Separation axiom

For the axiom of set theory, see Axiom schema of separation.
Illustrations of the properties of Hausdorffness, regularity and normality
An illustration of some of the separation axioms. A blue region indicates an open set, a red rectangle a closed set, and a black dot a point.

In topology and related fields of mathematics, there are several restrictions that one often makes on the kinds of topological spaces that one wishes to consider. Some of these restrictions are given by the separation axioms. These are sometimes called Tychonoff separation axioms, after Andrey Tychonoff.

The separation axioms are axioms only in the sense that, when defining the notion of topological space, one could add these conditions as extra axioms to get a more restricted notion of what a topological space is. The modern approach is to fix once and for all the axiomatization of topological space and then speak of kinds of topological spaces. However, the term "separation axiom" has stuck. The separation axioms are denoted with the letter "T" after the German Trennungsaxiom, which means "separation axiom."

The precise meanings of the terms associated with the separation axioms has varied over time, as explained in History of the separation axioms. It is important to understand the authors' definition of each condition mentioned to know exactly what they mean, especially when reading older literature.

Preliminary definitions

Before we define the separation axioms themselves, we give concrete meaning to the concept of separated sets (and points) in topological spaces. (Separated sets are not the same as separated spaces, defined in the next section.)

The separation axioms are about the use of topological means to distinguish disjoint sets and distinct points. It's not enough for elements of a topological space to be distinct (that is, unequal); we may want them to be topologically distinguishable. Similarly, it's not enough for subsets of a topological space to be disjoint; we may want them to be separated (in any of various ways). The separation axioms all say, in one way or another, that points or sets that are distinguishable or separated in some weak sense must also be distinguishable or separated in some stronger sense.

Let X be a topological space. Then two points x and y in X are topologically distinguishable if they do not have exactly the same neighbourhoods (or equivalently the same open neighbourhoods); that is, at least one of them has a neighbourhood that is not a neighbourhood of the other (or equivalently there is an open set that one point belongs to but the other point does not).

Two points x and y are separated if each of them has a neighbourhood that is not a neighbourhood of the other; that is, neither belongs to the other's closure. More generally, two subsets A and B of X are separated if each is disjoint from the other's closure. (The closures themselves do not have to be disjoint.) All of the remaining conditions for separation of sets may also be applied to points (or to a point and a set) by using singleton sets. Points x and y will be considered separated, by neighbourhoods, by closed neighbourhoods, by a continuous function, precisely by a function, if and only if their singleton sets {x} and {y} are separated according to the corresponding criterion.

Subsets A and B are separated by neighbourhoods if they have disjoint neighbourhoods. They are separated by closed neighbourhoods if they have disjoint closed neighbourhoods. They are separated by a continuous function if there exists a continuous function f from the space X to the real line R such that the image f(A) equals {0} and f(B) equals {1}. Finally, they are precisely separated by a continuous function if there exists a continuous function f from X to R such that the preimage f−1({0}) equals A and f−1({1}) equals B.

These conditions are given in order of increasing strength: Any two topologically distinguishable points must be distinct, and any two separated points must be topologically distinguishable. Any two separated sets must be disjoint, any two sets separated by neighbourhoods must be separated, and so on.

For more on these conditions (including their use outside the separation axioms), see the articles Separated sets and Topological distinguishability.

Main definitions

These definitions all use essentially the preliminary definitions above.

Many of these names have alternative meanings in some of mathematical literature, as explained on History of the separation axioms; for example, the meanings of "normal" and "T4" are sometimes interchanged, similarly "regular" and "T3", etc. Many of the concepts also have several names; however, the one listed first is always least likely to be ambiguous.

Most of these axioms have alternative definitions with the same meaning; the definitions given here fall into a consistent pattern that relates the various notions of separation defined in the previous section. Other possible definitions can be found in the individual articles.

In all of the following definitions, X is again a topological space.

Relationships between the axioms

The T0 axiom is special in that it can be not only added to a property (so that completely regular plus T0 is Tychonoff) but also subtracted from a property (so that Hausdorff minus T0 is R1), in a fairly precise sense; see Kolmogorov quotient for more information. When applied to the separation axioms, this leads to the relationships in the table below:

T0 version Non-T0 version
T0 (No requirement)
T1 R0
Hausdorff (T2) R1
T (No special name)
Completely Hausdorff (No special name)
Regular Hausdorff (T3) Regular
Tychonoff (T) Completely regular
Normal T0 Normal
Normal Hausdorff (T4) Normal regular
Completely normal T0 Completely normal
Completely normal Hausdorff (T5) Completely normal regular
Perfectly normal T0 Perfectly normal
Perfectly normal Hausdorff (T6) Perfectly normal regular

In this table, you go from the right side to the left side by adding the requirement of T0, and you go from the left side to the right side by removing that requirement, using the Kolmogorov quotient operation. (The names in parentheses given on the left side of this table are generally ambiguous or at least less well known; but they are used in the diagram below.)

Other than the inclusion or exclusion of T0, the relationships between the separation axioms are indicated in the following diagram:

In this diagram, the non-T0 version of a condition is on the left side of the slash, and the T0 version is on the right side. Letters are used for abbreviation as follows: "P" = "perfectly", "C" = "completely", "N" = "normal", and "R" (without a subscript) = "regular". A bullet indicates that there is no special name for a space at that spot. The dash at the bottom indicates no condition.

You can combine two properties using this diagram by following the diagram upwards until both branches meet. For example, if a space is both completely normal ("CN") and completely Hausdorff ("CT2"), then following both branches up, you find the spot "•/T5". Since completely Hausdorff spaces are T0 (even though completely normal spaces may not be), you take the T0 side of the slash, so a completely normal completely Hausdorff space is the same as a T5 space (less ambiguously known as a completely normal Hausdorff space, as you can see in the table above).

As you can see from the diagram, normal and R0 together imply a host of other properties, since combining the two properties leads you to follow a path through the many nodes on the rightside branch. Since regularity is the most well known of these, spaces that are both normal and R0 are typically called "normal regular spaces". In a somewhat similar fashion, spaces that are both normal and T1 are often called "normal Hausdorff spaces" by people that wish to avoid the ambiguous "T" notation. These conventions can be generalised to other regular spaces and Hausdorff spaces.

Other separation axioms

There are some other conditions on topological spaces that are sometimes classified with the separation axioms, but these don't fit in with the usual separation axioms as completely. Other than their definitions, they aren't discussed here; see their individual articles.

See also

Sources

  1. Schechter, p. 441
  2. Schechter, p. 443

External links

This article is issued from Wikipedia - version of the Thursday, July 02, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.