Solder ring fitting

A solder ring fitting, also known by the trademarked name Yorkshire fitting,[1] is a pre-soldered capillary connectors for joining copper pipes used in plumbing.[2]

While less convenient than compression joints and less reliable than flux solder joints, they are useful when fitting in confined spaces and where single handed fitting is required.

Operation

To obtain perfect joins, the inside of the fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. To obtain a durable joint, water must not be poured on the solder joint to cool it. Yorkshire fittings are now made with lead-free solder.

The fittings come in a great variety of configurations, such as Tee-pieces, straight couplers, elbows or bends, reducers (to join pipes of different diameters), stop-ends, and there are versions with screw threads (male or female) at one end to fit taps and galvanized iron pipes.

Valves such as stoptaps & gate valves are also available in solder ring configuration.

See also

References

  1. ↑ Yorkshire, retrieved 2009-11-23.
  2. ↑ Boyce, Robert Michael; Masterman, Arnold (2005), Plumbing: a practical guide for level 2, Nelson Thornes, p. 151, ISBN 978-0-7487-9275-7.
This article is issued from Wikipedia - version of the Saturday, June 07, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.