Sixtymile Formation

Sixtymile Formation
Stratigraphic range: NeoProterozoic, less than 742 Ma[1]

Sixtymile Formation in Grand Canyon
Type Geological formation
Unit of Grand Canyon Supergroup
Underlies Tonto Group separated by Great Unconformity
Overlies Chuar Group
Thickness 120 feet (37 m), at maximum
Lithology
Primary siltstone and sandstone
Other intraformational breccia
Location
Region The Chuar syncline, Grand Canyon, northern Arizona.
Country United States of America
Type section
Named by Ford et al. (1972),[2] Ford and Breed (1973),[3] and Elston (1979)[4]

The Sixtymile Formation is the uppermost unit of the Grand Canyon Supergroup. It is a very thin accumulation of sandstone, siltstone, and breccia that is exposed in only four places in the Chuar Valley. These exposures occur atop Nankoweap Butte and within Awatubi and Sixtymile Canyons in the eastern Grand Canyon, Arizona. The maximum preserved thickness of the Sixtymile Formation is about 60 meters (200 ft). The actual depositional thickness of the Sixtymile Formation is unknown owing to erosion during the formation of the Great Unconformity and prior to deposition of the Tapeats Sandstone.[5]

Sixtymile Formation and the underlying Chuar Group are preserved only in a broad asymmetric fold comprising called the Chuar syncline. The Chuar syncline is a doubly plunging fold, which means that along the hingeline within the axis of the syncline, beds in some areas (Nankoweap Canyon) dip toward the south, and in other areas (Lava Chuar Canyon) beds dip toward the north. The Sixtymile Formation, Chuar Group, and Chuar syncline is bounded on the east by the Butte fault zone and on all other sides by the Great Unconformity and overlying Tapeats Sandstone. The hingeline of the Chuar syncline parallels the trace of the Butte fault, suggesting a genetic relationship between the syncline and the fault.[5]

In descending order, the Sixtymile Formation is underlain by the Chuar group, Nankoweap Formation, and the Unkar Group. The Unkar Group lies unconformably overlies deeply eroded granites, gneisses, pegmatites, and schists of the Vishnu basement rocks.. The Nankoweap and Sixtymile formations together with the Chuar and Unkar groups comprise the Grand Canyon Supergroup.[5]

Nomenclature

The Sixty Mile Formation of Chuar Group was first recognized by Ford and Breed (1972).[2] It was formally named the Sixty Mile Formation, upper formation of Chuar Group of Grand Canyon Supergroup by Ford and Breed (1973).[3] They designated the type section of the Sixtymile Formation to be outcrops of breccia and sandstone on cliffs on the north side of the upper part of Sixtymile Canyon. Later it was changed to Sixtymile Formation of Chuar Group of Grand Canyon Supergroup and its spelling changed to Sixtymile.[4]

Description

The Sixtymile Formation is typically subdivided into three informal members. They are (1) a lower red siltstone, sandstone, and breccia member; (2) a middle cherty quartzite member; and (3) an upper breccia-bearing sandstone and conglomerate member. The lower member, which is 22 22 meters (72 ft) to 27 meters (89 ft) thick, consists of beds of a heterogeneous mixture of laminated hematitic sandstone; thin-bedded micaceous sandstone containing rock fragments; monomict and polymict breccia; crudely bedded sandstone; and thin-bedded soft sandy siltstone. Individual beds are discontinuous and local in extent and often grade into each other. Blocks of dolomite from the underlying Walcott Member often occur in the lower member.[4][6]

The Middle Member. which is about 25 meters (82 ft) thick, of the Sixtymile Formation consists of thin bedded, finely laminated, very fine grained cherty quartzite. The laminated quartzite of Middle Member is folded on a moderately large scale. The thin beds and laminations of it are crinkled in a manner that reflects slumping of the member toward the axis of the Chuar syncline. Chert is common to abundant within the Middle Member. The middle of this member contains numerous thin discontinuous beds of chalky-white chert. The lower part of the Middle Member is purplish red, which grades upward to a creamy mottled and streaked red. This member is resistant to erosion and characteristically forms cliffs. This member forms small hills within the Great Unconformity on either side of the Chuar syncline. The upper contact of the Middle Member with the overlying Upper Member is sharp and unconformable. The basal sandstones of the Upper Member cut about 1.5 meters (4.9 ft) into the beds of the middle member. In inaccessible exposures, conglomerate of the Upper Member appears to unconformably overlies the middle member.[4][6]

The Upper Member of the Sixtymile Formation, which is about 12 meters (39 ft), consists of fine-grained fluvial and fanglomeratic sandstone that grades abruptly into sandy conglomerate toward the axis of the syncline. It is only ipreserved in a narrow trough-shaped area in the center of the Chuar syncline. The sandstone is pale red to brown, and contains scattered rock fragments. These rock fragments include chalky-white chert derived from the middle member. Some of the sandstone exhibits fluvial crossbedding and is fanglomeratic. Massive weathering maroon conglomerate is present in the lower part of the Upper Member. It grades laterally into the sandstone.[4][6]

