Rongalite

Rongalite
Names
IUPAC name
Sodium hydroxymethanesulfinate
Other names
Sodium formaldehydesulfoxylate, sodium oxymethylene sulfoxylate, Brüggolit
Identifiers
149-44-0 YesY
6035-47-8 (dihydrate) N
ChEMBL ChEMBL2107242 N
ChemSpider 8649 YesY
Jmol interactive 3D Image
PubChem 8999
RTECS number PB0380000
UNII X4ZGP7K714 YesY
Properties
CH3NaO3S
Molar mass 118.10 g/mol
154.14 g/mol, dihydrate
Appearance colorless crystals
Density 1.75 g/cm3, dihydrate
Melting point 64.5 °C (148.1 °F; 337.6 K) dihydrate
600 g/L, dihydrate (approximate)
Acidity (pKa) decomposes at low pH
Structure
pyramidal at S
Hazards
Main hazards non-toxic
R/S statement R: 36/37/38 S:26-36
Related compounds
Related compounds
SO32−, CH2O
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Rongalite, also called Rongalit (registered trademark of BASF), is sodium hydroxymethylsulfinate, or Na+HOCH2SO2. The salt has many names, including also sodium formaldehyde sulfoxylate, and Bruggolite. It is listed in the European Cosmetics Directive as sodium oxymethylene sulfoxylate (INCI). It is water-soluble and generally sold as the dihydrate. The compound and its derivatives are widely used in the dye industry.[1]

Synthesis and reactions

This salt is prepared from sodium dithionite and formaldehyde:

Na2S2O4 + 2 CH2O + H2O → HO-CH2-SO3Na + HO-CH2-SO2Na

This reaction proceeds quantitatively, such that dithionite can be determined by its conversion to Rongalite, which is far less O2-sensitive and thus easier to handle.

The hydroxymethanesulfinate ion is unstable in solution towards decomposition to formaldehyde and sulfoxylate ion. Addition of at least one equivalent of formaldehyde pushes the equilibrium towards the side of the adduct and reacts further to give the bis-(hydroxymethyl)sulfone. Such solutions are shelf-stable indefinitely.

Sodium hydroxymethanesulfinate was originally developed in the early 20th century for the textile industry as a shelf-stable source of sulfoxylate ion, where the latter can be generated at will. In use, when sodium hydroxymethanesulfinate is made acidic, the reducing sulfoxylate ion and formaldehyde are released in equimolar amounts. For safety reasons the generation of formaldehyde must be taken into consideration when used industrially.

NaHOCH2SO2 can essentially be considered to be a source of SO22−. As such it is used both as a reducing agent and as a reagent to introduce SO2 groups into organic molecules. Treatment of elemental Se and Te with NaHOCH2SO2 gives solutions containing the corresponding Na2Sex and Na2Tex, where x is approximately 2. As a nucleophile, NaHOCH2SO2 reacts with alkylating agents to give sulfones.

HO-CH2-SO2Na + 2 C6H5CH2Br → [C6H5CH2]2SO2 + NaBr + CH2O + HBr

Occasionally, alkylation will occur also at oxygen, thus α,α'-dibromoxylene gives both the sulfone and the isomeric sulfinate ester.

Use

The original use of the compound was as industrial bleaching agent and as a reducing agent for vat dyeing.[1] Another large-scale use is as a reducing agent in redox-initiator systems for emulsion polymerization. One of the typical redox pair examples is t-butyl peroxide. A niche use is its use as water conditioner for aquaria as it rapidly reduces chlorine and chloramine and reacts with ammonia to form the innocuous aminomethylsulfinate ion.[2] It is also used as an antioxidant in pharmaceutical formulation.

The compound has, in recent years, been used increasingly in commercial cosmetic hair dye colour removers despite the generation of formaldehyde, a known human carcinogen.

Related compounds

The zinc complex Zn(HOCH2SO2)2 is marketed under the trademarks Decroline, Decolin, and Safolin. This compound is an additive in polymers and textiles.[3]

Sodium hydroxymethanesulfinate is called Rongalite C. Calcium hydroxymethanesulfinate is called Rongalite H.

References

  1. 1 2 D. Schubart "Sulfinic Acids and Derivatives" in Ullmann's Encyclopedia of Industrial Chemistry 2012, Wiley-VCH, Weinheim. doi:10.1002/14356007.a25_461
  2. EP patent 0278515, Günter Ritter, "Chloramine removing means", issued 1988-08-17, assigned to Tetra-Werke
  3. Masciocchi, N.; Rigamonti, C.; Maspero, A. (2005). "Poly[di-μ3-hydroxymethanesulfinato-zinc(II)]". Acta Crystallographica E 61 (12): m2683–m2685. doi:10.1107/S1600536805038237.
This article is issued from Wikipedia - version of the Thursday, March 24, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.