Steiger (automobile company)

The Steiger company was founded in 1914 as Maschinenfabrik (engine manufactory) Walther Steiger & Co. by the Swiss engineer Walther Steiger (1881–1943) in Burgrieden near Ulm, Germany. In 1921 it became a limited company (Steiger AG). During its short life the firm produced circa 3,000 vehicles.

Steiger. Radiator emblem

The beginnings

Steiger 10/50 PS. Touring car (1922)

During the First World War the Steiger firm repaired aeroplanes and aeroplane engines. In 1917 the owner and his engineer, Paul Henze, began to work on motorized vehicles. Plans for the manufacture of tractors were abandoned in favour of the development of automobiles. Their first model, the Steiger 10/50 PS, was produced in 1920. This touring model with a 2.6 litre four cylinder engine (50 hp / 37 kW) became Steiger’s most significant product, and was still in production when the firm collapsed in 1926. Its modern OHC engine was distinctive because of an overhead camshaft driven by spiral-toothed bevel gear wheels. These cars, with ‘u’ shaped pressed steel frames, two axles with leaf spring suspension and a pointed radiator, were considered to be the most significant technical innovation of the early 1920s[1] and the most progressive German serially-produced cars of their time.[2]

A brief flowering

Walther Steiger driving a Steiger "Sport" 11/55 PS (1922)

In 1922 Steiger produced a two-seated roadster with a larger engine (cubic capacity 2.8 litres, 55 hp / 40 kW) that became available in 1924 as an even more powerful model (cubic capacity 2.9 litres, 70 hp / 51 kW). These types reached a maximum speed of 140 km/h (88 mph) (100 hp racing models could reach a speed of 180 km/h (113 mph))[3] and cost 18,000 Reichsmarks. Those high performance sports and racing models were very successful at racing events (Solituderennen, Avus, Eifelrennen, Klausenrennen, Monza and Targa Florio) in the 1920s.[4] In 1925 came the more powerful touring car, the Steiger 11/55 PS, with an extended wheelbase and the first sports car's engine.

At times the firm occupied up to 500 workers and employees. Despite their high class products that were often compared with those of Bugatti,[5] the firm went bankrupt in the wake of the 1926 automobile crisis.

Steiger-Martini

Martini-Six. Pullman (1927)

After the liquidation of his firm, Walther Steiger joined the Swiss automobile manufacturer Martini where he and his brother Robert had been the major shareholders since 1924. They produced a number of vehicles for Martini, including a 95 hp (70 kW) six-cylinder model. This luxury vehicle with a 4.4 litre engine appeared in Switzerland as Martini-Six and in Germany as 17/100 PS Steiger-Martini.[6]

Following the pattern at Steiger, a number of different racing models were developed, and some achieved spectacular successes (twice reaching the first four in the 1929 Klausenpass race, for example). But these carefully and individually manufactured models could not compete in the long run with cheaper, mass-produced vehicles from Germany, France and America. The end of a brand steeped in tradition was inevitable: on 12 June 1934 the last Martini left the factory in Saint-Blaise on Lake Neuchâtel.

Steiger models

Martini-Six (CH) – 17/100 PS Steiger-Martini (GER)
Type Production Engine Displacement hp Top speed
Steiger 10/50 PS 1920–1926 4 R / OHC 2604 cc 50 hp (37 kW) 95 km/h (60 mph)
Steiger Sport 11/55 PS 1922–1924 4 R / OHC 2826 cc 55 hp (40 kW) 128 km/h (81 mph)
Steiger Sport 12/70 PS 1924–1926 4 R / OHC 2902 cc 70 hp (51 kW) 140 km/h (88 mph)
Steiger 11/55 PS 1925–1926 4 R / OHC 2826 cc 55 hp (40 kW) 100 km/h (63 mph)

See also

Pictures

Sources

References

  1. ↑ v. Fersen (1), loc. cit., p. 300
  2. ↑ Oswald, p. 358
  3. ↑ Schick, p. 67
  4. ↑ Hediger, p. 46 f.
  5. ↑ Kieselbach & Lessing, p. 78
  6. ↑ Jung, pp. 86 ff.

External links

This article is issued from Wikipedia - version of the Saturday, March 05, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.