Contacts

The basal contact of the Walcott Member with the overlying Sixtymile Formation is conformable. Typically, the contact between the underlying black shale typical of the Walcott and overlying basal red sandstones of the Sixtymile Formation consists of a 1.5 meters (4.9 ft)interval that is gradational in nature. The transition beds and the basal laminated red sandstone of the Sixtymile Formation lack any fragmental or exotic debris, unlike the overlying strata. These field relations thus indicate that deposition was continuous across the Chuar Group-Sixtymile boundary.[4][5][6]

The upper contact, which is part of the Great Unconformity, of the Sixtymile Formation is a disconformity that laterally becomes an angular unconformity. Within the center of Chuar syncline, this upper contact is a disconformity. Away from the center, the strata of the Sixtymile Formation an angular discordance between the formations of 6° to 10° can be seen. The Great Unconformity has an irregular hilly surface. In case of the Sixtymile Formation, a small amount of relief, 20 meters (66 ft) to 30 meters (98 ft), in the Sixtymile Canyon area was the result of resistance to erosion of the Middle Member of the Sixtymile Formation (fig. 4). Prior to the deposition of the Tapeats Sandstone, erosion removed all of the Upper Member of the Sixtymile from all but the central part of the Chuar syncline.[4][5][6]

Fossils

No fossils have been reported from the Sixtymile Formation.[4][5][6]

Depositional Environment

The strata of then Sixtymile Formation record the accumulation of sediments adjacent to an active fault scarp. The sandstones and siltstones of the Lower Member are inferred to have accumulated within a lake occupying a basin formed by subsidence of the Chuar syncline. The breccias and blocks of dolomite are regarded to be landslide deposits created by the collapse of an active fault scarp associated with the Butte fault zone. The sediments of the Middle Member are inferred to have accumulated in standing water, presumably a lake along the axis of the Chuar syncline as indicated by its very fine grain size, the thin regular bedding, and its bedded chert. The Upper Member consists of fine-grained fluvial and fanglomeratic sandstone and conglomerate that were deposited by a stream that once flowed along the trough of the Chuar syncline. the Sixtymile Formation provides dramatic evidence of active faulting along the Butte fault system.[4][5][6]

Age

Radiometric dating of volcanic ash within the uppermost Walcott Member of the Chuar Group, 1 m below the Sixtymile Formation provides a minimum age for it. U-Pb date of seven zircon fractions, including four single grains, yielded a date of 742±6 Ma. Thus, the Sixtymile Formation accumulated after 742±6 Ma.[7]

See also

References

  1. Timmons, JM, KE Karlstrom, CM Dehler, JW Geissman, and MT Heizler, (2001) Proterozoic multistage (ca. 1.1 and 0.8 Ga) extension recorded in the Grand Canyon Supergroup and establishment of northwest- and north-trending tectonic grains in the Southwestern United States. Geological Society of America Bulletin. 113:163–180.
  2. 1 2 Ford, TD, WJ Breed, and JW Mitchell (1972) Name and age of the upper Precambrian basalts in the eastern Grand Canyon. Geological Society of America Bulletin. 83(1):223-226.
  3. 1 2 Ford, TD, and WJ Breed (1973) Late Precambrian Chuar Group, Grand Canyon, Arizona. Geological Society of America Bulletin. 84(4):1243-1260.
  4. 1 2 3 4 5 6 7 8 9 Elston, DP (1979) Late Precambrian Sixtymile Formation and orogeny at the top of the Grand Canyon Supergroup, northern Arizona. Professional Paper no. 1092, U.S. Geological Survey, Reston, Virginia. 20 pp.
  5. 1 2 3 4 5 6 7 Dehler, CM, SM Porter, and JM Timmons (2012) The Neoproterozoic Earth system revealed from the Chuar Group of Grand Canyon., in JM Timmons and KE Karlstrom, eds., pp. 49-72, Grand Canyon Geology: Two Billion Years of Earth's History. Special Paper no. 489. Geological Society of America, Boulder, Colorado.
  6. 1 2 3 4 5 6 7 Elston, DP (1989) Middle and late Proterozoic Grand Canyon Supergroup, Arizona. In DP Elston, GH Billingsley, and RA Young, RA., eds., pp. 94-105, Geology of the Grand Canyon, Northern Arizona (with Colorado River Guides). American Geophysical Union Fieldtrip Guidebook T115/315 for International Geologic Congress, 28th. American Geophysical Union, Washington DC. 239 pp.
  7. Karlstrom, KE, SA Bowring, CM Dehler, AH Knoll, SM Porter, DJ Des Marais, AB Weil, ZD Sharp, JW Geissman, MB Elrick, JM Timmons, LJ Crossey, and KL Davidek (2000) Chuar Group of the Grand Canyon: Record of breakup of Rodinia, associated change in the global carbon cycle, and ecosystem expansion by 740 Ma. Geology. 28(7):619–622.

Popular Publications

External links

This article is issued from Wikipedia - version of the Friday, April 29, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.