Specific strength

For the stiffness to weight ratio, see specific modulus.

The specific strength is a material's strength (force per unit area at failure) divided by its density. It is also known as the strength-to-weight ratio or strength/weight ratio. In fiber or textile applications, tenacity is the usual measure of specific strength. The SI unit for specific strength is Pa m3/kg, or N·m/kg, which is dimensionally equivalent to m2/s2, though the latter form is rarely used.

Another way to describe specific strength is breaking length, also known as self support length: the maximum length of a vertical column of the material (assuming a fixed cross-section) that could suspend its own weight when supported only at the top. For this measurement, the definition of weight is the force of gravity at the Earth's surface (standard gravity, 9.80665 m/s2) applying to the entire length of the material, not diminishing with height. This usage is more common with certain specialty fiber or textile applications.

The materials with the highest specific strengths are typically fibers such as carbon fiber, glass fiber and various polymers, and these are frequently used to make composite materials (e.g. carbon fiber-epoxy). These materials and others such as titanium, aluminium, magnesium and high strength steel alloys are widely used in aerospace and other applications where weight savings are worth the higher material cost.

Note that strength and stiffness are distinct. Both are important in design of efficient and safe structures.

Examples

Specific tensile strength of various materials
Material Tensile strength
(MPa)
Density
(g/cm³)
Specific strength
(kN·m/kg or KYuri)
Breaking length
(km)
Source
Concrete 12 2.30 5.22 0.44
Rubber 15 0.92 16.3 1.66
Copper 220 8.92 24.7 2.51
Polypropylene 25-40 0.90 28-44 2.8-4.5 [1]
Stainless steel (304) 505 8.00 63.1 6.4 [2]
Brass 580 8.55 67.8 6.91 [3]
Nylon 78 1.13 69.0 7.04 [4]
Oak 90 0.78-0.69 115-130 12-13 [5]
Inconel (X-750) 1250 8.28 151 15.4 [6]
Magnesium alloy 275 1.74 158 16.1 [7]
Aluminium alloy (7075-T6) 572 2.81 204 20.8 [8]
Titanium 1300 4.51 288 29.4 [9]
Bainite 2500 7.87 321 32.4 [10]
Balsa 73 0.14 521 53.2 [11]
Carbon-epoxy composite 1240 1.58 785 80.0 [12]
Spider silk 1400 1.31 1069 109
Silicon carbide fiber 3440 3.16 1088 110 [13]
Glass fiber 3400 2.60 1307 133 [9]
Basalt fiber 4840 2.70 1790 183 [14]
1 μm iron whiskers 14000 7.87 1800 183 [10]
Vectran 2900 1.40 2071 211 [9]
Carbon fiber (AS4) 4300 1.75 2457 250 [9]
Kevlar 3620 1.44 2514 256 [15]
Dyneema (UHMWPE) 3600 0.97 3711 378 [16]
Zylon 5800 1.54 3766 384 [17]
Carbon nanotube (see note below) 62000 .037-1.34 46268-N/A 4716-N/A [18][19]
Colossal carbon tube 6900 .116 59483 6066 [20]
Fundamental limit 9×1013 9.2×1012 [21]

The data of this table is from best cases, and has been established for giving a rough figure.

The 'Yuri' and space tethers

The International Space Elevator Consortium has proposed the "Yuri" as a name for the SI units describing specific strength. Specific strength is of fundamental importance in the description of space elevator cable materials. One Yuri is conceived to be the SI unit for yield stress (or breaking stress) per unit of density of a material under tension. So, the units for one Yuri are Pa m3 / kg. This unit is equivalent to one N m / kg, which is the breaking/yielding force per linear density of the cable under tension.[23][24] A functional space elevator would require a tether of 30-80 MegaYuri.[25]

Fundamental limit on specific strength

The null energy condition places a fundamental limit on the specific strength of any material.[21] The specific strength is bounded to be no greater than c2 ~ 9×1013kN·m/kg, where c is the speed of light. This limit is achieved by electric and magnetic field lines, QCD flux tubes, and the fundamental strings hypothesized by string theory.

Tenacity (textile strength)

This article is about the measure of textile strength. For the geologic term, see Tenacity (mineralogy). For the herbicide, see Mesotrione. For other uses, see Tenacious.

