Stirling radioisotope generator

Component of Stirling radioisotope generator is heated by induction during testing.

The Stirling radioisotope generator (SRG) is a generator based on a Stirling engine powered by a large radioisotope heater unit. The hot end of the Stirling converter reaches high temperature and heated helium drives the piston, heat being rejected at the cold end of the engine. A generator or alternator converts the motion into electricity. Given the very constrained supply of plutonium, the Stirling converter is notable for producing about four times as much electric power from the plutonium fuel as compared to a radioisotope thermoelectric generator (RTG). The Stirling generators were extensively tested on Earth by NASA, but their development was cancelled in 2013 before they could be deployed on actual spacecraft missions.

SRG

Stirling engine development began at NASA Glenn Research Center (then NASA Lewis) in the early 1970s. The Space Demonstrator Engine (SPDE) was the earliest 12.5 kWe per cylinder engine that was designed, built and tested. A later engine of this size, the Component Test Power Converter (CTPC), used a "Starfish" heat-pipe heater head, instead of the pumped-loop used by the SPDE. In the 1992-93 time period, this work was stopped due to the termination of the related SP-100 nuclear power system work and NASA's new emphasis on "better, faster, cheaper" systems and missions.

ASRG

In the early 21st century, a major project using this concept was undertaken: the Advanced Stirling Radioisotope Generator (ASRG), a power source based on a 55-watt electric converter.[1][2] The thermal power source for this system was the General Purpose Heat Source (GPHS). Each GPHS contained four iridium-clad Pu-238 fuel pellets, stood 5 cm tall, 10 cm square and weighed 1.44 kg. The hot end of the Stirling converter reached 650 °C and heated helium drove a free piston reciprocating in a linear alternator, heat being rejected at the cold end of the engine. The alternating current (AC) generated by the alternator was then converted to 55 watts direct current (DC). Thus each ASRG unit would use two Stirling converter units with about 500 watts of thermal power supplied by two GPHS units and would deliver 100-120 watts of electric power. The ASRG underwent qualification testing at NASA Glenn, as a power supply for a future NASA mission. The ASRG was designed into many mission proposals in this era,[3] but was cancelled in 2013.[4]

References

External links

See also

This article is issued from Wikipedia - version of the Thursday, February 11, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.