valid host names SPF also protects the HELO identity. This SPF feature was always supported as an option for receivers, and later SPF drafts including the final specification recommend to check the HELO always.

This allows receivers to white list sending mailers based on a HELO PASS, or to reject all mails after a HELO FAIL. It can also be used in reputation systems (any white or black list is a simple case of a reputation system).

Implementation

Compliance with SPF consists of three loosely related tasks:

Thus, the key issue in SPF is the specification for the new DNS information that domains set and receivers use. The records laid out below are in typical DNS syntax:

example.com. IN TXT "v=spf1 ip4:192.0.2.0/24 ip4:198.51.100.123 a -all"

"v=" defines the version of SPF used. The following words provide mechanisms to use to determine if a domain is eligible to send mail. The "ip4" and "a" specify the systems permitted to send messages for the given domain. The "-all" at the end specifies that, if the previous mechanisms did not match, the message should be rejected.

Mechanisms

Eight mechanisms are defined:

ALL Matches always; used for a default result like -all for all IPs not matched by prior mechanisms.
A If the domain name has an address record (A or AAAA) that can be resolved to the sender's address, it will match.
IP4 If the sender is in a given IPv4 address range, match.
IP6 If the sender is in a given IPv6 address range, match.
MX If the domain name has an MX record resolving to the sender's address, it will match (i.e. the mail comes from one of the domain's incoming mail servers).
PTR If the domain name (PTR record) for the client's address is in the given domain and that domain name resolves to the client's address (forward-confirmed reverse DNS), match. This mechanism is deprecated and should no longer be used.[6]
EXISTS If the given domain name resolves to any address, match (no matter the address it resolves to). This is rarely used. Along with the SPF macro language it offers more complex matches like DNSBL-queries.
INCLUDE References the policy of another domain. If that domain's policy passes, this mechanism passes. However, if the included policy fails, processing continues. To fully delegate to another domain's policy, the redirect extension must be used.

Qualifiers

Each mechanism can be combined with one of four qualifiers:

Modifiers

The modifiers allow for future extensions to the framework. To date only the two modifiers defined in the RFC 4408 have been widely deployed:

Error handling

As soon as SPF implementations detect syntax errors in a sender policy they must abort the evaluation with result PERMERROR. Skipping erroneous mechanisms cannot work as expected, therefore include:bad.example and redirect=bad.example also cause a PERMERROR.

Another safeguard is the maximum of ten mechanisms querying DNS, i.e. any mechanism except from IP4, IP6, and ALL. Implementations can abort the evaluation with result SOFTERROR when it takes too long or a DNS query times out, but they must return PERMERROR if the policy directly or indirectly needs more than ten queries for mechanisms. Any redirect= also counts towards this processing limit.

A typical SPF HELO policy v=spf1 a -all may execute up to three DNS queries: (1) TXT, (2) SPF (obsoleted by RFC 7208), and (3) A or AAAA. This last query counts as the first mechanism towards the limit (10). In this example it is also the last, because ALL needs no DNS lookup.

Controversy

In 2004, Steven M. Bellovin wrote an e-mail discussing his concerns with SPF.[9] Some of these include:

There are other concerns about the impact of widespread use of SPF, notably the impact on various legitimate forms of email spoofing,[11] such as forwarding services, SMTP use by people with multiple identities, etc. (For example, a person who uses their home ISP's SMTP servers to send mail with their work email as the address.) On the other hand, many of these uses may be "expected" yet not "legitimate". To a certain extent this is more a question of ownership and expectations than a technical question.

The IETF spfbis working group, tasked with reworking the SPF specification aiming for "Proposed Standard" status in a new RFC, during April 2013 appeared to have reached consensus around deprecating SPF type 99 in favour of continued TXT record usage.[12] People from the DNSEXT working group strongly opposed this in a series of email threads on spfbis, dnsext, and IETF general discussion mailing lists.[13][14] The spfbis working group chair requested an end to that torrent of protest, since the discussion on the resource record type (RRTYPE) in the working group was terminated long ago,[15] a move that was seen as trying to silence the protests by some fierce DNS purists. An independent draft was proposed later, documenting how the spurious recursion to TXT records is characterized in the current Internet.[16]

Deployment

Anti-spam software such as SpamAssassin version 3.0.0 and ASSP implement SPF. Many mail transfer agents (MTAs) support SPF directly such as Courier, CommuniGate Pro, Wildcat, MDaemon, and Microsoft Exchange, or have patches or plug-ins available that support SPF, including Postfix, Sendmail, Exim, qmail, and Qpsmtpd.[17] As of 2013, more than seven million domains publish SPF FAIL -all policies.[18]

