Sony CDP-101

Sony CDP-101
Manufacturer Sony Corporation
Type CD player
Retail availability 1982–1985

The Sony CDP-101 was the world's first commercially released compact disc player.[1] The system was launched in Japan on October 1, 1982 at a list price of 168,000 yen (approx US$730).[2]

The Japan-only launch was partially because Philips, Sony's partner in the development of the CD format, was unable to meet the original agreed launch date. Rather than agree a full postponement, Sony agreed to delay the launch of the format outside Japan by six months.[3] The Philips CD100 launched in November 1982, [4] although early Philips players contained some Sony components.[5]

In line with the agreement, the system was launched worldwide in March 1983.[6]

Design

CD player Sony CDP-101 exposed at the Museo della Scienza e della Tecnologia Leonardo da Vinci, Milan.

Demonstration CD players from Sony had the disc placed vertically in the machine allowing the CD face to be visible through a transparent front whilst playing. The CDP-101 instead opted for a horizontal tray-loading system. The case and front panel of the system were manufactured from plastic.

The front of the unit featured a vacuum fluorescent display panel to provide information such as track number and playing time, an infrared receiver to allow the use of a remote control and buttons to control playback, open and close the tray and toggle the display between showing elapsed and remaining playing time. The only dial on the machine allowed for the headphone volume level to be adjusted; a 1/4" headphone jack was also located on the front of the unit.

At the back of the unit there are two on/off switches, one labeled Auto Pause and the other Anti Shock. There are two RCA jacks to carry left and right channels of audio; a 26-pin accessory connector is included, presumably for future developments that did not materialize. A heatsink is located at the back of the unit.[7]

The included remote control unit, RM-101, features the majority of the same button controls as on the main system. It omits the open/close button and display toggle, but has numbered buttons not present on the main unit that allow a particular track number to be selected.

The model name CDP-101 was chosen by Nobuyuki Idei, who headed Sony's Audio Division. "101" represents the number 5 in binary notation and was chosen because Idei considered the model to be of "medium class".[8]

Technical

Because of the cost of producing digital-to-analogue converters ("DACs") at the time of its production, the CDP-101 features only one DAC, which is used for both the left and right audio channels. There is no sample-and-hold circuitry to delay the first channel until the other is ready, so the left and right channels are out of sync by approximately 11 µs.[9]

Unlike the Philips CD100 which uses oversampling to overcome the use of a 14-bit DAC, the CDP-101 features a 16-bit DAC, that was designed and manufactured in-house by Sony. The decision to use 16-bit encoding was made at Sony's insistence, as Philips had already developed a 14-bit DAC, and Sony was worried this would give them an advantage in getting their product to market first, should 14-bit encoding have been chosen.

References

External links

Wikimedia Commons has media related to Sony CDP-101.
This article is issued from Wikipedia - version of the Tuesday, April 19, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.