Stern ST 87 Vega

ST 87 Vega
Role Homebuilt aircraft
National origin France
Designer Rene Stern
First flight July 1992
Status Plans available (2014)
Number built 2 (1998)
Unit cost
US$400.00 (plans only, 1998)

The Stern ST 87 Vega (sometimes ST-87) is a French homebuilt aircraft that was designed by Rene Stern, first flying in July 1992. The aircraft is supplied in the form of plans for amateur construction.[1]

Design and development

The ST 87 Vega features a cantilever low-wing, a two-seats-in-side-by-side configuration enclosed cockpit under a bubble canopy, fixed conventional landing gear with wheel pants and a single engine in tractor configuration.[1]

The aircraft is made from wood, with its flying surfaces covered in doped aircraft fabric. Its 7.62 m (25.0 ft) span wing mounts flaps and has a wing area of 10.0 m2 (108 sq ft). The cabin width is 110 cm (43 in). The acceptable power range is 85 to 125 hp (63 to 93 kW) and the standard engine used is the 108 hp (81 kW) Lycoming O-235 powerplant.[1]

The ST 87 Vega has a typical empty weight of 469 kg (1,034 lb) and a gross weight of 726 kg (1,601 lb), giving a useful load of 257 kg (567 lb). With full fuel of 110 litres (24 imp gal; 29 US gal) the payload for the pilot, passenger and baggage is 175 kg (386 lb).[1]

The manufacturer estimates the construction time from the supplied kit as 2000 hours.[1]

Operational history

By 1998 the company reported that four kits had been sold and two aircraft were completed and flying.[1]

Specifications (ST 87 Vega)

Data from AeroCrafter[1]

General characteristics

Performance

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 200. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1

External links

Wikimedia Commons has media related to Stern aircraft.
This article is issued from Wikipedia - version of the Tuesday, June 23, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.