Tenacity is the customary measure of strength of a fiber or yarn. In the U.S. it is usually defined as the ultimate (breaking) force of the fiber (in gram-force units) divided by the denier. Because denier is a measure of the linear density, the tenacity works out to be not a measure of force per unit area, but rather a quasi-dimensionless measure analogous to specific strength.[26] A tenacity of 1 corresponds to: \frac{1g \cdot 9.80665 m s^{-1}}{1g/9000m}=\frac{9.80665 m s^{-1}}{1/9000m}=9.80665 m s^{-1}9000m = 88259.85 m^2 s^{-2}=88259.85 Yuri=88.25985 kYuri

See also

References

  1. Go to WayBackMachine. Enter:[http://www.goodfellow.com/csp/active/STATIC/A/Polypropylene.HTML]. Choose 2 JUN 2008 for Goodfellow: Polypropylene
  2. "ASM Material Data Sheet". asm.matweb.com. Retrieved 2015-10-20.
  3. "Properties of Copper Alloys". roymech.co.uk.
  4. Go to WayBackMachine. Enter:[http://www.goodfellow.com/csp/active/static/E/Polyamide_-_Nylon__6.HTML]. Choose 9 JUN 2008 for Goodfellow: Polyamide Nylon 6
  5. Go to WayBackMachine. Enter:[http://www.io.tudelft.nl/research/dfs/idemat/Onl_db/Id192p.htm]. Choose 9 OCT 2007 for Delft University of technology: Oak wood
  6. "ASM Material Data Sheet". asm.matweb.com. Retrieved 2015-10-20.
  7. "eFunda: Typical Properties of Magnesium Alloys".
  8. "ASM Material Data Sheet". asm.matweb.com. Retrieved 2015-10-20.
  9. 1 2 3 4 "Vectran". Vectran Fiber, Inc.
  10. 1 2 52nd Hatfield Memorial Lecture: "Large Chunks of Very Strong Steel" by H. K. D. H. Bhadeshia 2005
  11. "MatWeb - The Online Materials Information Resource". matweb.com.
  12. McGRAW-HILL ENCYCLOPEDIA OF Science & Technology, 8th Edition, (c)1997, vol. 1 p 375
  13. Specialty Materials, Inc SCS Silicon Carbide Fibers
  14. "RWcarbon.com - The Source for BMW & Mercedes Carbon Fiber Aero Parts". rwcarbon.com.
  15. Network Group for Composites in Construction: Introduction to Fibre Reinforced Polymer Composites (archived link, January 18, 2006)
  16. "Dyneema Fact sheet" (PDF). DSM (Company). 1 January 2008.
  17. Toyobo Co.,Ltd. "ザイロン®(PBO 繊維)技術資料 (2005)" (free download PDF).
  18. 1 2 Yu, Min-Feng; Lourie, O; Dyer, MJ; Moloni, K; Kelly, TF; Ruoff, RS (2000). "Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load". Science 287 (5453): 637–640. Bibcode:2000Sci...287..637Y. doi:10.1126/science.287.5453.637. PMID 10649994.
  19. 1 2 K.Hata. "From Highly Efficient Impurity-Free CNT Synthesis to DWNT forests, CNTsolids and Super-Capacitors" (free download PDF).
  20. Peng, H.; Chen, D.; et al., Huang J.Y.; et al. (2008). "Strong and Ductile Colossal Carbon Tubes with Walls of Rectangular Macropores". Phys. Rev. Lett. 101 (14): 145501. Bibcode:2008PhRvL.101n5501P. doi:10.1103/PhysRevLett.101.145501. PMID 18851539.
  21. 1 2 Brown, Adam R. (2012). "Tensile Strength and the Mining of Black Holes". arXiv:1207.3342v1.
  22. "Tensile strength of single-walled carbon nanotubes directly measured from their macroscopic ropes" by F. Li, H. M. Cheng, S. Bai, G. Su, and M. S. Dresselhaus. doi:10.1063/1.1324984
  23. Strong Tether Challenge 2013
  24. Super User. "Terminology". isec.org.
  25. "Specific Strength in Yuris". keithcu.com.
  26. Rodriguez, Ferdinand (1989). Principles of Polymer Systems (3rd ed.). New York: Hemisphere Publishing. p. 282. ISBN 9780891161769. OCLC 19122722.

External links

This article is issued from Wikipedia - version of the Friday, May 06, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.