Shocks and discontinuities (magnetohydrodynamics)

Shocks and discontinuities are transition layers where the plasma properties change from one equilibrium state to another. The relation between the plasma properties on both sides of a shock or a discontinuity can be obtained from the conservative form of the magnetohydrodynamic (MHD) equations, assuming conservation of mass, momentum, energy and of  \nabla \cdot \mathbf{B} .

Rankine-Hugoniot jump conditions for MHD

The jump conditions across a time-independent MHD shock or discontinuity are referred as the Rankine-Hugoniot equations for MHD. In the frame moving with the shock/discontinuity, those jump conditions can be written:

 \rho_1 v_{n1} = \rho_2 v_{n2},
 B_{n1} = B_{n2},
 \rho_1 v_{n1}^2+ p_1 + \frac{B_{t1}^2}{2 \mu_0}=\rho_2 v_{n2}^2+ p_2 + \frac{B_{t2}^2}{2 \mu_0},
  \rho_1 v_{n1} \mathbf{v_{t1}} - \frac{\mathbf{B_{t1}}B_{n1}}{\mu_0}= \rho_2 v_{n2} \mathbf{v_{t2}} - \frac{\mathbf{B_{t2}}B_{n2}}{\mu_0},
 \left(\frac{\gamma}{\gamma-1}\frac{p_1}{\rho_1}+\frac{v_1^2}{2}\right)\rho_1 v_{n1}+\frac{v_{n1} B_{t1}^2}{\mu_0}-\frac{B_{n1}(\mathbf{B_{t1}}\cdot \mathbf{v_{t1}})}{\mu_0}=\left(\frac{\gamma}{\gamma-1}\frac{p_2}{\rho_2}+\frac{v_2^2}{2}\right)\rho_2 v_{n2}+\frac{v_{n2} B_{t2}^2}{\mu_0}-\frac{B_{n2}(\mathbf{B_{t2}}\cdot \mathbf{v_{t2}})}{\mu_0},
 (\mathbf{v} \times \mathbf{B})_{t1} =  (\mathbf{v} \times \mathbf{B})_{t2},

where  \rho, v, p, B are the plasma density, velocity, (thermal) pressure and magnetic field respectively. The subscripts t and n refer to the tangential and normal components of a vector (with respect to the shock/discontinuity front). The subscripts 1 and 2 refer to the two states of the plasma on each side of the shock/discontinuity

Contact and tangential discontinuities

Contact and tangential discontinuities are transition layers across which there is no particle transport. Thus, in the frame moving with the discontinuity,  v_{n1} = v_{n2} =0.

Contact discontinuities are discontinuities for which the thermal pressure, the magnetic field and the velocity are continuous. Only the mass density and temperature change.

Tangential discontinuities are discontinuities for which the total pressure (sum of the thermal and magnetic pressures) is conserved. The normal component of the magnetic field is identically zero. The density, thermal pressure and tangential component of the magnetic field vector can be discontinuous across the layer.

Shocks

Shocks are transition layers across which there is a transport of particles. There are three types of shocks in MHD: slow-mode, intermediate and fast-mode shocks.

Intermediate shocks are non-compressive (meaning that the plasma density does not change across the shock). A special case of the intermediate shock is referred to as a rotational discontinuity. They are isentropic. All thermodynamic quantities are continuous across the shock, but the tangential component of the magnetic field can "rotate". Intermediate shocks in general however, unlike rotational discontinuities, can have a discontinuity in the pressure.

Slow-mode and fast-mode shocks are compressive and are associated with an increase in entropy. Across slow-mode shock, the tangential component of the magnetic field decreases. Across fast-mode shock it increases.

The type of shocks depend on the relative magnitude of the upstream velocity in the frame moving with the shock with respect to some characteristic speed. Those characteristic speeds, the slow and fast magnetosonic speeds, are related to the Alfvén speed,  V_A and the sonic speed,  c_s as follows:

a_{\mathrm{slow}}^2 = \frac{1}{2} \left[\left(c_s^2 + V_A^2\right)-\sqrt{\left(c_s^2+V_A^2\right)^2-4c_s^2V_{A}^2 \cos^{2} \theta_{Bn}}\,\right],
 a_{\mathrm{fast}}^2 = \frac{1}{2} \left[\left(c_s^2 + V_A^2\right)+\sqrt{\left(c_s^2+V_A^2\right)^2-4c_s^2V_{A}^2 \cos^{2} \theta_{Bn}}\,\right],

where V_{A} is the Alfvén speed and \theta_{Bn} is the angle between the incoming magnetic field and the shock normal vector.

The normal component of the slow shock propagates with velocity a_{\mathrm{slow} } in the frame moving with the upstream plasma, that of the intermediate shock with velocity V_{An} and that of the fast shock with velocity a_{\mathrm{fast}}. The fast mode waves have higher phase velocities than the slow mode waves because the density and magnetic field are in phase, whereas the slow mode wave components are out of phase.

Example of shocks and discontinuities in space

See also

References

The original research on MHD shock waves can be found in the following papers.

Textbook references.

  1. H. E. Petschek, Magnetic Field Annihilation in The Physics of Solar Flares, Proceedings of the AAS-NASA Symposium held 28–30 October 1963 at the Goddard Space Flight Center, Greenbelt, MD. Edited by Wilmot N. Hess. Washington, DC: National Aeronautics and Space Administration, Science and Technical Information Division, 1964., p.425
  2. Magnetopause Belgian Institute for Space Aeronomy
  3. S. Mancuso et al., UVCS/SOHO observations of a CME-driven shock: Consequences on ion heating mechanisms behind a coronal shock, Astronomy and Astrophysics, 2002, v.383, p.267-274
This article is issued from Wikipedia - version of the Tuesday, March 10, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.