Star-Clipper-Canfield Building and Winding Stairway
|
Star-Clipper-Canfield Building and Winding Stairway | |
 | |
  | |
| Location |
534 2nd St. Traer, Iowa |
|---|---|
| Coordinates | 42°11′36″N 92°27′59″W / 42.19333°N 92.46639°WCoordinates: 42°11′36″N 92°27′59″W / 42.19333°N 92.46639°W |
| Area | less than one acre |
| Built | 1894 |
| Built by | Burlington Iron Works |
| Architect | E.E. Taylor |
| NRHP Reference # | 75000699[1] |
| Added to NRHP | October 29, 1975 |
The Star-Clipper-Canfield Building and Winding Stairway are located in Traer, Iowa, United States. The staircase is thought to be one of a kind in the country, and it was featured on a U.S. commemorative stamp.[2] The exterior winding staircase was designed by E.E. Taylor of Burlington, Iowa, and built by the Burlington Iron Works. The staircase was built outside because there was no room for one inside of the buildings.[2] The Canfield Building, to which it is attached, was built the same year. The Star-Clipper Building was completed in 1888. The complex served as a newspaper office until 1953 when it was converted into commercial use. It was listed on the National Register of Historic Places in 1975.[1]
References
- 1 2 Staff (2009-03-13). "National Register Information System". National Register of Historic Places. National Park Service.
- 1 2 Mike Reuman. "Star-Clipper-Canfield Building and Winding Stairway" (PDF). National Park Service. Retrieved 2016-03-02.
| ||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
This article is issued from Wikipedia - version of the Wednesday, March 02, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.