Set-in neck

Set-in neck is a method of guitar (or similar stringed instrument) construction that involves joining neck and body with a tightly fitted mortise-and-tenon or dovetail joint, secured with some sort of adhesive. It is a common belief that this yields a stronger body-to-neck connection than a bolt-on neck, though some luthiers believe a well-executed bolt-on neck joint is equally strong and provides similar neck-to-body contact. However, neither of these joints is as strong as a neck-through body construction, which requires more material and is usually only on high-end solid body guitars.

Set-in necks are the most popular on acoustic guitars. Almost all major acoustic guitar manufacturers use set-in necks, with notable exceptions being Taylor Guitars and Collings Guitars. In the electric guitar market, Gibson produces almost all of its electric offerings as set-in neck models—as opposed to Fender, which builds most of its electric instruments with bolt-on necks. In rare cases, maker use other solutions. Babicz Guitars makes a mechanically joined neck that can be "wound" up or down to adjust action height.

Glues

Wooden musical instrument construction relies on four widely used types of glues:

• Hide glue
• PVA ("white glue" and "yellow glue")
• Epoxy and Cyanoacrylate (less common because they make it difficult to disassemble the joint for repair)

Advantages

Typically cited advantages of set-in neck include:

• Warmer tone
• Often, better access to top frets compared bolt-on necks that use a metal plate

Disadvantages

• Certain models seem prone to neck breakage, though this may be due to weaker neck wood (mahogany instead of maple).
• Harder and more expensive to mass manufacture than bolt-on necks—harder to repair or service because the glue must be steamed or melted with a hot knife
• The player has no control over the neck-to-body angle; changing it requires disassembling the instrument and re-glueing the neck by an experienced luthier

References

• Glue comparison chart on frets.com