Shim (spacer)

Mounting a tile spacer

A shim is a thin and often tapered or wedged piece of material, used to fill small gaps or spaces between objects.[1] Shims are typically used in order to support, adjust for better fit, or provide a level surface. Shims may also be used as spacers to fill gaps between parts subject to wear.

Materials

Many materials make suitable shim stock (also often styled shimstock), or base material, depending on the context: wood, stone, plastic, metal, or even paper (e.g., when used under a table leg to level the table surface). High quality shim stock can be bought commercially, for example as laminated shims, but shims are often created ad hoc from whatever material is immediately available.

Laminated shim stock is stacked foil that can be peeled off one layer at a time to adjust the thickness of the shim.

Applications

In automobiles, shims are commonly used to adjust the clearance or space between two parts. For example, shims are inserted into or under bucket tappets to control valve clearances. Clearance is adjusted by changing the thickness of the shim.

In Assembly and Weld Fixtures precision metal shims are used between two parts so that the final production parts are created within the product drawing's specified tolerances. [2]

In carpentry, small pieces of wood may be used to align gaps between larger timbers. In luthiery, shims made of various materials are often used to adjust neck alignment and can be used beneath a nut or saddle to raise the height of either. In masonry, small stones may be used to align or fill gaps between larger bricks or slabs. Special CPU shims are used to protect the central processing unit when installing a heat sink.

In Nuclear magnetic resonance spectroscopy, "Shimming an NMR Magnet" is a procedure to generate homogeneous magnetic field along the sample volume to obtain pure lorentzian line shapes of various resonances in the spectrum. This is accomplished by manual shimming of individual shims, or automatic shimming procedure. [3]

See also

References

  1. Definition in Merriam-Webster Dictionary: http://www.merriam-webster.com/dictionary/shim
  2. Designing for Tolerance Variations in Product Parts. Weld Fixture Design 101
  3. "Shimming an NMR Magnet", http://gtfg4.chem.upenn.edu/nmrsite/nmrdw/pdf%20files/Shimming.pdf

Further reading

This article is issued from Wikipedia - version of the Monday, October 12, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.