In August 2005 it was learned that EarthLink would refuse to allow hosted domains the ability to enter SPF records.[19]

In a survey published in 2007, 5% of the .com and .net domains had some kind of SPF policy. In 2009, a continuous survey run at Nokia Research reports that 51% of the tested domains specify an SPF policy.[20] These results can include trivial policies like v=spf1 ?all.[21] In April 2007, BITS, a division of the Financial Services Roundtable, published e-mail security recommendations for its members including SPF deployment.[22]

In 2008, the Messaging Anti-Abuse Working Group (MAAWG) published a paper about email authentication covering SPF, Sender ID, and DomainKeys Identified Mail (DKIM).[23] In their "Sender Best Communication Practices" the MAAWG stated: "At the very least, senders should incorporate SPF records for their mailing domains".[24]

See also

References

  1. ↑ "Sender Policy Framework: Introduction".
  2. ↑ "SPF: First Public Mention 2000". Retrieved 28 August 2014.
  3. ↑ "SPF: History/Pre-SPF". Retrieved 16 May 2009.
  4. ↑ For a comparison among RMX, DMP and SPF, see RMX and DMP compared on the historical openspf site.
  5. ↑ "SPF: History/SPF-2003". Retrieved 16 May 2009.
  6. 1 2 3 4 Scott Kitterman (April 2014). "DNS Resource Records". Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1. IETF. sec. 3.1. RFC 7208. https://tools.ietf.org/html/rfc7208#section-3.1. Retrieved 26 April 2014.
  7. ↑ Wong, M., and W. Schlitt. RFC 4408. April 2006 <http://tools.ietf.org/html/rfc4408>
  8. ↑ "Why should I implement a SPF record on my domain?". Email Manual. May 2009. Archived from the original on January 29, 2010. Retrieved 2010-01-01.
  9. ↑ Steve Bellovin expresses doubts (Jan 2004)
  10. ↑ "SPF Information". AOL Postmaster. Archived from the original on 2007-07-08. Retrieved 2007-10-04.
  11. ↑ "Problems with Designated Sender". Taughannock Networks. Retrieved 2009-12-16.
  12. ↑ Murray Kucherawy (July 2012). "Conclusions". Resolution of the Sender Policy Framework (SPF) and Sender ID Experiments. IETF. sec. 6. RFC 6686. https://tools.ietf.org/html/rfc6686#section-6. Retrieved 16 December 2013.
  13. ↑ S. Moonesamy (23 April 2013). "Obsoleting SPF RRTYPE". DNSEXT Discussion List. IETF. Retrieved 16 December 2013.
  14. ↑ Dan Schlitt (29 August 2013). "Last Call: <draft-ietf-spfbis-4408bis-19.txt> (Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, Version 1) to Proposed Standard". IETF Discussion List. IETF. Retrieved 16 December 2013.
  15. ↑ Andrew Sullivan (29 May 2013). "The RRTYPE topic". SPFBIS Discussion List. IETF. Retrieved 16 December 2013.
  16. ↑ John Klensin; Andrew SUllivan; Patrik Fältström (August 2013). An IANA Registry for Protocol Uses of Data with the DNS TXT RRTYPE. IETF. I-D draft-klensin-iana-txt-rr-registry. https://tools.ietf.org/html/draft-klensin-iana-txt-rr-registry. Retrieved 16 December 2013.
  17. ↑ "Qpsmtpd SPF plugin". 2013.
  18. ↑ "SPF -all Domain Survey". 2013. Retrieved 2013-04-23.
  19. ↑ "SPF Loses Mindshare". 2005. Retrieved 4 April 2011.
  20. ↑ "Nokia Research Report on SPF Adoption". Fit.Nokia.com. Nokia. 2011-09-19. Archived from the original on 2011-09-20. Retrieved 2016-04-05.
  21. ↑ Liu, Cricket (January 2007). "Handicapping New DNS Extensions and Applications". ONLamp. Retrieved 2007-10-04.
  22. ↑ "BITS Email Security Toolkit" (PDF). BITS. April 2007. Retrieved 2008-06-13.
  23. ↑ Crocker, Dave (March 2008). "Trust in Email Begins with Authentication" (PDF). MAAWG. Retrieved 2011-07-28.
  24. ↑ "MAAWG Sender Best Communications Practices Executive Summary" (PDF). MAAWG. 2011-10-07. Retrieved 2012-04-27.

External links

This article is issued from Wikipedia - version of the Wednesday, April 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.