Silicon sulfide

Silicon sulfide
Names
IUPAC name
silicon(IV) sulfide
Other names
silicon disulfide
Identifiers
13759-10-9 N
ChemSpider 75527 YesY
Jmol 3D model Interactive image
PubChem 83705
Properties
SiS2
Molar mass 92.218 g/mol
Appearance White (samples are sometimes grey or brown) needles.
Rotten egg smell in moist air.
Density 1.853 g/cm3
Melting point 1,090 °C (1,990 °F; 1,360 K) sublimes
Decomposes
Structure
Orthorhombic, oI12
Ibam, No.72[1]
Tetrahedral
Hazards
NFPA 704
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g., diesel fuel Health code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g., chloroform Reactivity code 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g., fluorine Special hazards (white): no codeNFPA 704 four-colored diamond
2
2
3
Related compounds
Other anions
silicon dioxide
Other cations
carbon disulfide
germanium disulfide
tin(IV) sulfide
lead(IV) sulfide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Silicon sulfide is the inorganic compound with the formula SiS2. Like the silicon dioxide, this material is polymeric, but it adopts a 1-dimensional structure quite different from the usual forms of SiO2.

Synthesis, structure, and properties

The material is formed by heating silicon and sulfur or by the exchange reaction between SiO2 and Al2S3. The material consists of chains of edge-shared tetrahedra, Si(μ-S)2Si(μS)2, etc.[2]


Like other silicon sulfur-compounds (e.g., bis(trimethylsilyl)sulfide) SiS2 hydrolyzes readily to release H2S. In liquid ammonia it is reported to form the imide Si(NH)2 and NH4SH,[3] but a recent report has identified crystalline (NH4)2[SiS3(NH3)]·2NH3 as a product which contains the tetrahedral thiosilicate anion, SiS3(NH3).[4]

Reaction with ethanol gives the alkoxide, tetraethyl orthosilicate and H2S.[3] Reaction with sodium sulfide, magnesium sulfide and aluminum sulfide give thiosilicates.[3]

SiS2 is claimed to occur in certain interstellar objects.[5]

References

  1. Weiss, A.; Weiss, A. (1954). "Über Siliciumchalkogenide. VI. Zur Kenntnis der faserigen Siliciumdioxyd-Modifikation". Zeitschrift für Anorganische und Allgemeine Chemie 276 (1–2): 95–112. doi:10.1002/zaac.19542760110.
  2. Holleman, A. F.; Wiberg, E. (2001). Inorganic Chemistry. San Diego: Academic Press. ISBN 0-12-352651-5. A printing error in this book states that rSiSi is 214 picometers, when in fact that distance describes rSiS.
  3. 1 2 3 Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. p. 359. ISBN 0-08-022057-6.
  4. Meier, Martin; Korber, Nikolaus (2009). "The first thiosilicate from solution: synthesis and crystal structure of (NH4)2[SiS3(NH3)]·2NH3". Dalton Transactions (9): 1506. doi:10.1039/b818856d. ISSN 1477-9226.
  5. Goebel, J. H. (1993). "SiS2 in Circumstellar Shells" (PDF). Astronomy and Astrophysics 278 (1): 226–230. Bibcode:1993A&A...278..226G.
This article is issued from Wikipedia - version of the Monday, April 18, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.